Compliance proofs for products: LANCOM Systems GmbHlancom-systems.com/SFP-module-MI
Business-Netzwerklösungen „Engineered in Germany“: LANCOM Systems GmbHLANCOM Management Cloud (LMC): LANCOM Systems GmbH
User Guide for LANCOM SYSTEMS models including: XS-3510YUP Managed Access Switches, XS-3510YUP, Managed Access Switches, Access Switches, Switches
LANCOM XS-3510YUP: LANCOM Systems GmbH
File Info : application/pdf, 1 Pages, 553.73KB
DocumentDocument112318 / 0624 LED description & technical details owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their Hardware Quick Reference LANCOM XS-3510YUP Configuration interfaces RJ-45 & micro USB (Console) Connect the configuration interface via the included micro USB cable to the USB interface of the device you want to use for configuring / monitoring the switch. Alternatively, use the RJ-45 interface with the provided serial configuration cable. TP Ethernet interfaces 10M / 100M / 1G PoE+ Use Ethernet cables to connect the interfaces 1 to 4 to your PC or a LAN switch. TP Ethernet interfaces 1G / 2.5G / 5G / 10G PoE++ Connect the interfaces 5 to 8 via Ethernet cable with at least CAT6a / CAT7 standard to your PC or a LAN switch. SFP28 interfaces 10G / 25G Insert suitable LANCOM SFP modules into the SFP28 interfaces 9 to 10. Choose cables which are compatible with the SFP modules and connect them as described in the SFP modules mounting instructions: www.lancom-systems.com/SFP-module-MI. Power connector (device back side) Supply power to the device via the power connector. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord. ATTENTION: High touch current possible! Connect to earth before connecting the power supply. Warning! High touch current. Connect to earth before connecting the power supply. System / Link/Act/Speed / PoE System: off System: green System: red Link/Act/Speed: green PoE: green Device switched off Device operational Hardware error Port LEDs show link / activity status or port speed Port LEDs show PoE status Mode- / Reset button Short press ~5 sec. pressed Pressed until all port LEDs glow Port LED mode switch Device restart Configuration reset and device restart TP Ethernet ports 10M / 100M / 1G PoE+ LEDs switched to Link/Act/Speed mode Off Port inactive or disabled Green Link 1 Gbps Green, blinking Data transfer, link 1 Gbps Orange Link < 1 Gbps Orange, blinking Data transfer, link < 1 Gbps LEDs switched to PoE mode Off Port inactive or disabled Green Port enabled, power supply to connected device Orange Hardware error TP Ethernet ports 1G / 2.5G / 5G / 10G PoE++ LEDs switched to Link/Act/Speed mode Off Port inactive or disabled Green Link 10 Gbps Green, blinking Data transfer, link 10 Gbps Orange Link < 10 Gbps Orange, blinking Data transfer, link < 10 Gbps LEDs switched to PoE mode Off Port inactive or disabled Green Port enabled, power supply to connected device Orange Hardware error SFP28 ports 10G / 25G Off Green Orange Port inactive Link 25 Gbps Link < 25 Gbps Hardware Power supply Environment Housing Number of fans Internal power supply unit Temperature range 040°C; short-term temperature range 050°C; humidity 1090%, noncondensing Robust metal housing, 19" 1U (442 x 44 x 260 mm > W x H x D) with removable mounting brackets, network connectors on the front 2 Interfaces ETH SFP28 4 TP Ethernet ports 10 / 100 / 1,000 Mbps PoE+ 4 TP Ethernet ports 1,000 / 2,500 / 5,000 / 10,000 Mbps PoE++ 2 SFP28 ports 10 / 25 Gbps Package Content Mounting brackets 2 19" brackets for rack mounting Cable 1 IEC power cord, 1 serial configuration cable 1.5 m Mounting & connecting and/or omissions. Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! i Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times. The power plug of the device must be freely accessible. Please note that support for third-party accessories (SFP and DAC) is not provided. Please observe the following when setting up the device For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device Keep all ventilation slots on the side of the device clear of obstruction Mount the device into a 19" unit in a server cabinet using the provided screws and mounting brackets. Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc