OUKITEL P2001E PLUS Portable Power Station User Manual

Thank you for purchasing the P2001E PLUS Portable Energy Storage Power Supply. Please read this manual carefully before use to ensure correct operation. Keep this manual, along with the invoice and other purchase certificates, for product reimbursement.

The product is shipped with approximately 30% charge. Please charge it fully before first use.

Avoid using extension cords or cable taps. Charge the unit directly from wall sockets. When charging multiple devices, do not use other products on the same socket.

Disclaimers

Read this user manual carefully before using the product. Keep it in a safe place for future reference. Incorrect use may cause serious injury, product damage, or property damage. By using this product, you agree to all terms in this manual. The company is not responsible for losses incurred due to failure to follow the User Guide. The company reserves the final interpretation of this document.

Packing List

Portable Energy Storage Power Supply
XT60-MC4 Cable
AC power cord
XT60-Car Charger Cable
User Guide

Specifications

Capacity	Cycle life	Weight	Size	Cigar Lighter*1
LiFePo4 51.2 V	≥3500	22KG	L399W286H320mm	12V/10A
USB-A*2	USB-C*2	USB-C*1	USB-C*1	Output*2
5 V / 2.4 A	PD-20W	PD-45W	PD-100W	12V/3A
AC	AC Input	PV/DC Input
2400 W (JP) AC 100 V 50 / 60 HZ	2400 W (USA) AC 120 V 50 / 60 HZ	2400 W (EU) AC 220 V-240 V 50 / 60 HZ	100-120 V / 1800 W (JP&USA) 200-240 V / 1800 W (EU)	12-60 V / 15 A (MAX) 500 W (MAX)

Product Description

This is a portable energy storage power supply suitable for home emergency backup, outdoor travel, and emergency disaster relief. It can also be used for outdoor work.

The product features a built-in lithium iron phosphate battery and supports AC fast charging, vehicle charging, and solar panel charging. It includes a UPS function, switching to battery power within 10 ms during a utility power outage.

The AC output is a pure sine wave and can be manually converted between 50 Hz and 60 Hz for better appliance protection. It also includes a telescopic dragging trolley bar for easy portability.

Key Components and Operation:

(1) Power switch: Press and hold for 3 seconds to turn the system on/off.
(2) AC switch: Controls the 4 AC output ports. Total power load should be less than 2400W. Long press AC + USB buttons for 3 seconds to switch frequency. Pressing the AC button 10 times cycles through voltage settings (100/110/120V for JP/USA, 220V/230V/240V for EU).
(i) DC switch: Short press to turn DC output ports on/off.
(4) USB switch: Short press to turn USB output ports on/off.
(5) LCD screen: Displays power and usage status.
(6) Cooling air inlet/outlet: Ensure ventilation space of more than 30 CM around these ports. The fan runs automatically when the product reaches a certain temperature.
(7) PV/DC input port: For solar panel charging. Maximum input is 500W with a maximum voltage of 60V. Exceeding 60V can damage the product and void the warranty.
(8) AC power adjustment knob: Selects AC charging power. For fast charging, ensure the power supply voltage meets the specified range (100-120V for JP/USA, 200-240V for EU).
(9) AC charging port: Connect the utility power using the standard AC charging cable. Ensure voltage and frequency match.
(i) Overload protection button: Resets the AC input after an overload or voltage surge. Turn off the power, unplug all ports, confirm no abnormalities, turn power back on, press the overload protection button, and reconnect the AC cable.

Introduction to Display Interface:

The LCD screen displays various statuses:

(1) Using time/charging time
(2) High temperature protection indicator
(3) Low temperature protection indicator
(4) Fan status indicator
(5) Power status indicator
(6) UPS mode indicator
(7) PV charging mode indicator
(8) Total input power
(9) Total output power
(10) Cigarette lighter (12V) output indicator
(11) DC (12V) output indicator
(12) Silent mode indicator
(13) Fast charging mode indicator
(13) Slow charging mode indicator
(13) Overload protection indicator
(16) USB output indicator
(17) PD output indicator
(18) AC output indicator
(19) Frequency Switching indicator
(20) WIFI/Bluetooth indicator

Screen Display Notes:

If the fan icon is on, ensure air inlets are not blocked.
If the temperature icons flash, the internal temperature is too high or too low. The device will stop working until it returns to a normal temperature.
If the utility input icon flashes, the utility input is abnormal. Check the charging end connection.
If the port output icon flashes, the corresponding port output is abnormal. Check the load situation.
Press and hold the USB button for 2 seconds to enter silent mode.

UPS Mode

The product features a bypass mode allowing direct output from AC power without battery use. In UPS mode, if AC input is interrupted, the product switches to battery power within 10 ms.

UPS Connection: Connect the product between the wall socket and the appliance. Ensure the product's power is ON. When the appliance is turned on, it uses grid AC power. If grid power is cut, it automatically switches to the internal battery.

Overload Protection in UPS Mode:

US/Japan Standard: If AC output exceeds 1400W, the UPS icon blinks, indicating overload, and AC output is interrupted.
China/UK/EU/Korea Standard: If AC output exceeds 15A, the UPS icon flashes, indicating overload, and AC output is interrupted.

Solar Panel Connection Solution

The product can be connected to and charged by solar panels. With a 500W solar panel, a full charge can be achieved in approximately 4 hours. Maximum solar input is 500W with a maximum voltage of 60V. Exceeding 60V may damage the device and void the warranty.

