QUICK START GUIDE
1 Power on / off
Connect the AC adapter to the AC IN port on the back of the unit and plug it into a power outlet. To turn the unit on, press the power button ⏻ located on the top panel.
Diagram Description: Shows the back of the boombox with AC adapter plugged in, and a close-up of the power button being pressed.
2 Install batteries (optional)
This unit requires 4 UM-2 1.5V batteries (not supplied). Open the battery compartment on the bottom of the unit, insert the batteries according to the polarity markings, and close the compartment.
Diagram Description: Shows the bottom of the boombox with the battery compartment open, then closed with batteries inserted. An illustration of four UM-2 batteries is also shown.
3 Overview of the main unit
The main unit features the following controls and ports:
- POWER on/off: Turns the unit on or off.
- Volume-: Decreases the volume.
- Prev/Fast rewind/Tun-: Skips to the previous track/preset station, or rewinds.
- Stop/Repeat: Stops playback or sets repeat mode.
- AUX in: Connects external audio devices via a 3.5mm cable.
- Source mode/EQ: Selects the audio source (CD, USB, AUX, Bluetooth, Radio) or EQ mode.
- Volume+: Increases the volume.
- Next/Fast forward/Tun+: Skips to the next track/preset station, or fast forwards.
- Play/Pause/Scan: Starts/pauses playback or scans for radio stations.
- Headphone jack: For connecting headphones.
- USB port: For connecting USB storage devices.
Diagram Description: A front view of the boombox with labels pointing to each control and port.
4 Source modes
Press the MODE/EQ button repeatedly to select the desired source: CD Mode (?), USB Mode (?), AUX IN Mode (?), Bluetooth Mode (?), or Radio Mode (?).
Press and hold the MODE/EQ button to select an EQ mode (e.g., Flat, Classic, Rock, POP, Jazz).
Diagram Description: Shows a finger pressing the MODE/EQ button, and an indicator showing "AUX" on the display. A list of modes (CD, USB, AUX, BT, Radio) and EQ options is provided.
5 Placing a Disc
Open the CD compartment lid. Place a CD inside with the label-side facing up. Close the lid securely. Note: Remove any protective card from the CD before playing.
To control playback:
- Press and hold the ⏪ / ⏩ button for Fast rewind/Fast forward.
- Press the ⏪ / ⏩ button for Prev/Next track.
Diagram Description: Shows a hand holding a CD with a red cross (❌) indicating incorrect handling, then a hand holding a CD correctly with a green tick (✔️). Another diagram shows placing the CD label-side up in the player and closing the lid.
6 Adjust volume
Use the Volume+ and Volume- buttons to increase or decrease the volume. The volume can be adjusted up to level 32.
Diagram Description: Shows hands adjusting the volume using the Volume+ and Volume- buttons on the boombox.
7 Radio Mode
In Radio Mode (?), press the ▷II/SCAN button to automatically scan for stations from low to high. Searched stations are automatically saved as presets.
Press the TUN-/TUN+ buttons to skip to the previous/next preset station. Press and hold TUN-/TUN+ to tune to the previous/next station manually.
Diagram Description: Shows a finger pressing the MODE/EQ button to select Radio Mode, with "FRd" displayed. Another diagram shows fingers using the TUN-/TUN+ buttons.
8 Connect Bluetooth
Select Bluetooth Mode (?) using the MODE/EQ button. The display will show "bt". On your Bluetooth-enabled device (e.g., smartphone), search for available devices and select "LP-D03" to connect.
Diagram Description: Shows a finger pressing the MODE/EQ button to select Bluetooth mode, with "bt" displayed. A smartphone screen shows a successful Bluetooth connection to "LP-D03".
9 USB Mode
Insert a USB storage device into the USB port. Press the MODE/EQ button to select USB Mode (?). The display will show "USB". Note: USB drives up to 16GB, 32GB, and 64GB are supported.
Diagram Description: Shows a finger pressing the MODE/EQ button to select USB mode, with "USB" displayed. A USB drive is shown being inserted into the USB port.
10 AUX IN Mode
Connect an external audio source (e.g., MP3 player) to the AUX IN jack using a 3.5mm audio cable. Select AUX IN Mode (?) using the MODE/EQ button. The display will show "AUX".
Diagram Description: Shows an MP3 player connected via a 3.5mm cable to the AUX IN port on the boombox. The boombox display shows "AUX".