Garrett Pro-Pointer II Owner's Manual: Features, Specifications, and Operation Guide

An image shows the Garrett Pro-Pointer II metal detector lying in the dirt next to a coin, with the Garrett logo prominently displayed above.

This manual provides comprehensive information for the Garrett Pro-Pointer II, a state-of-the-art pinpointer designed to assist metal detectorists in locating targets with precision.

Key Features

1. ON/OFF Button: The primary control for powering the unit on and off.
2. Pinpointing Tip: The sensitive tip used for precise target location.
3. 360° Side-Scan Area: Allows detection from all sides of the pinpointer.
4. Exclusive Scraping Blade: A rugged edge designed for sifting through dirt to uncover targets.
5. LED Flashlight: Provides illumination and serves as a power-on indicator.
6. Speaker: Emits audio alerts for target detection.
7. Lanyard Attachment Loop: For securing the pinpointer to a belt or pouch.
8. Sealed Battery Cover: Protects the battery compartment.

Operation

Powering On

Press and release the ON/OFF button ([power-button]) while holding the detector away from any metallic objects. You will hear two beeps, and the LED ([led-indicator]) will remain illuminated.

Powering Off

Press and release the ON/OFF button ([power-button]) to power off the unit. A single beep indicates the unit is powering down.

LED Light

The white LED remains illuminated while the unit is on, serving as a power-on indicator and a flashlight when needed.

Lost Pinpointer Alarm

If the Pro-Pointer II is left ON for 5 minutes without a button press, it will begin emitting progressively faster warning chirps for 60 minutes. Pressing the power button off and then back on will reset this alarm.

Auto-Off Feature

After one hour of warning chirps, the Pro-Pointer II will automatically power off.

Scraping Blade Use

This rugged edge is ideal for sifting through dirt while searching for a target. The Pro-Pointer II's 360-degree side-scan detection allows it to alarm when passed in close proximity to a metallic target.

Usage Tips and Maintenance

Lanyard Attachment Clip

Use this clip to attach the Pro-Pointer II to your belt, digging pouch, or your detector, if desired.

Holster

Secure the pinpointer in the provided holster to any standard size belt. Note that a metal snap within the holster will cause the pinpointer to alarm if it is put away while powered on.

Low Battery Alarm

When the battery becomes low, the detector will sound an alternating dual-tone alarm. Replace the 9V battery as soon as possible.

Retuning for Mineralized Ground or Wet Salt Sand

To tune out the detection of saltwater, wet sand, or highly mineralized ground, hold the tip of the Pro-Pointer II to the environment (water, sand, or soil) and quickly press the power button ([power-button]) off and back on again. If necessary, repeat this retune process to further eliminate any environmental response.

Precisely Pinpointing Large Targets

When locating large metal objects, whether in the ground or in a wall, you can improve pinpointing capability by retuning the Pro-Pointer II to narrow the detection field. Slowly scan toward the object until the response increases to a full/constant alarm. Then, without moving the detector, quickly press the power button off and back on again to retune and narrow the detection field. Continue scanning toward the object to find its precise location. Repeat this quick retune process as needed to further narrow the detection field. To return the Pro-Pointer II to its full detection strength, simply switch the power off and back on while holding it away from metal.

Battery Replacement

To replace the battery, rotate the battery cover counterclockwise to remove it and clockwise to tighten it by hand. To properly install the 9V battery, match the larger battery terminal to the larger opening in the compartment. Remove the battery when the unit is to be stored for more than 30 days.

Operational Information and Tips

Operation is completely automatic. All metals, including ferrous and non-ferrous, will be detected.
When a target is detected, the Pro-Pointer II will produce an audio and vibration alert. The rate of pulsing audio and vibrations increases proportionately as the pinpointer is moved closer to a metallic target.
Maximum detection of very small targets is obtained against the side, approximately ½ inch from the tip.
To avoid cancelling out a target, do not turn on the Pro-Pointer II while it is adjacent to the target.
As the Pro-Pointer II is a static, non-motion detector, optimum operation is achieved when the unit is switched off between uses.
Avoid using the Pro-Pointer II as a digging or prying tool. It is designed for flat side-scanning and precise pinpointing with its tip and is not intended for use with excessive force.
Ensure the battery cap threads are free of sand, sediment, etc., and that the O-ring is periodically lubricated with silicone grease to maintain a tight seal.
To remove dried dirt, mud, or other debris from the unit, hand wash with soap, water, and a soft cloth. Rinse with running water. Do not use abrasive or chemical cleaners that could scratch or erode its surface. The Pro-Pointer II is water resistant; however, avoid spraying water directly into the speaker grill and do not submerge the entire detector in water.
Do not affix metallic labels or any material that might cause the detector to alarm to the detection area of the Pro-Pointer II.
The Pro-Pointer's static mode makes it an excellent utility locator for finding metal studs and pipes in walls or nails in drywall. Use a side-scan technique to quickly cover large areas, then use the pinpointing tip to precisely locate the target.

