Kränzle K 1050 TS / K 1050 TST Spare Parts List and Technical Data

Introduction

The spare parts list is an integral part of the operating manual. Please keep both leaflets for future reference or for any subsequent owners.

Models Covered: Kränzle K 1050 TS, Kränzle K 1050 TST

Certifications: CE (Conformity European), Warning Symbol [!]

Manufacturer: Josef Kränzle GmbH & Co. KG

Website: www.kraenzle.com

Technical Specifications

Feature	K 1050 TS	K 1050 TST
Operating Press.	130 bar / 13 MPa	130 bar / 13 MPa
Nozzle size	25 03	25 03
Permissible overpressure	160 bar / 16 MPa	160 bar / 16 MPa / 2320PSI
Water output	7.5 l/min at 2,800 rpm	7.5 l/min at 2,800 rpm
max. Water inlet pressure	10 bar / 1.0 MPa	10 bar / 1.0 MPa / 145 PSI
Water inlet temperature	max. 60 °C	max. 60 °C
high-pressure hose	8 m	12 m
Detergent suction	no	no
Hose drum	no	yes
Total stop system (TS)	yes	yes
Connected load	230 V, 9.6 A, 50 Hz	230 V, 9.6 A, 50 Hz
Power input (P1)	2.2 kW	2.2 kW
Power output (P2)	1.65 kW	1.65 kW
Weight	23 kg	26 kg
Dim. incl. pulling handle (mm)	340 x 350 x 860	340 x 350 x 860
Emmisions sound pressure level at the workplace* Lpa	78.8 dB (A)	78.8 dB (A)
Sound power* LWA	91.9 dB (A)	91.9 dB (A)
Recoil at lance	ca. 27 N	ca. 27 N
Vibration at Vario-Jet lance**	1.14 m/s²	1.14 m/s²
measurement uncertainty Vario-Jet**	0.40 m/s²	0.40 m/s²
Vibration at Schmutzkiller lance**	1.34 m/s²	1.34 m/s²
measurement uncertainty Schmutzkiller**	0.84 m/s²	0.84 m/s²
Item no.	49.505 1	49.510 1

* Tested according to DIN EN ISO 3744 and DIN EN ISO 11203 (distance 1m)

** Tested according to DIN EN ISO 5349-1

Permissible tolerance for figures ± 5% acc. to VDMA uniform sheet 24411

Wiring Diagram

Diagram: Schaltplan K 1050 TS / K 1050 TST 230 V 1~/50 Hz

Components:

P (Power input)
Capacitor 35 µF
Terminal (Klemme)
Motor
P1 (Power input)
P2 (Power input)
N (Neutral)
L1 (Live)
PE (Protective Earth)

The diagram shows the electrical connections for the motor, including a capacitor, terminals, and power inputs.

Complete Assembly Spare Parts List

The following tables list the spare parts for the complete assembly of the Kränzle K 1050 TS and K 1050 TST models.

K 1050 TS - Complete Assembly

Diagram Description: Shows the main chassis, wheels, handle, hose holder, cable rewind, motor housing, and other structural components of the K 1050 TS.

Position No	Description	Qty.	Item no.
1	Chassis incl. items 3, 4, 5, 2x 6, 2x 7, 12, 21	1	49.100
2	Front panel "K 1050 TS"	1	49.108 2
3	Chassis cover	1	49.101
4	Lance holder	1	49.102
5	Hose holder	1	49.103
6	Wheel	2	49.109
7	Wheel cap	2	49.110
8	Cable rewind	1	49.002
9	Cable trumpet	1	49.106
10	Plastic screw 5.0 x 20	23	43.018
11	Motor bracket	4	49.111
12	Foot stand left + right	1	49.107
13	Cable clamp	1	43.431
14	Screw 3.5 x 8	2	43.430
15	Screw 6.0 x 30	4	43.423
16	Washer Ø40xØ60x1	2	49.109 1
17	Support axle	1	49.109 2
21	Rubber buffer 25 x 30	2	49.010
26	Screw 5.0 x 14	2	43.426
29	Screw 5.0 x 30	8	43.418
30	Hose NW 6 8 m	1	41.054 1
31	O-Ring 9.3 x 2.4	2	13.273
40	Gun M2001 with DN10 plug system	1	12.475
41	Lance with flat jet nozzle	1	12.900-03
42	Lance with dirtkiller nozzle	1	42.403-03

K 1050 TST - Complete Assembly

Diagram Description: Shows the main chassis, wheels, handle, hose reel, motor housing, and other structural components of the K 1050 TST. Note the presence of the hose drum (item 5).

