ThermoPro Dual Digital Kitchen Timer

Introduction

Congratulations on your purchase of the ThermoPro Dual Digital Kitchen Timer. This device allows you to accurately track time with its dual timer functionality.

Key Definitions

The timer features a clear digital display. Key components include:

• Display: Shows time, timer status, and settings.
• Low power indication: Alerts when battery is low.
• Timer 1 / Timer 2: Dedicated indicators for each timer.
• Timer mode / Clock setting / Clock mode: Indicators for the device's current operational mode.
• Volume: Indicator for alarm volume level.
• Battery compartment: Located on the back for power.
• Hour setting (HR/+): Button to adjust hours or increase digits.
• Minute setting (MIN/-): Button to adjust minutes or decrease digits.
• Start and Stop button: Button to start, pause, or stop timers.
• Anti-Slip Pads: Located on the bottom for stability.
• Magnet: On the back for mounting.
• Stand: Fold-out stand on the back.

Specifications

1. Display: Dual display for two timers or clock.
2. Dual Timer: Tracks up to two timer events simultaneously.
3. Clock and Date Function: 12/24-hour time format.
4. Adjustable Volume: Four settings: off, low, medium, and high.
5. Backlight: Activated by any button press, lasts 10 seconds.
6. Max Countdown Time: 23 hours 59 minutes.
7. Mounting: Tabletop stand and magnet-mountable design.
8. Power Supply: 2 x AAA batteries (not included).

Buttons and Controls

The timer features several buttons for operation:

• HR/+: Press to set hour (timer mode) or increase digits (clock mode). Press and hold to scroll quickly.
• MIN/-: Press to set minutes (timer mode) or decrease digits (clock mode). Press and hold to scroll quickly.
• START/STOP: Press once to start or pause a timer.
• TIMER 1: Press to set the countdown for Timer 1.
• TIMER 2: Press to set the countdown for Timer 2.
• Selector Switch (Back): Slide to TIMER, CLOCK SET, or CLOCK mode.
• ◄)): Press to cycle through the four alarm volume settings (off, low, medium, high).

Timer Operation

Count Up Setting

1. Slide selector to TIMER mode. The "TIMER" icon will appear.
2. Press TIMER 1 to set up Timer 1.
3. Press START/STOP to begin the count-up timer; press again to pause/stop.
4. To reset to zero: pause the timer, then press HR/+ and MIN/- simultaneously.
5. For a second timer, repeat steps with TIMER 2.
6. Note: The timer continues running in the background even if the display is switched to CLOCK mode (indicated by a flashing "TIMER" icon).

Countdown Timer Setting

1. Slide selector to TIMER mode. The "TIMER" icon will appear.
2. Press TIMER 1 to set the countdown for Timer 1.
3. Press HR/+ to set the hour and MIN/- to set the minutes. Hold buttons to scroll rapidly.
4. Press START/STOP to start or pause the timer. To adjust during countdown, pause first, then press HR/+ and MIN/- together.
5. When the timer reaches zero, it will beep for 1 minute and start counting up. Press START/STOP to silence the alarm and reset the digits to the initial value.
6. To reset after the alarm: If in TIMER mode, press HR/+ and MIN/- together. If in CLOCK/CLOCK SET mode, press any front button to silence the alarm, then slide the selector to TIMER and press HR/+ and MIN/- together to reset.
7. For a second timer, repeat steps with TIMER 2.
8. Note: The timer continues running in the background even if the display is switched to CLOCK mode (indicated by a flashing "TIMER" icon).

Clock Setting

1. Slide selector to CLOCK SET mode. The "CLOCK.S" icon will appear.
2. Press START/STOP, then use HR/+ and MIN/- to select between 12-hour and 24-hour format. Press START/STOP again to confirm.
3. Press HR/+ to increase or MIN/- to decrease the hour and minute digits. Hold buttons to scroll rapidly.
4. Press START/STOP to set the clock time.
5. Use HR/+ and MIN/- to set YEAR, MONTH, and DAY. Press START/STOP after setting the YEAR to confirm and move to MONTH, then DAY.
6. Note: If no button is pressed for 20 seconds, the flashing digits will be saved automatically.

Clock Mode

Slide the selector to CLOCK mode to display the current hour, minute, year, month, and day. Buttons pressed in this mode will not change the displayed digits.

Alarm Volume

The timer offers four alarm volume levels: off, low, medium, and high. Press the ◄)) button to cycle through these settings. In TIMER mode, the display shows:

• [bell-symbol] icon = OFF
• One volume bar = Low
• Two volume bars = Medium
• Three volume bars = High

Backlight Feature

Pressing any button on the timer activates the backlight for 10 seconds. The backlight will automatically turn off if no further buttons are pressed.

Important Safety Information

Pacemaker Warning

CAUTION: The magnet inside this device may affect the functionality of artificial cardiac pacemakers. If you have a pacemaker, maintain a distance of at least 1 foot (0.3 meters) from the device.

Declaration of Conformity

ThermoPro declares that this product complies with the basic requirements and applicable regulations of the EMC Directive 2014/30/EU. The complete declaration of conformity is available at: https://buythermopro.com/eu-declaration-of-conformity/

Disposal Information

Meaning of the "Dustbin" Symbol [recycling-symbol]:

• Protect the environment: Do not dispose of electrical equipment with household waste.
• Recycle: Return unused electrical equipment to designated collection points. This helps prevent potential negative effects on the environment and human health from improper disposal and supports the recycling and reuse of electrical and electronic equipment.
• Local Information: Contact your local authority or waste disposal service for information on available collection points.

Battery Disposal: CAUTION: Batteries and rechargeable batteries must not be disposed of with household waste. Remove spent batteries from the appliance and take them to an appropriate collection point or retailer. Local authorities can provide information on public collection points.

The following symbols on batteries indicate hazardous substances:

• [lead-symbol] (Pb) = contains lead
• [cadmium-symbol] (Cd) = contains cadmium
• [mercury-symbol] (Hg) = contains mercury
• [lithium-symbol] (Li) = contains lithium

Limited One-Year Warranty

ThermoPro warrants this product against defects in parts, materials, and workmanship for one year from the date of purchase. For warranty service, contact ThermoPro Customer Service for instructions on packing and shipping the product. This warranty grants specific legal rights, which may vary by region.

Customer Service

For assistance, contact ThermoPro Customer Service:

• Call or Text (USA & Canada): 1-877-515-7797
• Email: service@buythermopro.com
• Hours: Weekdays 8:00 AM - 8:00 PM EST