Solar Charging Options:

Option 1: Connect a single solar panel array to the PV port using the XT60-MC4 cable.
Option 2: Connect multiple solar panel arrays in series or parallel to the PV port using appropriate connectors and the XT60-MC4 cable. Ensure the total voltage does not exceed 60V.

Solar panel charging power is affected by weather and climate conditions. Solar panels are not included.

Onboard Charging

The product can be charged using a car's cigarette lighter (ACC) via the ACC charging cable. Turn the product's power ON, connect the ACC cable to the car's cigarette lighter and the product's Anderson connector. Start the car engine. The product's LED will show input power.

Note: Onboard charging should be done with the car engine running to prevent draining the car battery. Onboard charging is typically low power (90-240W), resulting in longer charging times. For faster charging, utility power is recommended.

Product Parameters

Product Name	P2001E PLUS
Product size	L399W286H320
Product weight	22 KG
Battery Capacity	2048WH
AC charge	100-120V/15A, MAX 1800W (JP OR USA) 200-240V/15A, MAX 1800W (EU)
PV input	12-60V/15A, 500W max
AC output	100V/2400W (JP), 120V/2400W (USA), 220-240V/2400W (EU) 50/60HZ pure sine wave
USB QC3.0	(5-12V 18W)x2
Type-C	(5-20V/20W) x 2, (5-20V/45W) x 1
Type-C	5-20V/5.0A, 100W max with PD3.0 protocol
DC 5521	12 V / 3 A x 2
Car charger output	12 V / 10 A
UPS	100-120V/1400W (JP/USA), 200-240V/2000W (EU)
Charging temperature	0 ~ 40°C
Operating temperature	-10 ~ 40°C
Ambient humidity	<90% RH
Cycle charge	>3500

Battery Specification

Type	Lithium iron phosphate
Single battery rated voltage	3.2 V
Rated capacity of single battery	20 AH
Battery pack rated voltage	51.2 V
Single cell weight	376 g
Rated capacity of battery pack	2048 Wh

FAQ

Appliance not working despite being within rated power: The product's power may be low and need recharging. Alternatively, the appliance's startup peak power might exceed the product's capacity, or the appliance's nominal power is greater than the product's.
Sound during use: The sound may come from the fan or the relay when the product starts or is in use.
Charging cable heating up: This is normal, as the cable complies with national safety standards.
Battery type: The product uses a lithium iron phosphate battery.
AC output compatibility: The AC output rated power is 2400W (JP), 2400W (USA), 2400W (EU). Ensure the load product's power is less than the rated output.
Determining remaining using time: Check the data on the screen, which shows the remaining using time when the unit is turned on.
Confirming recharging: When charging, the product screen will display the input wattage, and the power percentage indicator will blink.
Cleaning the product: Use a dry, soft, clean cloth or tissue.
Storage: Turn off the product and store it in a dry environment, away from water. For long-term storage, charge to 60% and use/recharge every three months.
Airplane travel: This product cannot be taken on an airplane.
Actual vs. rated output capacity: The manual lists the rated capacity. Actual output capacity is lower due to efficiency losses during charging and discharging.
Maximum output power per AC interface: Each interface has a marked maximum output current. Calculate the maximum output power based on local voltage and current. Do not exceed this limit to prevent product damage.

Maintenance

It is recommended to use or store this product in an environment between 20°C and 30°C, away from water, heat, and metal objects.
For safety, avoid storing the product in environments above 45°C or below -10°C for extended periods.
If not used for a long time, charge the battery to 60% before storing. Storing a depleted battery for extended periods can cause irreversible damage and shorten its lifespan.

	OUKITEL P2001 PLUS Portable Power Station User Manual Comprehensive user manual for the OUKITEL P2001 PLUS Portable Power Station. Learn about its specifications, features, operation, safety precautions, and troubleshooting for this 2400W, 2048Wh LiFePO4 battery power station.
	OUKITEL P5000 Portable Power Station User Manual User manual for the OUKITEL P5000 Portable Energy Storage Power Supply, detailing specifications, features, operation, and maintenance for this 5120Wh/2200W portable power station.
	OUKITEL P5000E Portable Power Station User Manual User manual for the OUKITEL P5000E portable power station, covering specifications, features, safety guidelines, charging methods (AC, solar, car), UPS functionality, and maintenance. Includes detailed product information for optimal use.
	Oukitel P2001E PLUS Portable Power Station User Manual User manual for the Oukitel P2001E PLUS Portable Power Station, detailing its features, specifications, operation, safety precautions, and maintenance.
	OUKITEL P2001 Plus Portable Power Station User Manual Comprehensive user manual for the OUKITEL P2001 Plus Portable Power Station, covering features, operation, safety, and specifications. Get the most out of your portable power solution.
	OUKITEL P1000EPLUS Portable Power Station User Manual Comprehensive user manual for the OUKITEL P1000EPLUS Portable Power Station, detailing specifications, features, operation, safety precautions, UPS mode, solar and car charging, and FAQs. Learn how to use your portable power station for home backup, outdoor adventures, and emergencies.
	OUKITEL BP2000 Portable Power Station User Manual User manual for the OUKITEL BP2000 portable power station, detailing its features, specifications, operation, safety guidelines, and troubleshooting for reliable power backup and off-grid living. Includes information on charging methods, battery expansion, and applications.
	Oukitel P1201 Portable Power Station User Manual Comprehensive user manual for the Oukitel P1201 Portable Power Station. Learn about its specifications, features, operation, safety precautions, charging methods, UPS function, FAQs, and maintenance for this 960Wh LiFePO4 solar generator.