Position No	Description	Qty.	Item no.
1	Chassis incl. items 3, 4, 2x 6, 2x 7, 12, 21	1	49.100
2	Front panel "K 1050 TST"	1	49.108 1
3	Chassis cover	1	49.101
4	Lance holder	1	49.102
5	Hose reel complete with hose	1	49.151
6	Wheel	2	49.109
7	Wheel cap	2	49.110
8	Cable rewind	1	49.002
9	Cable trumpet	1	49.106
10	Plastic screw 5.0 x 20	23	43.018
11	Motor bracket	4	49.111
12	Foot stand left + right	1	49.107
13	Cable clamp	1	43.431
14	Screw 3.5 x 8	2	43.430
15	Screw 6.0 x 30	4	43.423
16	Washer Ø40xØ60x1	2	49.109 1
17	Support axle	1	49.109 2
21	Rubber buffer 25 x 30	2	49.010
26	Screw 5.0 x 14	2	43.426
29	Screw 5.0 x 30	8	43.418
40	Gun M2000	1	12.475
41	Lance with flat jet nozzle	1	12.900-03
42	Lance with dirtkiller nozzle	1	42.403-03

Motor Spare Parts List

Diagram Description: Exploded view of the motor assembly, showing the motor unit, housing, bearings, fan, capacitor, and electrical components.

Position No	Description	Qty.	Item no.
1	Motor 230V / 50 Hz complete without electrics	1	49.260
4	Air duct cover	1	49.283
5	Motor bearing B-side 6203	1	49.288
6	Motor bearing A-side 7304	1	41.027
7	Oil seal 25 x 35 x 7	1	41.024
8	Fan wheel	1	49.281
9	Shaft retaining ring 17 x 1	1	49.282
10	Stator bearing bolt	2	49.284
11	Rubber seal	1	49.287
12	Fan clamp 3-pole	1	43.326
13	Switch box base	1	49.104 1
14	On/Off switch	1	49.112 1
15	Grommet for mains cable	1	49.115
16	Grommet for pressure switch cable	1	49.115 1
17	Stator rubber bearing	4	49.285
18	Capacitor 35µF	1	41.114 4
19	Mains connection cable for 3 x 1.0 mm² (EU)	1	49.114
19.1	Mains connection cable for 3 x 1.0 mm² (GB)	1	49.121
19.2	Mains connection cable for 3 x 1.0 mm² (CH)	1	49.120
19.3	Mains connection cable for 3 x 1.0 mm² (SA)	1	49.123
19.4	Mains connection cable for 3 x 1.5 mm² (IL)	1	43.494
21	Screw 3.5 x 20	2	43.415
22	Hexagon socket screw M6 x 16	4	44.831
24	Pan head screw M4 x 10	1	43.470
25	Switch box cover	1	49.105
26	Cover seal	1	49.113
27	Plastic screw 5.0 x 20	4	43.018
28	Cable overcurrent release	1	49.126
29	Overcurrent release 1-pole 14 A	1	49.125 0
30	Screw M 6 x 25	4	44.234
31	Washer 4.3	1	43.471
41	Switch box complete (Items 11-15, 18, 21, 22, 25-27)	1	49.150

Gearbox Spare Parts List

Diagram Description: Exploded view of the gearbox assembly, showing the housing, seals, springs, plungers, and bearings.

Position No	Description	Qty.	Item no.
1	Housing plate	1	49.200
2	Oil seal 12 x 20 x 5	3	43.081
3	O-Ring 75.92 x 1.78	1	49.201 1
4	Plunger spring	3	49.203
5	Spring washer Ø12mm	3	49.219
6	Plunger 12 mm AC with shaft retaining ring	3	49.209
7	Shaft retaining ring Ø12mm	3	49.230
8	Swashplate 10.0°	1	49.202-10.0
9	Oil filler plug	1	43.437 2
10	Axial ball bearing 3-piece	1	49.208
13	Screw M 6 x 30	3	43.037
14	O-Ring 13 x 2.6	1	15.017

Oil Change

If oil needs to be changed during repair, the unit is to be turned into a horizontal position with its head upside down prior to unscrewing the drain plug over a container. The oil is to be captured in a container and subsequently properly disposed of. Then screw the oil plug back on again over a container. Use a small funnel when refilling with fresh oil.

