USER MANUAL

1. Product Turn On

This product features automatic detection and identification. It can automatically identify the connected device to start outputting power. If it does not turn on automatically, please press the "Switch Button" to initiate.

2. LED Display

A short press of the button displays the remaining power. When the power bank is operating in fast charging mode (either input or output), a "Lightning" mark will appear on the screen.

The LED display shows the remaining battery percentage. When fully charged, it displays '100%'.

3. Quick Charging

For Type-C and USB identification devices, it takes approximately 10-20 seconds to establish a quick charging connection.

4. Charge the Power Bank

This power bank is equipped with one Type-C input port. Connect it to a compatible phone power adapter to charge the power bank. The LED screen numbers will flash during charging, and the display will show '100%' and remain solid when fully charged.

When the power bank is recharging rapidly, the "Lightning" mark will illuminate on the LED screen.

5. Charge Digital Products

The power bank has one USB-A output port, one Type-C output port, and a built-in Lightning cable output. Connect your digital product (e.g., cell phone, iPad) to any of these output ports to begin charging. The LED display on the power bank will light up during the charging process. The "Lightning" sign will illuminate if the digital device is fast charging. Once the digital product is fully charged, please disconnect the power supply to it, and the LED power indicator will turn off.

Important Notes

• If swelling or liquid leakage occurs during operation, stop using the device immediately.
• If the power bank's Type-C cable, USB port, and Lightning cable are used to charge three mobile devices simultaneously, it may lead to a voltage drop, potentially preventing the maintenance of the highest power output for fast charging. This is normal behavior. Charging a single device typically maintains the highest power output.
• When the remaining power is low, the power indicator will flash as a warning. The device cannot output power in this state.

Safety Precautions

• Fully charge the product before its first use.
• If swelling, leakage, deformation, immersion in water, or short circuit occurs, stop using the device immediately.
• Do not drop the device, or use it in high-temperature, humid, or strong magnetic environments.
• Please keep the power bank out of reach of children.
• Do not leave the product on a car dashboard, as high temperatures caused by strong sunlight can damage the device.
• Do not insert any debris into the input or output ports, as this may cause damage or short circuits.
• To prevent abnormalities during use, please use qualified or cell phone-matching charging cables, power adapters, and other accessories.
• Do not use the all-in-one cable to charge multiple devices simultaneously, as this may damage the power bank.
• Before charging, confirm that your device's input voltage matches the power bank's output voltage.
• Over-discharge may occur if the power bank is left unused for extended periods. To maintain performance, fully charge and discharge the power bank at least every 3 months.

Warnings

• The device contains a Rechargeable Polymer Li-ion Cell. Do not attempt to disassemble the power bank's shell without authorization, as this may damage the cell or cause other dangers.
• Do not disassemble, press, puncture, or short-circuit the device. Do not immerse it in water, expose it to fire, or leave it in environments exceeding 60°C to prevent fire and other hazards.
• The device has overheat protection. It will stop working if the ambient temperature exceeds normal conditions. Place it in a normal environment, and then short-press the button to restore its output.