Bigme B13 Color ePaper Monitor

Product Appearance Description

The Bigme B13 features a 13.3-inch E Ink color display. The device includes:

• 1. Speaker Hole: Located on the side.
• 2. 3.5mm Earphone Jack: For audio output.
• 3. Infrared Receiver: For remote control input.
• 4. Screen: The main display area.
• 5. Power Button: Used for powering the device on/off and other functions.
• 6. Type-C Power Port: For connecting the power adapter.
• 7. Type-C Interface: For video signal input and other data.
• 8. Mini HDMI Interface: An alternative video signal input.
• 9. Indicator Light: Shows device status.
• 10. Anti-slip Pad: Located on the bottom for stability.

Power Button Operation Instructions:

• Power On: Press and hold the power button for 2 seconds when the power adapter is connected. If the power adapter is not connected, connect it to power on directly.
• When Powered On: Short press to refresh the entire screen, clearing residual images. Double-click to open the display menu.
• Power Off: Press and hold the power button to turn off the device.

Specifications Table

Remote Control Button Instructions

The remote control provides access to various functions:

• Power Button: Turns the device on or off.
• Front Light Adjustment: Press to activate, then use directional keys to adjust brightness.
• Full Refresh: Refreshes the entire screen.
• Mute: Toggles audio mute.
• Directional and Confirm (OK): Navigates menus and confirms selections.
• Display Mode Switch: Changes between different display modes.
• Back: Returns to the previous screen or menu.
• Input Source Switch: Changes the input signal source.
• Volume Down: Decreases audio volume.
• Menu: Opens the display settings menu.
• Volume Up: Increases audio volume.

*Front Light Adjustment: Press the front light adjustment button, activate the front light adjustment function, then use the directional keys (up, down, left, or right) to adjust the front light brightness.

Computer Display Functions

I. Connection Method

Step 1: Power Supply

Connect the power adapter to the Type-C power port to supply power to the display.

Step 2: Connect Video Signal Cable

Connect the display using a Type-C to Type-C cable or an HDMI to Mini-HDMI cable.

II. Selecting the Appropriate Resolution

It is recommended to use a 4:3 aspect ratio computer resolution for optimal screen coverage on the Bigme B13. For example, in Windows 10, right-click on the desktop, select "Display settings", choose "3200*2400", and then "Keep changes". Adjust the system text scaling as desired; a higher percentage results in larger text.

III. Picture Quality Mode Settings

Adjust the "Picture Quality Mode" and "Contrast" settings to achieve the best picture quality. Contrast can be adjusted in different picture quality modes. For viewing images, it is recommended to reduce the contrast for more detail. For text, increase the contrast for better readability.

★ Optimizing Your Computer for Better ePaper Display Effect (Must Read)

1. Ensure any eye-care software or night mode on your computer is turned off.
2. It is recommended to set your computer's desktop background to a pure white theme. This helps reduce residual images, making the screen cleaner and text sharper. For Windows 10, right-click on the desktop, select "Personalize", go to the "Background" section, choose "Solid color", and select pure white.
3. Set your computer to "Best performance" and disable visual effects. For Windows 10, right-click "My Computer" (or "This PC"), select "Properties", then "Advanced system settings". In the "Advanced" tab, under "Performance", select "Settings", choose "Adjust for best performance", and click "OK". To disable visual effects, go to "Ease of Access" settings, select "Display", and turn off "Show animations in Windows" and "Enable transparency effects in Windows".

Mobile Device Support

The Bigme B13 supports wireless screen mirroring and wired connections with mobile devices that have video output capabilities, such as some Huawei and Samsung phones. However, due to variations in mobile hardware and systems, full support or perfect compatibility is not guaranteed.

Connection Methods

1. Wired Connection: Connect the power adapter to the Type-C power port for power. Then, use the provided Type-C data cable (or another Type-C cable with video transmission capabilities) to connect to the Type-C video interface for screen mirroring.
2. Wireless Screen Mirroring: With the display powered on, double-click the button on the right side of the display to open the menu. In the "Input Swap" menu, switch to "Miracast" mode. Alternatively, use the remote control's "匄" (Input Source Switch) button to switch to "Miracast" mode. Follow the on-screen prompts to connect your casting device.

【Important】 How to Properly Turn Off the Display

To protect your display and prevent potential screen damage, please follow these steps when the display is not in use: First, press the "<0xE5><0x90><0x8C>" (same/similar) button on the display to turn it off. Second, unplug the display's power cord to completely disconnect power.

Stand Usage

The magnetic protective case can be used as a stand by attaching it to the magnetic area on the back of the display.

Warranty Information

The Bigme B13 ePaper display comes with a one-year statutory warranty according to national regulations. Warranty services include:

1. A 7-day trial period from the date of receipt, during which returns or exchanges are possible.
2. Free repair for performance failures within one year from the date of receipt.

*For regions or countries outside mainland China, there are no physical service outlets; only online or phone support is available.

【Conditions Not Covered by Warranty】

To protect your legal rights and avoid unnecessary losses, Bigme is not responsible for equipment malfunctions or damage caused by the following reasons. Paid services are available for these situations:

1. Exceeding the warranty period.
2. Damage caused by failure to install, use, maintain, or care for the product as per the user manual (human-induced damage).
3. Damage caused by disassembly by unauthorized Bigme repair personnel (self-repair).
4. The screen may have a certain number of dead pixels (less than 5) that meet factory standards. These are not covered for return or exchange.
5. Natural aging, bumps, or scratches on the product's outer casing.
6. Damage caused by accidental factors or human actions, including operational errors or inputting incorrect voltage.
7. Damage caused by force majeure events such as earthquakes, fires, or floods.

For services outside the free warranty scope, a fee will be charged (fee standard = technical service fee + replacement parts fee + logistics and shipping fee).

Warranty Card

User Name:

Contact Number:

Detailed Address:

Product Model:

Serial Number (SN):

Problem Description:

Manufacturer: Bigme Cloud Literacy Technology Co., Ltd.

National Customer Service Hotline: 400-0188-938

Address: 1.18 f., COFCO Group Building, No. 3, Longjing 2nd Road, Longjing Community, Xin'an Street, Bao'an District, Shenzhen, China