Sleep Headphones Mask

Packing List

• 1* Sleep Headphone
• 1* Durable Carrying Bag
• 1* USB Charging Cable
• 1* User Manual

Product Specifications

• Charging Time: About 2 Hours (please charge before use)
• Playing Time: About 10 Hours
• Controls: Power/Hands-free Calling/Stop/Play, Vol Up/Next/1 or 2 Hours Auto Shutdown, Vol Down/Previous

How to Connect BT

1. Open your smartphone/tablet, go to settings and make sure BT is turned on & unpaired from its' previous device.
2. Press & Hold the "on/off" button (⚙️) until red/blue light flash.
3. Find the device name "BT-XOS" and connect.
4. You can enjoy music after BT connection.

Note: BT devices can only be paired on a one-to-one basis. Make sure to disconnect with the previous BT device before attempting to connect a new device. Please unplug the charging cable as well before attempting to connect.

Washing Instructions

Gently slip out the BT module, charging cable, and speakers (which are connected together in 1 piece) from behind the face mask before washing. You may have to gently push the speaker through with your finger to get it past the nose ridge area. Hand washing in warm water is recommended. Please wait 4 to 6 hours for the headphone to fully dry out before re-inserting the BT module, charging cable, and speakers.

Operating Instructions

1. Choose a song or playlist on your connected smartphone/tablet.
2. Press once Play/Stop button (▶️) to start playing, press once again to stop playing.
3. Press Vol- (-) for previous song.
4. Press Vol+ (+) for next song.
5. Press & Hold Vol- (-) will constantly reduce volume to the minimum.
6. Press & Hold Vol+ (+) will constantly increase volume to the maximum.

Automatic Shutoff Timer

1. Double click the Vol+ button (+) for the first time; the voice prompt says "one hour power off". Then after one hour, the headphones will turn off automatically.
2. Double click the Vol+ button (+) a second time; the voice prompt says "two hours shutdown". Then after two hours, the headphones will turn off automatically.
3. Double click the Vol+ button (+) a third time; the voice prompt says "long play" and the headphones will not shutdown automatically.

BT Hands-Free Calling

• For incoming calls, you can press Play/Stop button (▶️) to answer the phone.
• For incoming calls, you can press Play/Stop button (▶️) for 3 seconds to reject the phone.
• During phone calls, you can press Play/Stop button (▶️) for 3 seconds to switch back to headphone.

Charging Instructions

1. Charge your Sleep Headphone by removing the hidden charging cable from inside the mask and connecting it to the provided USB charging cable.
2. Plug the charging cable into a 5V plug for around 2 hours to fully charge. A red light will appear on the headphones indicating that it's charging and will turn blue once fully charged.
3. Once charged, remove the hidden charging cable from the provided USB cable and tuck it back behind the face mask.

Notes

1. Make sure BT is enabled on your phone and find device name "BT-XOS" and connect.
2. Please take out the BT module, cable, and headphones (1 connected piece) before washing.
3. BT speakers are adjustable for all head sizes. Please use your hands/thumbs to adjust speaker positions to desired location.
4. Please check the USB cable if the headphone won't charge.
5. Please adjust the volume on your smartphone/tablet or press & hold Vol+ (+) on the sleep headphone if you can't hear any sound.
6. Do not overcharge as this can decrease the headphone's lifespan.
7. Please disconnect the sleep headphone from the charging cable before connecting by BT to your device.

RF Exposure Statement

This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.