Bestway Built-in Foot Pump Airbed Instructions

Preparation

Unroll the bed onto a flat area free from objects and debris. The flocked side should be facing up and the PVC side should be on the ground.

Important Note

Please read instructions carefully before using this airbed.

Product Information

Bestway offers two ways to inflate the airbed.

Warning

1. Keep away from heat sources and fires.
2. Avoid sharp and rough objects, or the airbed may get damaged.
3. Do not over-inflate or jump on the airbed, doing so may decrease the airbed's life span.
4. The airbed is not a life-saving device, do not use in water.
5. Exclusively designed for air beds.

NOTICE: Read the instructions completely and save these instructions. Retain this booklet for future reference.

CAUTION: There are risks when you use the article in the open and/or watercraft.

6. The airbed is not a toy; children should be supervised to ensure that they do not play with the airbed/valve.

Inflation

Built-in Foot Pump

Locate the foot pump and remove the white rubber plug from the suction port. Depress the foot pump area to inflate the bed. Be sure to depress the pump straight down. Your foot should completely cover the suction port while depressing the foot pump, this will keep the air from escaping the inflation chamber back through the suction port. Lift your foot completely off of the hole in order to have the suction port refill the chamber. Continue until the bed reaches proper firmness and most of the wrinkles are gone. Insert the white rubber plug back into the suction port and screw on the plastic cover. The airbed is ready for use. (FIG 1)

Air Pump

Open the valve; inflate the bed with an air pump and close the valve once inflated. (FIG 2)

NOTE: Air pump is not included.

After use, the airbed may require additional air to increase firmness; add air according to your desired firmness.

Deflation

Open the valve to deflate. (FIG 3)

Disposal

If the product is out of service, please cut it and dispose of it according to your local council. Dispose of the package carefully and thoughtfully. Do not litter. To be a good citizen and dispose of litter in an environmentally manner.

Repairing

If the airbed surface is damaged, use the provided repair patch.

To repair:

1. Completely deflate the airbed.
2. Clean and dry the damaged area.
3. Apply a repair patch and smooth out any air bubbles.

NOTE: Never use other liquid glue or adhesive fabric; only use the repair patch like the provided one.

Cleaning & Storage

1. If the airbed is dirty, use a clean damp cloth and gently wipe down the surface. Be sure to dry the airbed before storing. Check the product for damage at the beginning of each season and at regular intervals when in use.
2. Once deflated, carefully fold the airbed and store in a cool, dry location away from chemicals and heavy, or sharp objects.

NOTE: Do not use harsh detergents that may damage the airbed.