Power Bank A1695 User Guide
This guide provides instructions and specifications for the Power Bank A1695.
At a Glance
An illustration of the power bank shows its front and side. Labeled components include: 1. Retractable USB-C cable (USB-C1), 2. Non-retractable USB-C cable (USB-C2), 3. USB-C port (USB-C3), 4. USB-A port, 5. Power button, and 6. The main display screen showing '100%'.
How to Use the Built-In USB-C Cables
Retractable Built-In USB-C Cable (USB-C1)
To extend the cable, pull it gently. To adjust, pull again, adjust to the desired length, then pull slightly (approx. 0.4" / 1 cm) and stop to set it in place. To retract, pull slightly (approx. 0.4" / 1 cm).
Non-Retractable Built-In USB-C Cable (USB-C2)
Push upward to extend the cable. Pull downward to secure the cable in place.
Screen Display Guide
- Press the power button or pull the retractable built-in USB-C cable (USB-C1) to turn on the screen and check the battery status.
- The screen stays on during charging/recharging. To manually turn off, press and hold the power button for 2 seconds.
- Press the power button twice to activate or exit trickle charging mode.
Checking Battery Status Without Charging/Recharging
If there is no interaction within 10 seconds, the screen will automatically turn off.
Visual description of screen states: Initial screen shows '0.0' and '100%'. Battery status without charging displays battery temperature (e.g., 75°F/24°C SAFE, High Performance Mode) and battery health (e.g., 100% with 10 cycle counts).
Checking Battery Status During Charging/Recharging
If there is no interaction within 10 seconds, the display will automatically switch to the main screen.
Visual description of screen states: Shows 'Pass Through' with percentage and time (e.g., 82.22%, 01H 37M). It also displays charging ports with their respective wattages (e.g., C1 20W, C2 80W, C3 10W, A 0.1W). Battery temperature and health are also shown.
Main Screen Features
Key Displays:
- ① Charging / Output: Shows current output power.
- ② Trickle Charging Mode: Indicates trickle charging is active.
- ③ Recharging / Input: Shows current input power.
- ④ Simultaneous Charging and Recharging / Pass-Through Charging: Displays status when charging other devices while recharging the power bank.
- ⑤ Remaining Battery Percentage: Current battery level.
- ⑥ Full Recharge Time: Estimated time to fully recharge.
Battery Status Under Normal Conditions
Visual descriptions of Battery Temperature (e.g., 75°F/24°C SAFE, High Performance Mode) and Battery Health (e.g., 100%, Cycle Counts: 10).
Active Cooling Mode: Displayed when battery temperature is slightly high, reducing charging/recharging power to cool the power bank.
*Note: Other screen displays are listed at the end of this user guide.
Charging Your Devices
Charge phones, tablets, or laptops using the built-in USB-C cables (USB-C1, USB-C2), the USB-C port (USB-C3), and the USB-A port.
Diagram description: The power bank is shown connected to a laptop via USB-C, a tablet via USB-C, and a smartphone via USB-A. The power bank's screen indicates 'Output 90W 100%'.
Recharging the Power Bank
Recharge the power bank via one of the built-in USB-C cables (USB-C1 or USB-C2) or the USB-C port (USB-C3).
*Note: The power bank cannot be recharged via USB-C1, USB-C2, and USB-C3 simultaneously. When connected to multiple power sources, it automatically selects the one with the highest power for recharging.
Diagram description: The power bank is shown being recharged by three separate USB-C wall adapters connected to its ports. The power bank's screen displays 'Input 90W 82.22% 01H 37M'.
Trickle Charging Mode
To activate trickle charging mode, double-press the power button. The screen displays 'Output 0.1W 100%'. This mode is used for charging low-power devices, such as earbuds connected to the USB-A port. Double-pressing the power button again exits trickle charging mode.
Other Screen Displays
Low Battery Alert
Displayed when the screen is manually turned off during charging/recharging, and the power level is lower than 10%. Visual: A red screen with a phone icon ? and text 'Low Battery Alert'.
Circuit Protection
Displayed when current or voltage abnormality triggers circuit protection. Visual: A black screen with a yellow warning triangle ⚠️ and text 'Circuit protection enabled. Please unplug and replug the device.'
Temperature Protection Mode
Activates when battery temperature is too high or too low, stopping the power bank until the temperature returns to normal.
Visuals:
- High Temperature: Screen displays 'Battery Temperature = 118°F/48°C Protection Non-Recharging Mode' with a red thermometer icon ?️, accompanied by the message 'Please wait for the power bank to cool down before using it.'
- Low Temperature: Screen displays 'Battery Temperature 28°F/-2°C Protection Non-Recharging Mode' with a blue thermometer icon ?️, accompanied by the message 'Please move the power bank to a warmer environment for optimal use.'
Low Battery Health
Displayed when the battery life drops below 60%. Visuals: Screen shows 'Battery Health 60% Cycle Counts: 9,999'. A secondary display states 'Battery health is low. We recommend replacing the product.' with a heart icon ❤️.
Specifications
| Feature | Details |
|---|---|
| Total Capacity | 25,000mAh |
| Battery Capacity | 5,000mAh, 18VDC / 90Wh (Five Cells in Series) |
| USB-C Cable / Port Input | 5-11V 3A / 5V 3A / 9V 3A / 10V 2.25A / 12V 3A / 15V 3A / 20V 5A (100W Max) |
| USB-C Cable / Port Output | 5-11V 3A / 5V 3A / 9V 3A / 10V 2.25A / 12V 3A / 15V 3A / 20V 5A (100W Max) |
| USB-A Output | 5-11V 3A / 5V 3A / 9V 2A / 10V 2.25A / 12V 1.5A (33W Max) |
| Total Output | 165W Max |
