Product Overview

This document provides technical specifications and installation guidance for the Paul Neuhaus 826898 SILEDA LED Ceiling Spotlight. The product features three adjustable LED spotlight heads.

Technical Specifications

Energy Efficiency

This product contains light sources of energy efficiency class <E>. (Note: '<E>' is a placeholder; actual class may vary).

Installation Guide

The following steps describe the installation process. Ensure power is disconnected before proceeding.

Step 1: Prepare the Ceiling Mount

Attach the mounting bracket (refer to Diagram 2) to the ceiling using the provided screws (refer to Diagram 3). Ensure the bracket is securely fastened. The mounting holes on the ceiling should accommodate screws with a diameter of approximately Ø6mm.

Step 2: Connect the Wires

Diagram 6.1 illustrates the electrical connections. Connect the mains supply wires to the corresponding terminals in the fixture's junction box:

• Neutral wire (N) to terminal 'a'
• Live wire (L) to terminal 'b'
• Earth wire (ground) to terminal 'c'

Ensure all connections are secure and correctly matched.

Step 3: Secure the Fixture

Align the main ceiling plate (refer to Diagram 8) with the mounted bracket. Secure the fixture to the bracket using the provided screws (refer to Diagram 4). Ensure the fixture is firmly attached to the ceiling.

Step 4: Adjust Spotlights

The three spotlight heads (refer to Diagram 7) can be individually angled and rotated to direct light as desired.

Step 5: Power On

Once installation is complete and all connections are verified, restore power to the circuit. The light should now be operational.

Product Features

The fixture features three adjustable LED spotlight heads. The product is rated IP44, offering protection against splashes of water and solid objects larger than 1mm.