Sharper Image 703304 Back Lift Pro Adjustable Bed Backrest

Introduction

This user manual provides essential information for the safe and effective use of the Sharper Image 703304 Back Lift Pro, an adjustable power lifting bed backrest designed to enhance comfort and support while in bed. Please read this manual thoroughly before operating the device.

Safety Precautions

⚠️ Warning: Read all instructions before use.

• Ensure the bed frame is stable and capable of supporting the weight of the backrest and user.
• Do not operate the backrest near water or in damp environments.
• Keep children and pets away from the device during operation.
• Disconnect power when not in use or during cleaning.
• Do not attempt to repair the unit yourself. Contact customer support.
• Ensure all connections are secure before use.
• Do not exceed the maximum weight capacity specified in the technical specifications.

? Note: This device is intended for use by individuals who require elevated support while in bed. It is not a medical device unless prescribed by a healthcare professional.

Package Contents

Your Sharper Image 703304 Back Lift Pro package should contain:

• Adjustable Backrest Frame
• Motor Unit
• Hand Control Remote
• Power Adapter
• Mounting Hardware (screws, brackets)
• User Manual (this document)

If any items are missing or damaged, please contact Sharper Image customer support immediately.

Setup and Installation

Follow these steps to set up your Back Lift Pro:

1. Unpack: Carefully remove all components from the packaging.
2. Attach Motor Unit: Secure the motor unit to the backrest frame using the provided screws. Ensure it is firmly attached.
3. Connect Remote: Plug the hand control remote into the designated port on the motor unit.
4. Connect Power: Plug the power adapter into the motor unit and then into a standard electrical outlet.
5. Positioning: Place the assembled backrest onto your bed. The base should rest securely on the mattress or bed frame. Ensure there is adequate clearance for the backrest to move freely.
6. Secure (Optional but Recommended): For added stability, use the provided mounting hardware to secure the base of the backrest to the bed frame. Refer to Diagram 1 for recommended attachment points.
   Diagram 1 Description: A schematic illustration showing the base of the backrest positioned against the bed frame. Arrows indicate where to place the mounting brackets and insert screws to secure the unit to the frame.

Operation

Use the hand control remote to operate the backrest:

• ⬆️ Up Button: Press and hold to raise the backrest to your desired position.
• ⬇️ Down Button: Press and hold to lower the backrest.
• ⚡ Power Indicator: The light on the remote indicates the unit is powered on.

Important: Do not force the backrest to move beyond its limits. Always ensure the area around the backrest is clear before operation.

Care and Maintenance

• Cleaning: Wipe the frame and remote control with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
• Storage: When not in use for extended periods, unplug the device and store it in a dry, safe place.
• Inspection: Periodically check all connections and hardware for tightness and wear.

Troubleshooting

Technical Specifications

Warranty Information

This product is covered by a limited warranty. For details, please refer to the warranty card included in the package or visit SharperImage.com.

Contact Information

For questions or support regarding your Sharper Image 703304 Back Lift Pro, please contact Sharper Image customer service through their official website at SharperImage.com.