JONSBO CR-1000GT CPU Cooler User's Manual

For your real needs

Chapter 1 - Part List

The JONSBO CR-1000GT CPU Cooler package includes the following components:

A: CPU Cooler: The main heatsink and fan assembly.
B: Backplate - Intel: A mounting bracket for Intel motherboards.
C: Screw: Fasteners for securing the cooler.
D: Intel Bracket: Specific mounting brackets for Intel platforms.
E: AMD Bracket: Specific mounting brackets for AMD platforms.
F: Thermal Paste: Compound for heat transfer between the CPU and cooler.

(Diagrams illustrating each component are provided in the original document.)

Chapter 2 - Intel Installation Guide

Follow these steps to install the JONSBO CR-1000GT on Intel motherboards:

Step 1: Install Intel Bracket

Attach the Intel bracket (D) to the base of the CPU cooler. [Intel bracket installation]

(Diagram shows the Intel bracket being attached to the cooler base.)

Step 2: Prepare Motherboard and Backplate

Place the backplate (B) on the rear of the motherboard. Adjust the slider on the backplate to match your Intel socket type (LGA1700 or LGA115X/1200). [Backplate placement and slider adjustment for Intel sockets]

(Diagram shows the backplate on the rear of the motherboard, with an inset detailing slider adjustment for socket compatibility.)

Step 3: Mount Fan to Heatsink

Mount the fan onto the heatsink tower. [Fan mounting to heatsink]

(Diagram shows the fan being mounted onto the heatsink.)

Step 4: Apply Thermal Paste

Apply thermal paste (F) to the CPU or the cooler's base. Remove the protective film from the cooler's base before application. [Thermal paste application and film removal]

(Diagram illustrates thermal paste application and removal of a protective film.)

Step 5: Secure Cooler

Position the cooler assembly onto the CPU. Secure it to the motherboard using screws and a screwdriver. [Cooler fastening with screwdriver]

(Diagram shows the cooler assembly being screwed onto the motherboard.)

Step 6: Connect Power

Connect the CPU fan and RGB LED cables to the motherboard's CPU_FAN and RGB headers. [Fan and LED cable connection to motherboard]

(Diagram shows the fan and LED cables connected to motherboard headers.)

Chapter 3 - AMD Installation Guide

Follow these steps to install the JONSBO CR-1000GT on AMD motherboards:

Step 1: Remove Fan

Remove the fan from the heatsink before proceeding. [Fan removal from heatsink]

(Diagram shows the fan being detached from the heatsink.)

Step 2: Install AMD Bracket

Attach the AMD bracket (E) to the base of the CPU cooler. [AMD bracket installation]

(Diagram shows the AMD bracket being attached to the cooler base.)

Step 3: Prepare AMD Retention Module

Remove the plastic retainers from the AMD motherboard's stock retention module. [AMD retention module retainer removal]

(Diagram illustrates the removal of plastic retainers from the AMD mounting mechanism.)

Step 4: Adjust Brackets for Socket Compatibility

Adjust the screws on the AMD brackets to the position corresponding to your AMD socket type (e.g., AM4 or AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1). [AMD bracket screw adjustment for socket compatibility]

(Diagram shows screws on the AMD brackets being adjusted for different socket types.)

Step 5: Mount Fan to Heatsink