Fresh oil: 0.1 l - Kränzle Gear Oil (40.092 2) or W 15/40.

Unloader / Pressure Switch Spare Parts List

Diagram Description: Exploded view of the unloader and pressure switch mechanism, detailing valves, springs, seals, and electrical components.

Position No	Description	Qty.	Item no.
7	O-Ring 12 x 2	2	15.005 1
8	O-Ring 11 x 1.5	1	12.256
9	Stainless steel seat	1	14.118
10	Retaining ring	1	13.147
11	Unloader relief valve	1	49.041 1
12	Steel spring	1	49.042
13	Screw plug	1	49.043
14	Control piston 6 mm for AZC with seals	1	49.243 1
15	Parbaks for piston 14 mm	1	14.123 1
16	Parbaks for spindle 6 mm	1	14.123 2
18	Piston guide 6 mm	1	14.130 1
20	Spring for AZ-Pump	1	43.046
21	Pressure nut	1	49.243 0
49	Pressure spring 1 x 8.6 x 30	1	40.520
50	O-Ring 3.3 x 2.4	1	12.136
51	Guide part for control piston	1	49.058 0
52	O-Ring 13 x 2.6	1	15.017
53	O-Ring 14 x 2	1	43.445
54	Parbaks 4 mm	2	12.136 2
55	Support washer	2	15.015 1
57	Control piston long	1	15.010 2
58	Parbaks 10 mm	1	15.013
59	Stop plug M10x1 (drilled)	1	13.385 1
60	Housing for electric switch	1	15.204
61	Rubber sleeve	1	15.202
62	Hexagon nut M 4	2	12.138
63	Cap nut PG 11	1	15.203
64	Cable 2 x 1.5 mm²	1	49.023
65	Sheet metal screw 2.8 x 16	6	15.024
66	Cover for electric switch	1	15.201
67	O-Ring 44 x 2.5	1	15.023
68	Microswitch	1	15.018
69	Cylinder screw M 4 x 22	2	15.025
71	Repair set for pressure switch mechanism	1	15.009 3
72	Pressure switch complete without mechanism	1	49.054
73	Valve housing complete for K1050 TST	1	49.152 2
73.1	Valve housing complete for K1050 without hose reel	1	49.152 1
74	Repair set for unloader valve	1	49.2440

Valve Housing Spare Parts List

Diagram Description: Exploded view of the valve housing, showing the housing, valve plugs, seals, springs, and filter components.

Position No	Description	Qty.	Item no.
1	Valve housing	1	49.401
2	Valve plug with integrated valve	6	43.066
3	O-Ring 10 x 2	6	43.068
4	O-Ring 12 x 2	6	15.005 1
5	Sealing plug M8 x 1	4	13.158
6	Sealing plug M10 x 1	1	43.043
8	O-Ring 11 x 1.5	3	12.256
9	Stainless steel seat	1	14.118
10	Retaining ring	1	13.147
11.1	Steel ball 10.0 mm	1	12.122
12	Aluminum sealing ring	3	13.275 1
13	Screw connection Ermeto R1/4" x 8 mm (TST)	1	41.042
13.1	Plug 1/4" (TS)	1	13.387
14	Leakage ring	3	49.206
15	Spacer ring with support	3	49.205
16	Gasket 12 x 20 x 5.2	3	49.226
16.1	Gasket 12 x 20 x 5.3/2.8 (Fabric)	3	43.075
17	O-Ring 22 x 2	3	49.225
18	Hexagon socket screw M 6 x 80	4	49.227
34	Return spring	1	14.120 1
35	Outlet piece (TST)	1	40.522
35.1	Outlet part for ball check valve (TS)	1	40.522 1
40	Water inlet filter	1	13.311
52	O-Ring 18 x 2	1	40.016
60	Repair set valves	1	43.096 1
61	Repair set gaskets	1	49.242
62	Repair set check valve	1	44.566

Hose Reel Spare Parts List

Diagram Description: Exploded view of the hose reel assembly, showing side panels, reel part, kink protection, crank handle, and hose.

