New Bee Air Conduction Headphone H1

I. Product Overview

This is an air conduction headphone that provides an extra comfortable and safe wearing experience. It gives totally clear calls and superior sound quality even in noisy environment. In addition, this headphone has a stylish appearance and long battery life, which is a great choice for sports, hiking and driving.

II. Product Description

Diagram: Two earbud units are shown, one for the left ear (labeled 'L') and one for the right ear (labeled 'R'), each with an ear hook. The right unit has a circular touch-sensitive area on its outer surface.

Diagram: A detailed view of a single earbud unit and its ear hook. Key components are labeled:
1. Speaker
2. Headphone Charging Contact Point
3. Headphone Indicator (LED light)
4. Microphone
5. Multifunctional Key (Touch Control Area)
6. Ear Hook Cable

III. Packing List

• User manual ×1
• Headphone ×1
• Charging cable ×1

IV. Wearing Instruction

Hang the ear hook on the left ear and right ear separately. Make sure the sound outlet is aligned with the ear canal to achieve the optimal sound quality.

Diagram: Shows the headphones correctly positioned on the left (L) and right (R) ears, illustrating the placement of the ear hook and speaker unit.

V. Usage and Operation

1. Pairing

Diagram: A smartphone screen displays Bluetooth settings, with Bluetooth enabled and the 'H1' headphone listed as connected.

1. Press and hold the multifunctional key for 3 seconds to turn on the headphone. The headphone will emit the voice prompt "power on". Later, it will emit the voice prompt "pairing", indicating it is in pairing state.
2. Open the Bluetooth function on your cellphone to search for Bluetooth devices. Find "H1" in the list and click to connect. When hearing the voice prompt "connected", the connection is successful and the headphone indicator light turns off.
3. When using the headphone again, it automatically connects to the last paired device. If no paired device is found within 5 minutes, the headphone will automatically turn off.
4. If pairing fails, delete all pairing records of "H1" from your device. Turn off the Bluetooth function on your cellphone, then turn it back on and search again.

2. Two Devices Connection

This headphone can connect to two smartphones simultaneously.

Operation Steps: After successfully connecting to Phone A, turn off the Bluetooth function of Phone A and the headphone. Next, restart the headphone and connect to Phone B. Then, turn on the Bluetooth function of Phone A, find "H1" in the list of Bluetooth devices, and click to connect. (NOTE: Although the headphone can connect to two phones at the same time, only one phone can play music through H1 at any given moment.)

3. Touch Function Description

NOTE: Only the right side headphone has touch control function.

4. Headphone Indicator / Voice Prompt

5. Restore Factory Settings

If the headphone is abnormal in use, please restore it to factory settings.

Operation: Click the multifunctional key eight times consecutively. When hearing the voice prompt "pairing", it means the headphone has been restored to factory settings.

6. Charge the Headphone

The headphone emits the voice prompt "low battery" and the headphone indicator keeps flashing slowly in red, indicating a low battery state. Please charge the headphone immediately.

Connect the charging cable's pogopin to the headphone's charging contact point to charge. When charging, the headphone indicator is red. When fully charged, the headphone indicator turns blue.

NOTE: When charging, please keep the headphone charging contact point dry and free of foreign bodies.

Diagram: Shows the headphone unit with its charging contact points aligned with a charging cable connector. An arrow indicates the connection.

VII. Product Specifications

• Product model: H1
• Version: V5.3
• Supported protocol: HFP/HSP/A2DP/AVRCP
• Speaker specification: Φ16.2mm
• Transmission range: 10m
• Battery capacity: 100mAh
• Charging time: 1.5 hours
• Charging method: magnetic pogopin
• Playback time: about 6 hours
• Standby time: about 6 months
• Working temperature: -5℃ ~ 50℃
• Waterproof level: IPX5

VIII. Common Problems

1. The headphone cannot be turned on.

• Please try to charge it first, then try to turn on the headphone when the battery is sufficient. Check whether the headphone indicator is red when charging.
• Make sure the position of the touch control is correct.

2. The connection is abnormal.

• Please restore the headphone to factory settings and reconnect it. (Click the multifunctional key eight times consecutively. When hearing the voice prompt "pairing", the headphone has been disconnected.)

3. The headphone cannot be charged.

• Please try to replace another 5V output power adapter to charge.
• Make sure the headphone charging contact point is dry and no foreign body.

Happy? ?

Thank you for choosing our products! We sincerely hope it will be your new-found happiness.

If you are fully satisfied with your using experience, could you please kindly share it with your friends?

We also engage with our fans to learn how we can do better by offering free pre-release products. If you are interested, do not hesitate to follow us on:

f Facebook: NewBeeBrand
? Website: https://www.anewbee.com

Not Happy? ?

If you have any questions, concerns, or are just not satisfied with our products, please feel free to contact us through e-mail at:

✉️ E-mail: support@anewbee.com
☎️ Tel: (USA) 1-626-701-7623 | (UK) 07845854035
? Address: 3rd Fl, Bldg E, Guanghao Ind., No. 23, Yunfeng Rd, Dalang St., Longhua Dist., Shenzhen City, Guangdong Prov., China

Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.