Select Living TipOn Assembly Instructions

Possible Mounting Positions

Illustrations show four different cabinet configurations with the TipOn mechanism installation points indicated:

• Cabinet type 1: Two mechanisms required (x2).
• Cabinet type 2: Two mechanisms required (x2).
• Cabinet type 3: One mechanism required (x1).
• Cabinet type 4: One mechanism required (x1).

Step-by-Step Assembly

1. Prepare the mounting plate. The plate requires fixing points at 32 mm and 16 mm distances.

   [Diagram: Mounting plate with two screw holes marked at 32 mm and 16 mm from an edge.]

2. Position the TipOn mechanism at a 90-degree angle relative to the mounting surface.

   [Diagram: TipOn mechanism body shown at a right angle.]

3. Attach the TipOn mechanism to the mounting plate using a screw. The mechanism engages with the plate.

   [Diagram: Screw being inserted to secure the TipOn mechanism to the mounting plate.]

4. Insert the assembled TipOn mechanism into the designated housing on the cabinet door.

   [Diagram: TipOn mechanism being placed into a recess on a cabinet door.]

5. Push the mechanism until it audibly clicks into place, securing it to the cabinet door.

   [Diagram: Hand pushing the TipOn mechanism, with a "CLICK" indicator.]

6. The TipOn mechanism is now assembled and ready for installation.

   [Diagram: Fully assembled TipOn mechanism.]

7. The TipOn mechanism is installed in the cabinet.

   [Diagram: TipOn mechanism installed in a cabinet door, ready for use.]

8. The mechanism can be adjusted. The adjustment range is +4 mm to -1 mm.

   [Diagram: TipOn mechanism extended, showing adjustment screws or points with markings for +4 mm and -1 mm.]