Introduction
MartinLogan's new line of ground-breaking Dynamo subwoofers offers advanced features, powerful performance, and exceptional value for music and home theater applications. These systems combine powerful amplifiers, audiophile-grade woofers, extensive input options, wireless connectivity, and Anthem Room Correction (ARC®) for a compelling audio experience.
Key Technologies and Features
Subwoofer Control App
The MartinLogan Subwoofer Control app, available for iOS and Android, connects via Bluetooth to simplify setup and configuration of Dynamo 600X, 800X, 1100X, and 1600X models. It provides app-based controls for volume level, low-pass filter (frequency and order), phase, 20-30Hz level, three preset listening modes, and a tone sweep feature.
Anthem Room Correction (ARC®)
Available for PC, iOS, and Android, Anthem Room Correction (ARC) measures low-frequency sound output in a room and compares it to optimal response curves that account for spatial anomalies. ARC effectively removes anomalies, leaving only the ideal standard—realistically blended, natural-sounding bass performance custom tailored to each unique listening room. Dynamo 600X, 800X, 1100X, and 1600X utilize a Bluetooth connection with a smartphone or a USB to PC connection to run ARC.
High-Excursion, Low-Turbulence, Inverted Surround Woofers
Dynamo subwoofers feature advanced-design woofers with inverted surrounds and powerful magnet, motor, and suspension designs. High-power magnet structures (significantly more robust than previous generations) pair with low-mass diaphragms to provide massive excursions while perfectly preserving the subtlest bass details.
Optional SWT-X Wireless Input
The Dynamo 600X, 800X, 1100X, and 1600X include a connection port for the optional SWT-X Wireless Subwoofer System (sold separately). This system incorporates the latest in wireless audio transmission technology, including 2.4GHz dynamic frequency selection, forward error correction, and a range up to 50 feet. Easy to install in the subwoofer, the SWT-X receiver requires no external power source or audio connections.
Built-in ETC (Energy Transfer Coupler) Spikes
The Dynamo 800X, 1100X, and 1600X models come with custom ETC spikes which can be used to enhance stability on thick carpets, or create tighter coupling between the subwoofer and floor to enhance overall sound quality. The built-in spikes are conveniently and discretely hidden underneath the rubber feet.
Unique Front-Firing or Down-Firing Design
When placed inside of a cabinet or other discreet location, Dynamo 800X, 1100X, and 1600X subwoofers can easily convert from standard down-firing to front-firing orientation. A grille is provided for use in front-firing applications.
Comprehensive Connections
Designed for exceptional performance in music and home theater applications, Dynamo subwoofer systems offer an extremely comprehensive array of connections. All five new Dynamo subwoofers feature left and right input via RCA line level and speaker level connections. The Dynamo 400 and 600X's right input doubles as an LFE input for home theater applications. The Dynamo 800X adds a discrete LFE RCA line level input. The Dynamo 1100X and 1600X go one step further by adding both XLR and RCA inputs for LFE connection. Models 800X, 1100X, and 1600X feature 12V Trigger Inputs, allowing an external device to turn the subwoofer on/off. These models allow simultaneous connection of both 2-channel stereo music and multi-channel home theater sources, and allows each source to have individual crossover and level settings. LFE inputs use no low-pass filter, leaving crossover control to the processor. Left and right inputs integrate discrete user-adjustable low-pass filters allowing different level and crossover points when playing back two channel music.
