A11 Smart Dimmer Switch: Matter App Access Operation Instructions

Important Notes

• As software evolves, the latest user interfaces may differ slightly from what is described in this instruction.
• The account must first add a HomePod, Google speaker, or Alexa speaker that supports the Matter protocol. Check the FAQ for a specific list.
• The Orvibo Dimmer Switch and the controller (normally the smart speakers of Alexa/Google/Apple) should be in the same LAN (local area network).
• The WiFi router should support or enable IPv6.
• If the indicator light flashes white slowly, you can add devices automatically. If the indicator light does not flash white, press the button 2 times quickly, then press the button again until the indicator flashes slowly.

Using Google Home App

Step 1: Open Camera App

Open the camera app on your Android device.

[Visual Description: Screenshot of an Android device's home screen showing various app icons, with the camera app highlighted.]

Step 2: Scan QR Code and Initiate Setup

Scan the Matter QR Code on the product or user manual and tap "Tap to set up".

[Visual Description: Screenshot of the Android camera app interface. A Matter QR code is displayed on a card, along with the text "matter 3610-9852-728" and company details. The "Tap to set up" button is visible.]

Step 3: Select Google Home App

Tap on Google Home in the App list.

[Visual Description: Screenshot showing an "Choose an app" screen with "Google Home" listed as an option.]

Step 4: Agree and Connect

Tap "I Agree" to add the product, then wait for the device to connect. Once added, tap "Done".

[Visual Description: A sequence of screens showing the connection process: "Connect this device to your Google Account", "Connecting to device...", and "Device connected". The "Agree" and "Done" buttons are highlighted.]

Step 5: Assign Location and Name

Choose a location for the device then tap "Next". Then give the device a name and tap "Next".

[Visual Description: Screenshots for assigning a location (e.g., "Orvibo", "Reading room") and creating a unique name for the device (e.g., "Orvibo Dimmer Switch").]

Using Alexa App

Step 1: Navigate to Add Device

Open the Alexa App, and tap on "Devices", then "+" and "Add Device".

[Visual Description: Screenshots showing the Alexa app interface, navigating through "Devices", tapping the "+" icon, and then selecting "Add Device".]

Step 2: Select Device and Scan QR Code

Tap "Connect your ORVIBO Light Bulb", then "Next" and "Yes", to "Scan QR Code".

[Visual Description: Screens within the Alexa app guiding the setup, including prompts like "Which device would you like to set up?", "Control your ORVIBO with Alexa", "Does your device have a Matter logo?", and "Locate a QR code shown for your device". The "Next" and "Yes" buttons are highlighted.]

Step 3: Scan Matter QR Code

Scan Matter QR Code on Orvibo Dimmer Switch or user manual.

[Visual Description: The Alexa app's QR code scanning interface is shown, with the Matter QR code positioned for scanning.]

Step 4: Connect to Wi-Fi

Select your network, tap "Next" and wait for it to connect and done.

[Visual Description: The "Connect device to Wi-Fi" screen is displayed, where a Wi-Fi network (e.g., "xin", "xin2", "ORVIBO") is selected. This is followed by a "Device found and connected" confirmation screen.]

Step 5: Assign to Group

Select your groups, tap "Add To Group" and done.

[Visual Description: A screen prompts the user to assign the device to a room or group (e.g., "Bedroom", "Dining room"). The "Add To Group" and "Continue" buttons are highlighted.]

Using Apple Home App

Step 1: Open Home App and Add Accessory

Open the Home app and tap "+", then select "Add Accessory".

[Visual Description: Screenshot of the Apple Home app interface, showing the "+" icon and the "Add Accessory" option.]

Step 2: Scan QR Code and Connect

Scan the Matter QR Code, then wait for the device to connect.

[Visual Description: Shows the "Add Accessory" screen with a QR code scanner, followed by "Connecting to Accessory" and details about the accessory.]

Step 3: Assign Location and Name

Choose a location then tap "Continue", and then enter a name, tap "Continue". It's done.

[Visual Description: A sequence of screens for selecting a "Light Location" (e.g., "Kitchen", "Entrance"), entering a "Light Name" (e.g., "Smart Dimmer Switch"), and a confirmation screen "Light Added to Happy Home".]

Orvibo Home App Note

3. Add Orvibo Dimmer Switch to Orvibo Home App (Adding other third-party Matter products to the App is not supported for the time being):

Please check the Orvibo Orvibo Dimmer Switch user manual.

(If the indicator light does not flash white, press the button 2 times quickly, then press the button again until the indicator flashes slowly.)