ThermoPro TM-01 Digital Kitchen Timer Instruction Manual

Introduction

Congratulations on your purchase of the ThermoPro Digital Kitchen Timer. You will now be able to keep track of time with this digital timer!

Features

• Large LCD screen displays TIMER or CLOCK by switching the selector.
• Backlight display: Touchable backlight button ? or press any button.
• 4 adjustable volume settings: off ?, low ?, medium ?, and high ?.
• 12/24-hour time format for different needs.
• Function: Countdown timer or count up timer.
• Countdown time range: 99 hours, 59 minutes, 59 seconds.
• Count up time range: 99 hours, 59 minutes, 59 seconds, infinite cycled.
• Tabletop and magnet-mountable design.
• 2 AAA batteries included ?.

Key Definition

The timer features a digital display (LCD) showing TIMER or CLOCK mode. Buttons include MODE, HR/+, MIN/-, SEC, START/STOP, and VOL. It also has a BACKLIGHT TOUCH BUTTON, a STAND, a MAGNET, a BATTERY COMPARTMENT, and a BUZZER.

The main display shows:

• TIMER/CLOCK indicator
• HR (Hour)
• MIN (Minute)
• VOL (Volume)
• SEC (Second)
• CLEAR indicator
• Current time/timer value (e.g., 26:09:31)

Buttons

• MODE: Switch between TIMER/CLOCK function.
• HR/+: In TIMER mode, press to set the hour. In CLOCK mode, press to increase the hour digit. Press and hold to quickly scroll through digits. Select between 12/24 hour clock.
• MIN/-: In TIMER mode, press to set the minute. In CLOCK mode, press to increase the minute digit. Press and hold to quickly scroll through digits. Select between 12/24 hour clock.
• SEC: In CLOCK mode, press to increase the second digit. Press and hold to quickly scroll through digits.
• START/STOP: In TIMER mode, press to start or pause the timer. In CLOCK mode, select between hour/minute/second display.
• VOL: Press to cycle through the volume settings: off ?, low ?, medium ?, and high ?.
• Backlight Button (?): Press to activate a backlight. If no further button presses occur for 10 seconds, the backlight will automatically turn off.

Start a Countdown Timer

1. Power on the timer. It should be in the default TIMER mode. If not, press the MODE button to switch modes.
2. Press "HR/+" to set the hour, "MIN/-" to set the minutes, and "SEC" to set the seconds. Press and hold the buttons to increase digits rapidly.
3. Press "START/STOP" to start the timer or pause it.
4. To clear the timer to zero, press "START/STOP" to pause the timer, then press "HR/+" and "MIN/-" simultaneously.
5. When the countdown timer reaches 0:00:00, it will beep and flash for 1 minute, then start to count up. Press "START/STOP" to stop the alarm.

Start a Count Up Timer

1. Press "HR/+" and "MIN/-" together to clear all digits to 00:00:00.
2. Press "START/STOP" to start the count up function.
3. Press "START/STOP" again to pause it.

Set CLOCK

1. Power on the timer and press "MODE" to select CLOCK mode.
2. Press and hold the "START/STOP" button to choose between 12-hour or 24-hour time format. Press "HR/+" or "MIN/-" to switch between 12Hr and 24Hr, then press "START/STOP" again to confirm your selection.
3. Press "HR/+" to increase the hour or minutes, and "MIN/-" to decrease them. Press and hold the buttons to quickly scroll through the digits.
4. Press "START/STOP" to confirm the correct hour, then repeat the process for the minutes.

NOTE: If there is no operation for 20 seconds, the current flashing digits will be saved as the default.

Adjust Alarm Volume

The timer has 4 alarm volume settings. Press the "VOL" button to select between off ?, low ?, medium ?, and high ?.

Backlight Feature

Pressing any button or the touchable backlight button ? will activate the backlight. If no further button presses occur for 10 seconds, the backlight will automatically turn off.

Declaration of Conformity

Hereby, the manufacturer declares that this product complies with the basic requirements and applicable regulations of the EMC Directive 2014/30/EU. The complete declaration of conformity can be found at: https://itronicsamall.com/eu-declaration-of-conformity/

Disposal

Meaning of the "Dustbin" Symbol ?️:

• Protect our environment: do not dispose of electrical equipment in the domestic waste.
• Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.
• This helps avoid the potential effects of incorrect disposal on the environment and human health.
• This will contribute to the recycling and other forms of reutilisation of electrical and electronic equipment.
• Information concerning where the equipment can be disposed of can be obtained from your local authority.

CAUTION: Batteries/rechargeable batteries must not be disposed of with household waste!

• The batteries must be removed from the appliance.
• Take spent batteries to the appropriate collection point or to a dealer.
• Your town or local authority can provide information about public collection points.

The following symbol can be found on batteries/rechargeable batteries which contain hazardous materials:

• Pb = contains lead
• Cd = contains cadmium
• Hg = contains mercury
• Li = contains lithium

Limited One-year Warranty

ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year from the date of purchase.

Should any repairs or servicing under this warranty be required, contact Customer Service by phone or email for instructions on how to pack and ship the product to ThermoPro.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Customer Service

Telephone: 1-877-515-7797 (USA & Canada only)

Telephone: 44-203-769-1321 (UK)

Email: service@buythermopro.com

Hours: Weekdays 8:00 AM - 8:00 PM EST (USA & Canada only)

Hours: Weekdays 1:00 PM - 12:00 AM CET (UK)