Dynamo Series Subwoofer Specifications
| Model | System Frequency Response | Low Frequency Transducer | Amplifier | Software | Controls (Backplate/Bluetooth) | Inputs (Audio/Wireless/Other) | Input Impedance | Room Correction | Power Draw | Feet | Weight | Dimensions (HxWxD), Front-Firing | Dimensions (HxWxD), Down-Firing | Finish |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dynamo 400 | 30–200 Hz ±3 dB. Anechoic in LFE mode. | 8" (20.3cm) high-excursion, inverted surround, polypropylene cone in a stamped steel basket with extended throw driver assembly. Ported. | 75 Watts (150 peak) | N/A | Level: Min–Max Low-Pass Filter: 35–120Hz, Bypass Phase: 0°, 180° Power Mode: On, Auto | Line Level: Left, Right/LFE Speaker Level: Left and Right via banana jacks N/A (Wireless) N/A (Other) | RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) | N/A | Typical: 20W, Max: 90W, Idle: 4W, Standby: 0.5W | Rubber | 28.5 lbs. each (12.9 kg) | N/A | 15.2 x 13.3 x 13.7 inches (38.5 x 33.7 x 34.8 cm) | Satin Black |
| Dynamo 600X | 27–200 Hz ±3 dB. Anechoic in LFE mode. | 10" (25.4cm) high-excursion, inverted surround, polypropylene cone in a stamped steel basket with extended throw driver assembly. Ported. | 120 Watts (240 peak) | Sub Control App: iOS and Android Anthem Room Correction: iOS, Android, and PC | Level: Min–Max Setting Control: Local, App Power Mode: On, Auto Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency) | Line Level: Left, Right/LFE Speaker Level: Left and Right via banana jacks SWT-X Receiver & Transmitter (sold separately) USB: Micro USB (for ARC/Firmware Update) | RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) | Anthem Room Correction (ARC) | Typical: 30W, Max: 150W, Idle: 4W, Standby: 0.5W | Rubber | 35.5 lbs. each (16.1 kg) | N/A | 16.3 x 14.5 x 14.9 inches (41.5 x 36.7 x 37.8 cm) | Satin Black |
| Dynamo 800X | 24–200 Hz ±3 dB. Anechoic in LFE mode. | 10" (25.4cm) high-excursion, inverted surround, polypropylene cone in a stamped steel basket with extended throw driver assembly; sealed non-resonant cabinet design. | 300 Watts (600 peak) | Sub Control App: iOS and Android Anthem Room Correction: iOS, Android, and PC | Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency) | Line Level: Left, Right, and LFE Speaker Level: Left and Right via banana jacks SWT-X Receiver & Transmitter (sold separately) USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC | RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) | Anthem Room Correction (ARC) | Typical: 70W, Max: 360W, Idle: 10W, Standby: 0.5W | Rubber, ETC (Energy Transfer Coupler) Spikes | 30 lbs. each (13.6 kg) | 14.6 x 12.4 x 12.7 inches (37.1 x 31.5 x 32.4 cm) | 13.7 x 12.4 x 13.1 inches (34.8 x 31.5 x 33.3 cm) | Satin Black |
| Dynamo 1100X | 22–200 Hz ±3 dB. Anechoic in LFE mode. | 12" (30.5cm) high-excursion, inverted surround, polypropylene cone in a cast aluminum basket with extended throw driver assembly; sealed non-resonant cabinet design. | 650 Watts (1,300 peak) | Sub Control App: iOS and Android Anthem Room Correction: iOS, Android, and PC | Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency) | Line Level: Left, Right, and LFE Speaker Level: Left and Right via banana jacks XLR: LFE SWT-X Receiver & Transmitter (sold separately) USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC | RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) XLR: 28,000 Ohms (pin 2 to 3) | Anthem Room Correction (ARC) | Typical: 100W, Max: 600W, Idle: 15W, Standby: 0.5W | Rubber, ETC (Energy Transfer Coupler) Spikes | 46 lbs. each (20.9 kg) | 17.2 x 15 x 16.2 inches (43.6 x 38 x 41.1 cm) | 17.1 x 15 x 15.6 inches (43.5 x 38 x 39.6 cm) | Satin Black |
| Dynamo 1600X | 20–200 Hz ±3 dB. Anechoic in LFE mode. | 15" (38.1cm) high-excursion, inverted surround, polypropylene cone in a cast aluminum basket with extended throw driver assembly; sealed non-resonant cabinet design. | 900 Watts (1,800 peak) | Sub Control App: iOS and Android Anthem Room Correction: iOS, Android, and PC | Level: Min–Max Setting Control: Local, App Power Mode: On, Trigger, Auto Level: -40 to 12dB Low-Pass Filter (Frequency): 35–120Hz Low-Pass Filter (Order): Bypass, Third, Fourth Phase: 0–180° (1° Increments) Phase (Polarity): Normal, Inverted Preset Listening Modes: Music, Night, Movie 20–30Hz Level: ±10dB Anthem Room Correction (ARC): On, Off Tone Sweep (20–120Hz): On, Off, Pause (Frequency) | Line Level: Left, Right, and LFE Speaker Level: Left and Right via banana jacks XLR: LFE SWT-X Receiver & Transmitter (sold separately) USB: Micro USB (for ARC/Firmware Update) Trigger: 3.5mm, 5–24 DC | RCA: 8,300 Ohms Speaker Level: 2,000 Ohms (red to black) XLR: 28,000 Ohms (pin 2 to 3) | Anthem Room Correction (ARC) | Typical: 125W, Max: 800W, Idle: 15W, Standby: 0.5W | Rubber, ETC (Energy Transfer Coupler) Spikes | 57 lbs. each (25.9 kg) | 20.1 x 17.9 x 19.1 inches (51 x 45.4 x 48.6 cm) | 20 x 17.9 x 18.5 inches (50.9 x 45.4 x 47 cm) | Satin Black |
