Special Hinge Assembly Instructions
SELECT LIVING
Assembly Steps
Step 1: Apply Wood Glue
Insert 5 mm dowels into the designated holes. This step involves applying wood glue into pre-drilled holes in a piece of wood.
Step 2: Allow Glue to Dry
Allow the glue approximately 30 minutes to dry. Dowels are then inserted into the glued holes.
Step 3: Ensure Stable Attachment
During this time, the glue will firmly bond with the dowels and the wood, ensuring stable hinge seating. A hinge is attached to the wood with screws.
Door Preparation
Instructions cover preparation for two doors:
Left Door: A diagram shows the outline of a door with dotted lines indicating hinge attachment points.
Right Door: A diagram shows the outline of another door with dotted lines indicating hinge attachment points.
Hinge Installation Detail
A diagram shows a cabinet with doors attached by multiple hinges. A close-up view, labeled "x2 Special Hinge", illustrates a screwdriver securing the hinge to a door panel with two screws. The hinge features mounting points and adjustment screws.