Weather Resistancy and Water Use Information

The Garrett Pro-Pointer II meets IEC 60529 IP66 dust and water-resistancy standards. This allows users to search muddy and wet areas, and to hunt in the rain, without concern of damaging the pinpointer. The detection portion of the Pro-Pointer II may be submerged. It is recommended that the unit not be submerged beyond the power switch.

An image shows a hand holding the Garrett Pro-Pointer II metal detector, demonstrating its use for scanning near a wall or surface.

Specifications

Attribute	Details
Model Name	Garrett Pro-Pointer II
Model Number	1166050
Operating Temperatures	-35°F (-37°C) to 158°F (70°C)
Operating Frequency	12 kHz
Environmental Rating	Weatherproof; IP66
Tuning	Automatic
Indicators	Proportional audio/vibration pulse rate
Controls	Power switch
Dimensions	Length: 9" (22.9 cm) Thickness: 1.5" (3.8 cm) tapered to .875" (2.2 cm)
Weight	6.5 oz. (0.2 kg.), with battery
Battery	Single 9V (included)
Battery Life	Carbon: 16 hours Alkaline: 30 hours Rechargeable: 8 hours
Warranty	2 Years, Limited Parts/Labor
Patent Information	US 7,575,065; D583,261 and patents pending

Manufacturing and Compliance

A graphic displays the American flag with the text 'MADE IN THE USA'.

The Garrett Pro-Pointer II is manufactured in the United States of America and in accordance with Garrett's ISO 9001 internationally certified Quality Management System. It meets the following international standards:

FCC
CE
RoHS
ICNIRP
IEC 529-IP 66

	Garrett Pro-Pointer II Pinpointer User Manual and Specifications Comprehensive owner's manual for the Garrett Pro-Pointer II metal detector pinpointer, covering features, operation, troubleshooting, and specifications. Learn how to use and maintain your pinpointer for optimal performance.
	Garrett Pro-Pointer AT Metal Detector Pinpointer: Features, Specifications, and Operation Guide Comprehensive guide to the Garrett Pro-Pointer AT metal detector pinpointer, detailing its features, operational instructions, safety tips, and technical specifications. Learn how to use its sensitivity settings, fast retune, and other functions for effective metal detection.
	Garrett Pro-Pointer AT Metal Detector Pinpointer: Specifications and Features Detailed specifications and features of the Garrett Pro-Pointer AT, a submersible and sensitive metal detector pinpointer. Learn about its fast retune, single-button operation, LED flashlight, waterproof rating, and more for sport, CSI, and countermine applications.
	Garrett ACE 300 Metal Detector Owner's Manual Comprehensive owner's manual for the Garrett ACE 300 metal detector, covering setup, operation, features, troubleshooting, and maintenance. Learn how to use your detector effectively for treasure hunting.
	Garrett AT Pro International Metal Detector Owner's Manual Comprehensive owner's manual for the Garrett AT Pro International metal detector, covering setup, operation, features, discrimination, sensitivity, ground balance, pinpointing, hunting tips, troubleshooting, and maintenance.
	Garrett Pro-Pointer AT Owner's Manual Comprehensive owner's manual for the Garrett Pro-Pointer AT metal detector pinpointer, covering features, operation, settings, specifications, and maintenance.
	Garrett GT-110 Metal Detector Owner's Manual and Specifications Comprehensive guide to the Garrett GT-110 pinpointer metal detector, covering its features, operation, specifications, and maintenance.
	Garrett Pro-Pointer AT Z-Lynk Metal Detector User Manual Comprehensive owner's manual for the Garrett Pro-Pointer AT Z-Lynk wireless metal detector, covering features, operation, pairing, settings, maintenance, and specifications.