Ninja Kitchen System Pulse™ Owner's Guide

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. To protect against electrical shock, do not submerge the appliance or allow the power cord to come into contact with water or any other liquid.
2. DO NOT allow young children to operate the appliance or use as a toy. Close supervision is necessary when any appliance is used by or near children.
3. Never leave an appliance unattended when in use.
4. Remove the power cord from the electrical outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the electrical outlet. Never pull from the power cord.
5. DO NOT abuse the power cord. Never carry the appliance by the power cord or yank it to disconnect from electrical outlet; instead grasp the plug and pull to disconnect.
6. DO NOT operate any appliance with a damaged cord or plug, or after the appliance malfunctions, has been dropped or damaged in any manner. Return the appliance to EURO-PRO Operating LLC for examination, repair or adjustment.
7. DO NOT let the power cord hang over the edge of table or counter or touch hot surfaces such as the stove.
8. Always use appliance on a dry, level surface.
9. Keep hands, hair, clothing, as well as utensils out of container while processing to reduce the risk of severe injury to persons or damage to the appliance. A scraper may be used but only when the appliance is not running.
10. CAUTION: Blade assembly is sharp, handle with care. When handling the blade assembly, always hold by the shaft or collar.
11. Avoid contact with moving parts.
12. DO NOT attempt to sharpen blades.
13. DO NOT use the appliance if blade assembly is bent or damaged.
14. To reduce risk of injury, never place the blade assembly on the base without the pitcher or bowl properly attached.
15. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a heated oven).
16. The use of attachments or accessories including canning jars, not recommended by the manufacturer may result in fire, electric shock or personal injury.
17. DO NOT remove the container from the motor base while the appliance is in operation.
18. To reduce the risk of injury, NEVER operate the appliance without the lid in place; DO NOT try to defeat the interlock mechanism; make sure that the attachment is properly installed before operating the appliance.
19. DO NOT expose containers to extreme temperature changes.
20. DO NOT blend hot liquids.
21. DO NOT overfill.
22. DO NOT operate the appliance empty.
23. CAUTION: When mixing pizza dough or any heavy mix such as bread dough or pastry dough, mix for up to 1 minute, then let the appliance rest for approximately 1 minute before mixing again to prevent overheating of the appliance.
24. If the appliance overheats, a thermal switch will become activated and shut off the motor. To reset, unplug the appliance and let it cool down for approximately 30 minutes before using again.
25. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use this appliance for anything other than its intended use. Do not use outdoors.
26. The maximum rating is based on the Cookie Paddle (1 L bowl) that drives the greatest power and other recommended attachments may draw less power or current.
27. Keep the pour spout closed when blending to prevent splashing.

▲WARNING: Extension cords are not recommended for use with this product.

POLARIZED PLUG

WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO NOT modify the plug in any way.

SAVE THESE INSTRUCTIONS

Getting To Know Your Ninja® Kitchen System Pulse™

The Ninja® Kitchen System Pulse™ is a high powered innovative tool with a compact design and outstanding performance. It is perfect for ice crushing, chopping, blending, kneading and complete juicing. The Ninja® Kitchen System Pulse™ also features a unique capability to knead dough for cookies, breads, pizza and more! Blend and go with the convenient Nutri Ninja™ cup, create delicious drinks to get you out the door! Best results are achieved when you Pulse.

Components:

• 1 L Bowl Storage Lid
• 1 L Bowl Lid with Locking Handle
• Nutri Ninja™ To-Go Lids (x2)
• Cookie Paddle (1 L bowl)
• Dough Blade (1 L bowl)
• Total Crushing™ Blade Assembly (1 L bowl)
• Nutri Ninja™ Cup (x2)
• 1 L Bowl
• Drive Gear
• Nutri Ninja™ Blade
• Motor Base
• Power Cord (not shown)

NOTE: Attachments are not interchangeable.

