Ninebot eKickScooter C2 & C2 Pro
This document provides the user manual for the Ninebot eKickScooter C2 and C2 Pro.
Diagrams
The following diagrams illustrate the components of the Ninebot eKickScooter C2 and C2 Pro.
Ninebot eKickScooter C2 Diagram
- Bell
- Brake Lever
- Handlebar
- Stem
- Quick-release Lever
- Folding Mechanism
- Front Fender
- Front Fork
- Hub Motor
- Kickstand
- Battery Compartment
- Ambient Light
- Power Button
- Electronic Throttle
- Snap Hook
- Safety Button
Ninebot eKickScooter C2 Pro Diagram
- Bell
- Brake Lever
- Handlebar
- Bluetooth Speaker
- Stem
- Quick-release Lever
- Folding Mechanism
- Front Fender
- Front Fork
- Hub Motor
- Kickstand
- Battery Compartment
- Ambient Light
- Dashboard
- Power Button
- Electronic Throttle
- Snap Hook
- Clamp
- Safety Button
Dashboard & Power Button
The dashboard displays speed, mode, error notifications, Bluetooth connection status, temperature warnings, locking reminders, and battery power.
- Power Button: Press to power on; hold for 2 seconds to power off. Double-press to switch speed modes. Triple-press to toggle ambient light.
- Speedometer: Displays current speed and error codes.
- Speed Mode: Three modes available (D-Standard, S-Sport, E-Assist).
- Indicator (C2 only): Shows status with slow flash, fast flash, or always on.
- Error Notification: Indicates a detected error.
- Bluetooth: Confirms connection to a mobile device.
- Temperature Warning: Alerts when battery temperature is too high (≥55°C) or too low (<0°C).
- Locking Reminder: Indicates the scooter is locked; beeps and tail light flashes if abnormal movement is detected.
- Battery Power: Indicated by 5 bars. A red first bar signifies low battery.
Specifications
Detailed specifications for the Ninebot eKickScooter C2 and C2 Pro are provided below:
| Item | Parameter | Ninebot eKickScooter C2 | Ninebot eKickScooter C2 Pro |
|---|---|---|---|
| Product | Name | Ninebot eKickScooter C2 | Ninebot eKickScooter C2 Pro |
| Model | 051403E | 051404E | |
| Length x Width x Height | Approx. 910 x 400 x 960 mm (35.8 x 15.7 x 37.8 in) | Approx. 910 x 400 x (885/960/1035) mm (35.8 x 15.7 x 34.8/37.8/40.7 in) | |
| Folded: Length x Width x Height | Approx. 910 x 400 x 500 mm (35.8 x 15.7 x 19.7 in) | Approx. 910 x 400 x 500 mm (35.8 x 15.7 x 19.7 in) | |
| Machine | Net Weight | Approx. 10.4 kg (22.9 lbs) | Approx. 10.7 kg (23.6 lbs) |
| Max. Payload | 50 kg (110 lbs) | 50 kg (110 lbs) | |
| Rider | Recommended Age | 6+ | 6+ |
| Required Height | 120-165 cm (3'9"-5'4") | 120-165 cm (3'9"-5'4") | |
| Vehicle | Max. Speed | Approx. 16 km/h (9.9 mph) | Approx. 16 km/h (9.9 mph) |
| Theoretical Range [1] | Approx. 11 km (6.8 miles) | Approx. 17 km (10.6 miles) | |
| Riding Time [2] | Approx. 56 mins | Approx. 1.5 h | |
| Max. Slope | Approx. 5% | Approx. 5% | |
| Traversable Terrain | Mostly smooth roads or normal asphalt, tarmac roads | Mostly smooth roads or normal asphalt, tarmac roads | |
| Operating Temperature | -10-40°C (14-104°F) | -10-40°C (14-104°F) | |
| Storage Temperature | -10-50°C (14-122°F) | -10-50°C (14-122°F) | |
| IP Rating | IPX4 | IPX4 | |
| Battery | Duration of Charging | Approx. 3.5 h | Approx. 4 h |
| Nominal Voltage | 21.6 V === | 25.2 V === | |
| Max. Charging Voltage | 25.2 V === | 25.2 V === | |
| Charging Temperature | 0°C-45°C (32-113°F) | 0°C-45°C (32-113°F) | |
| Nominal Capacity | 2500 mAh | 5000 mAh | |
| Nominal Energy | 54 Wh | 108 Wh | |
| Battery Management System | Protection against overvoltage/undervoltage/short circuit/overcurrent/overheat | ||
| Motor | Nominal Power | 130 W | 150 W |
| Max. power | 160 W | 260 W | |
| Model | NBW25D201D0D | NBW25D201D5N-EU | |
| Charger | Output Power | 24.2 W | 36.3 W |
| Input Voltage | 100-240 V~ 50-60 Hz | 100-240 V~ 50-60 Hz | |
| Max. Output Voltage | 25.2 V === | 25.2 V === | |
| Nominal Output | 24.2 V-1A | 24.2 V 1.5A | |
| Tire | Tires | 7-inch inner hollow shock-absorbing tires | |
[1] Theoretical Range: Tested while riding with a full battery, 110 lbs (50 kg) load, 77°F (25°C), 70% of max. speed on average on pavement. Factors affecting range include speed, load, starts/stops, and ambient temperature.
[2] Riding time under the testing conditions of theoretical range.
Certifications
This product is certified to ANSI/CAN/UL-2272 by TUV Rheinland. The battery complies with UN/DOT 38.3 and ANSI/CAN/UL-2271.
The document also details compliance with various EU directives, including:
- Electromagnetic Compatibility Directive (2014/30/EU)
- Restriction of the use of certain hazardous substances (RoHS) Directive (2011/65/EU and amendment (EU) 2015/863)
- The Safety of Toy Directive (2009/48/EC)
- Radio Equipment Directive (2014/53/EU)
It also includes UK compliance statements for:
- Electromagnetic Compatibility Regulations 2016
- The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
- Toys (Safety) Regulations 2011
- Radio Equipment Regulations 2017
The EU Authorized Representative is Segway-Ninebot Europe, Dynamostraat 7, 1014 BN Amsterdam, The Netherlands.
The UK Authorized Representative is UKCA Experts Ltd., Dept 302, 43 Owston Road Carcroft, Doncaster, DN6 8DA, United Kingdom.
Declarations of conformity can be viewed at: https://eu-en.segway.com/instruction-manuals
Information on Disposal and Battery Recycling
Users are instructed on the proper disposal of electrical and electronic equipment and batteries. This involves not mixing them with unsorted municipal waste and returning them to designated collection points to conserve resources and prevent environmental harm.
Welcome to Segway ,Your Premier Choice for Personal Transportation
Instruction manuals - Segway-Ninebot