Position No	Description	Qty.	Item no.
1	Side panel	2	48.101
2	Reel part	1	48.102
3	Kink protection	1	40.162
4	Plastic screw 5.0 x 20	5	43.018
5	Drive shaft	1	48.104 1
7	Bearing block left	1	49.117
8	Screw 6.0 x 30	4	43.423
9	Bearing block right	1	49.118
10	Connecting pipe	1	49.402
11	Water inlet part incl. item 18	1	49.122
12	O-Ring 6 x 0.8	2	40.177
13	Crank handle	1	48.108
14	Screw M 5 x 14	1	40.536
15	Washer Ø 5.3	1	50.152
16	Shaft retaining ring 22 mm	2	40.117
17	O-Ring 9.3 x 2.4	1	13.273
18	Seal set	1	13.410 1
19	High-pressure hose 12m NW6	1	49.116
25	Hose reel complete with HD hose	1	49.151

Lance, Gun & Dirtkiller Spare Parts List

Lance and Gun

Diagram Description: Exploded view of the high-pressure gun and lance assembly.

Position No	Description	Qty.	Item no.
1	Gun housing right + left	1	12.450
2	Screw 3.5 x 14	10	44.525
5	Jet nozzle 03	1	26.020-03
6	Nozzle protection Jet nozzle	1	26.021
7	Nipple for quick coupling DN10; M 12 x 1 IG	1	13.440
10	Repair set M2000 Midi-mechanics	1	12.461

Dirtkiller

Diagram Description: Exploded view of the dirtkiller nozzle assembly.

Position No	Description	Qty.	Item no.
1	Spray body	1	41.950
6	O-Ring 16 x 2	1	13.150
11	Protective cap	1	41.952
12	Rear cap for dirtkiller 03	1	41.953-03
20	Repair set dirtkiller 03	1	41.955-03

	Kränzle Profi TST Series Spare Parts List and Technical Data Comprehensive spare parts list and technical specifications for Kränzle Profi 160 TST, Profi 175 TST, and Profi 195 TST high-pressure cleaners, including diagrams and part numbers.
	Kränzle HD 7/122 TS High-Pressure Cleaner Operating Manual and Spare Parts List Comprehensive operating manual and spare parts list for the Kränzle HD 7/122 TS high-pressure cleaner. Includes technical specifications, wiring diagrams, and detailed parts breakdowns for various components.
	Kränzle K 1322 TS High-Pressure Cleaner Operating Manual Comprehensive operating manual for the Kränzle K 1322 TS high-pressure cleaner, covering safety instructions, product description, general rules, functional details, operation, maintenance, troubleshooting, accessories, technical data, and spare parts.
	Kränzle K 2000 Series High-Pressure Cleaners Operating Manual Comprehensive operating manual for Kränzle K 2000 series high-pressure cleaners (K 2160 TS, K 2160 TST, K 2175 TS, K 2175 TST, K 2195 TS, K 2195 TST), covering safety, operation, maintenance, and troubleshooting.
	Kränzle K 1152 TS / TST High-Pressure Cleaner Operating Manual Comprehensive operating manual for Kränzle K 1152 TS and K 1152 TST high-pressure cleaners. Covers safety instructions, product description, operation, maintenance, troubleshooting, and accessories.
	Kränzle K 1152 TS / K 1152 TST High-Pressure Cleaner Operating Manual Comprehensive operating manual for the Kränzle K 1152 TS and K 1152 TST high-pressure cleaners. Covers safety instructions, product description, general rules, functional details, operation, maintenance, and troubleshooting.
	Kränzle High Pressure Cleaner Parts & Accessories Catalogue Comprehensive parts and accessories catalogue for Kränzle high-pressure cleaning equipment, featuring trigger guns, lances, nozzles, hoses, filters, and repair kits. Includes product specifications and order numbers for maintenance and repair.
	Kränzle Catalogue des Accessoires pour Nettoyeurs Haute Pression Découvrez le catalogue complet des accessoires Kränzle pour nettoyeurs haute pression. Trouvez des lances, buses, tuyaux, pompes et autres pièces de rechange de haute qualité pour professionnels.