FEATURES:

• Total Crushing™ Technology
• 1 L Bowl and Nutri Ninja™ Cup - BPA Free
• Cord storage
• Pulse Power: Controlled blending, processing, juicing, and kneading by using short pulses. In short intervals, press down on the top of the Nutri Ninja™ cup or the handle of the 1 L bowl lid and pulse to the perfect consistency.
• Nutri Ninja™: Fill, blend, and go! Blend right in the Nutri Ninja™ cup and twist on the to-go lid for a healthy, convenient snack with little clean up.
• Dough Mixing: Mix and knead pizza dough, cookie dough, bread dough and more!

For best results, be sure to carefully read all the instructions contained in the manual before using this appliance.

Assembling the Ninja® Kitchen System Pulse™

BEFORE FIRST USE

1. Remove all packaging material and labels from the appliance.
2. Wash the lids, bowl, Nutri Ninja™ cups and attachments in warm, soapy water with a soft cloth. Use caution when washing the blade assemblies as the blades are very sharp.
3. Rinse and dry thoroughly.
4. The bowl, Nutri Ninja™ cups, lids and attachments are all dishwasher safe. It is recommended that the lids and attachments be placed on the top rack. Ensure that the attachments are removed from the containers before placing in the dishwasher.
5. Wipe the motor base clean with a damp cloth.

Assembly and Use for the Nutri Ninja™ Cup

▲ IMPORTANT: Make sure that the motor base is plugged in for use.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Add ingredients to the Nutri Ninja™ cup.
3. Place the Nutri Ninja™ blade onto the cup and screw it tightly until you have a good seal. (Refer to diagram showing cup inverted with blade attached).
4. Turn the Nutri Ninja™ cup upside down and place it onto the motor base, aligning the tabs on the cup with the motor base. Turn to the left, the unit is ready for use. (Refer to diagram showing cup locked onto motor base).
5. Press down on the top of the cup in short intervals to activate. (Refer to diagram showing hand pressing down on cup).
6. When you have reached your desired consistency, stop the appliance by removing your hand from the Nutri Ninja™ cup. Then turn the Nutri Ninja™ cup to the right (Refer to diagram showing cup turning right) and pull straight up to remove. (Refer to diagram showing cup being lifted).
7. NOTE: Do not overfill! To avoid spilling, do not add ingredients past the “Max” fill line.
8. Turn the cup upright and remove the Nutri Ninja™ blade by twisting the blade assembly to the left.
9. Place the To-Go drinking lid onto the Nutri Ninja™ cup, twist to seal and enjoy!
10. Make sure that the motor base is unplugged when not in use.

Assembly and Use for the 1 L Bowl

It's best to add the liquid ingredients first and then the dry ingredients.

▲ IMPORTANT: Make sure that the motor base is plugged in for use.

1. Place the motor base on a clean, dry, level surface such as a counter or table top.
2. Align and lower the bowl onto the motor base. Handle should be aligned slightly to the left of the “LOCK” symbol on the motor base. (Refer to diagram showing bowl being placed on base).
3. Rotate the container to the left as far as it will go to lock in place. (Refer to diagram showing bowl locked on base).
4. Holding the desired attachment by the shaft, place it onto the drive gear inside the container. Ensure that the attachment is seated properly and is standing upright. (Refer to diagram showing blade assembly being inserted).
   NOTE: The blade will fit loosely on the drive gear.
5. Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.
6. Holding the lid by the handle in the upright position, place it on top of the bowl aligning the arrow (✔) located on the lid with the arrow (▲) located on the bowl's handle. (Refer to diagram showing lid being placed on bowl).
7. Push down on the "PULSE" on the handle to start the appliance. (Refer to diagram showing hand pressing lid handle).
   NOTE: Pulse ingredients for even chopping by pressing down in short intervals.

8. ▲ IMPORTANT: When using the dough blade or cookie paddle hold the appliance to secure the appliance to the counter or table top.

