Ideal Heating Evojet 270kW Commercial Condensing Boiler

Key Features

• Floor standing condensing boiler with triple flue pass and stainless steel heat exchanger.
• Outputs ranging from 150-3000kW, with the 270kW model highlighted.
• High efficiency: up to 109.3% part load efficiency and 96.4% seasonal efficiency.
• Designed for operation down to 40°C AT for minimum flow rates.
• Multiple burner options available (2-stage, Modulating, Low NOx, Ultra Low NOx, Oil, Dual Fuel).
• Modulation via 0-10 volt BMS or RWF controller.
• 2-year warranty.

Technical Specifications

The Evojet 270kW model features a dry weight of 677kg and specific dimensions (1450mm H x 820mm W x 1630mm D). It requires minimum clearances for operation and servicing.

Key technical data includes:

• Fuel: Natural Gas (Type G20)
• Boiler Output: 264.3kW (mean 70°C), 287.6kW (mean 40°C)
• Boiler Input: 299.7kW (GCV)
• NOx Emissions: 65 mg/kWh (GCV EN676), 70 mg/Nm³ (at 3% O2)
• Flue/Air Inlet: 250mm flue size
• Electrical: 230V ± 10% 50Hz, 1 Ph, 6.3A max current, 250W power consumption.
• Hydraulics: Max working pressure 6 bar, 495 litres water content.

Suggested Engineering Specification

This section provides wording for specifiers to ensure the inclusion of Ideal Heating commercial boilers in projects. It outlines requirements for:

• Overview: Fully automatic, floor-standing condensing boiler with triple flue pass and stainless steel heat exchanger, suitable for central heating and domestic hot water.
• Materials: Titanium-stabilised stainless steel for combustion gas contact parts.
• Controls: Options for 2-stage, modulating, BMS 0-10V, or oil/dual fuel burners, with features for set point adjustment, heating circuit control, and safety lock-out parameters.
• Efficiency: High seasonal efficiencies (min 95.8%) and low NOx emissions.
• Approvals: Manufacturer must be ISO 9001 accredited.
• Hydraulics: Suitable for fully pumped sealed water systems, with connections at the bottom or rear.
• Warranty: 2-year warranty.