BEOK TGP508 WiFi Touch Screen Thermostat

User Notes

1. Please read this manual carefully. Improper operation may damage the product or cause dangerous conditions.
2. The installation personnel must be well-trained and experienced service technicians.
3. After installation, please read this manual carefully and operate the product according to the instructions.

Caution: Risk of electric shock or equipment damage.

Wiring Diagram

Note: WP for water heating; EP for electric heating; WPB for gas boiler

Diagram Description: The wiring diagram shows connections for different heating systems. It includes terminals labeled L, N, L1, L2, L3, N1, N2, N3, RT, and COM, along with specific configurations for Water Heating (WP), Electric Heating (EP), and Gas Boiler (WPB) systems. Each configuration specifies the voltage (AC100-240V) and current ratings (3A or 16A).

Welcome

Thank you for your trust and support. By adopting higher-end technology and more perfect technology, your new thermostat will provide you with the right temperature environment every day in the future, making your life more comfortable and your living environment more stylish and beautiful. For detailed instructions on the installation and use of this thermostat, please read this manual carefully. Please contact a professional to install the thermostat for you and install and use the product to the extent permitted by law.

Application

The intelligent digital temperature controller is suitable for room temperature control and household temperature control for floor heating systems. It controls the operating state of the floor heating equipment by comparing the ambient temperature with the set temperature, which improves comfort and achieves energy saving. This digital temperature controller adopts microcomputer control technology and is equipped with a full-screen display touch button, which is elegant in design and easy to use. The thermostat has manual, automatic, programmable, and state memory functions.

Technical Data

• 1. Temperature sensor: NTC
• 2. Temperature accuracy: ±1℃
• 3. Power consumption: <1W
• 4. Voltage: AC100-240V 60Hz
• 5. Load current: 3A/16A
• 6. Temperature setting: 5~60°C

Product Packaging

• Thermostat host - 1PC
• Qualification certificate - 1PC
• Sensing line (optional) - 1PC
• Manual - 1 PC
• Screw - 2PCS

Product Model

• GA: Plumbing 3A
• GB: Electric Heating 16A
• GC: linkage, gas boiler 3A
• GE: Plumbing 3A + linkage, gas boiler 3A

Installation Procedure

This product is installed with a standard 86 control switch (in compliance with European regulations).

1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply into the 86 box.
4. Connect the power board to the control board line, and align the buckle at 30 degrees to complete the installation.

Description of Display & Icon

Display Elements:

• TIME ICON: Displays the current time (e.g., 8:88).
• WIFI ICON: Indicates WiFi connectivity status.
• ROOM TEMPERATURE: Displays the current room temperature.
• HEATING ICON: Shows when the heating system is active.
• MODE ICON: Indicates the current operating mode (e.g., AUTO, HOME).
• KEY ICON: Likely indicates a locked or active key function.

Icons:

• TIME ICON: Shows time.
• WIFI ICON: Shows WiFi status.
• ROOM TEMPERATURE: Shows current temperature.
• HEATING ICON: Shows heating status.
• MODE ICON: Shows operating mode.
• KEY ICON: Shows key status.

Operating Instruction

1. Power on/off: Long press M for 3 seconds to turn the thermostat on/off.
2. Mode Switch: Press the M key to switch between manual and automatic modes.
3. Child Lock: Press and for 3 seconds to add or cancel the child lock.
4. WIFI Link: When the thermostat is on, long press the button for 5 seconds. The thermostat display will show "", and the WIFI icon will flash, indicating the thermostat is in code pairing state.
5. Clock Setting: Long press M key and key to enter clock setting. Press M key to switch settings items, press and keys to adjust the value of each parameter. Note: The time of the WIFI model will be automatically obtained from the Internet.
6. Ground Temperature Detection: In the shutdown state, long press key to detect the ground temperature.

Time Programming Instructions

Long press M key and key to enter programming settings. Short press M key to switch options. Press the or key to adjust parameters for each option. Long press M key to exit and save.

Advanced Options

When POWER OFF, press the M key and the key for 3 seconds to enter the advanced option setting. Press M to enter the next option, press and to adjust, and long press M to exit the current level option.

1. Temperature Compensation: The default value of the calibration room temperature is -2°C. Press the up and down keys to adjust. The adjustable range is -9.9°C to +9.9°C.
2. Sensor Selection: The temperature sensor is selected as IN by default. Press the up and down keys to adjust as IN, indicating the internal sensor.
3. Modify the temperature limit: The default temperature limit value is 60°C. Press the up and down keys to adjust the range from 35°C to 60°C.
4. Temperature difference start: The default temperature difference is set to 1°C. Press the up and down keys to adjust the range to 0.5-10 degrees.
5. Antifreeze function: Set the default anti-freeze function to OFF. Display OFF, press the up key to turn on anti-freeze and display ON.
6. Holiday option and turn off weekly programming: 5:Two-day weekend, 6: Single day off, 7:No rest, OFF: Turn off programming.
7. Primary and secondary reverse selection: Set the default main and auxiliary reversal to 00. Press the up and down keys to adjust 0 to turn off the main and auxiliary reversal. 00 means auxiliary reverse, 01 means auxiliary reverse.
8. Sound: NO: Turn on the sound, OFF: Turn off the sound.
9. Set upper temperature limit: The default value of the set temperature upper limit is 60°C, and the adjustment range is 15-95°C by pressing the up and down keys.
10. Backlight brightness: 00: Turn off the backlight, 01: Micro-light, 02: Medium brightness, 03: Highlight.
11. Restore Factory Defaults: Set to restore the factory default setting to display "-". Long press the up button to adjust the display "--", restore the factory settings.

About WiFi Connection

Before using the WiFi thermostat for the first time, you should set the WiFi signal and configuration through your smartphone or tablet to allow communication between your connected devices.

WIFI Link: For Bluetooth thermostat, please turn on mobile phone Bluetooth.

APP Instructions

1. Download the APP: Search for "Tuya" in the App market or scan the QR code to download.
2. Register Account: If you don't have an APP account yet, you can choose to register or log in via SMS verification code. Click "Create a new account". You will enter the Tuya Smart Platform Privacy Policy page. After you click Agree, you will officially enter the mobile phone registration page. The system automatically determines the current country/region. You can also select the country/region manually. After entering your mobile phone number or email address, click "get verification code". Enter the received verification code, then enter the password, and click "finish" to register successfully.
3. Add Device: Click "add device" or "+" on the top right of the APP homepage to enter the "add device" page. Currently, there are two ways to manually add devices and search devices.

Device Pairing Process:

• Find the thermostat product (WIFI model) in the device list. In the specified network mode, the indicator flashes (slowly flashes), and then click the confirm button on the page.
• Select the device's work area to connect to the WiFi of the Internet and enter the WiFi password. Click "ok" to enter the matching network process.

APP Interface Display:

• The APP interface shows the current temperature, mode, and various settings like sound, backlight brightness, temperature calibration, maximum setting temperature, temperature control switch difference, external sensor temperature limit, sensor selection, and frost protection.
• Users can switch between Manual mode, Working day setting, and Week programming settings.
• Advanced settings include child lock, sound, backlight brightness, temperature calibration, maximum setting temperature, temperature control switch difference, external sensor temperature limit, sensor selection, and frost protection.

Troubleshooting (Device not responding):

• Try "Switch Pairing Mode".
• Check if the device has been reset and the indicator is blinking quickly.
• Check if it is a 2.4 GHz Wi-Fi network.
• Verify the Wi-Fi password.
• Retry the connection process.
• Refer to device-pairing FAQs for more help.