9. When you have reached your desired consistency, stop pressing the lid handle and wait for the attachment to stop turning.
10. To remove the lid, pull the lid handle up to a 90° angle. Turn the bowl clockwise to lift off the base. (Refer to diagrams showing lid removal and bowl removal).

11. ▲ CAUTION: Never insert your hands in the pitcher as the blades are sharp. Always use a spatula to dislodge food that has stuck to the sides of the pitcher.

12. Make sure that the unit is unplugged when not in use.

Suggested Uses

▲ *IMPORTANT: When mixing pizza dough or any heavy mix such as bread dough or pastry dough, mix for up to 1 minute, then let the appliance rest for approximately 1 minute before mixing again to prevent overheating of the appliance.

Care & Maintenance

HOW TO CLEAN

▲ CAUTION: Make sure that the motor base is unplugged from the power source before inserting or removing any attachment and before cleaning.

▲ CAUTION: DO NOT immerse the motor base into water or any other liquid.

1. Separate/remove all parts from each other.
2. Clean the motor base and gear shaft with a damp cloth and wipe dry.
3. Place the bowl and Nutri Ninja™ cups in the dishwasher. Place the lids and attachments on the top rack. Use caution when handling the blade assemblies as the blades are very sharp.
4. NOTE: You may also wash the containers by filling the container with no more than 0.75 L of warm water and a drop of dish washing detergent, placing the corresponding lid on the container and pulsing a few times. Do not fill the container with more than 0.75 L of water because it will overflow. Once clean, remove the container from the motor base. Rinse the container, attachment and lid under running water. Allow all the parts to dry before storing.

Please call customer service if any servicing needs to be performed on the appliance at 1-877-646-5288.

HOW TO STORE

1. Store the Ninja® Kitchen System Pulse™ upright with the 1 L bowl on the motor base, Total Crushing™ Blade assembly inside and lid on the bowl. Secure the power cord underneath the base by wrapping the cord around the cord wrap. Do not place anything on top. Store the Nutri Ninja™ cups and the rest of the attachments along side the appliance where they will not be damaged and won't cause a hazard.

RESETTING THE MOTOR THERMOSTAT

The Ninja® Kitchen System Pulse™ features a unique safety system which prevents damage to the unit's motor and drive system should you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. To reset the appliance, follow the resetting procedure below:

1. Unplug the appliance from the electrical outlet.
2. Remove and empty the container and ensure that no food is jamming the cutting blades or attachments.
3. Allow the appliance to cool for approximately 30 minutes.
4. Re-install the container onto the base and re-plug the appliance into the electrical outlet.
5. Proceed to use the appliance as before making sure not to exceed the recommended maximum capacities.

Troubleshooting Guide

Replacement Parts

ORDERING REPLACEMENT PARTS

To order additional parts and attachments, please visit the Ninja Kitchen website: www.ninjakitchen.com or feel free to contact customer service: 1-877-646-5288.

ONE (1) YEAR LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1) year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and exceptions.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at its option. This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.

If the appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period, the complete appliance and accessories with proof of purchase and date, freight prepaid, may be returned. For Customer Service support, call 1-877-646-5288 or visit the Ninja Kitchen website: www.ninjakitchen.com.

If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO Operating LLC's sole discretion, it will be repaired or replaced free of charge. Proof of purchase date and a check made payable to EURO-PRO Operating LLC in the amount of $19.95 to cover the cost of return shipping and handling must be included.*

This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This Limited Warranty gives specific legal rights, and other rights which vary from state to state or from province to province may also apply.

*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with the item. It is recommended to insure the package (as damage in shipping is not covered by the Limited Warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. EURO-PRO Operating LLC is constantly striving to improve its products, therefore the specifications contained herein are subject to change without notice.

Product Registration

Please visit www.ninjakitchen.com or call 1-877-646-5288 to register the new Ninja® product within ten (10) days of purchase. Users will be asked to provide the store name, date of purchase and model number along with their name and address.

Registration will enable EURO-PRO Operating LLC to contact users in the unlikely event of a product safety notification. By registering, users acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.