GLOBAL
globalindustrial.com | globalindustrial.ca
Instruction Manual
Customer Service: US: 1-800-645-2986 | Canada: 888-645-2986
Non-Contact Digital Infrared Forehead Thermometer
Model 695746
⚠️ WARNING
- Read entire manual before operation. For additional questions or concerns, contact Global Industrial Customer Service at 1-800-645-2986 or visit www.globalindustrial.com.
- Product to be used in ambient temperatures between 60°-95°F (16°-35°C).
- DO NOT use this product in an environment with a relative humidity greater than 93%.
- DO NOT place this product too close to the electromagnetic range, (examples: radio, mobile phone, etc.).
- DO NOT expose to excessive heat or water.
- DO NOT use if product is damaged.
- Sweat, hair, hats, or other foreign matter on the forehead can affect the accuracy of the measurement.
- Ensure the measurement distance is within 1 to 2 inches.
- Contact Global Industrial if there are any problems with the thermometer, DO NOT attempt to do any repairs yourself.
- Keep this manual for future use.
Specifications
| Temperature Range: | 91.4°-109.4°F (33°-43°C) |
| Power Supply: | DC 3V - 2 AAA batteries (not included) |
| Measuring Distance Range: | 1-1/6 - 2 in. |
| Response Time: | 1 Second |
| Memory Data: | 20 Records |
| High-Fever Warning: | 5 Beeps |
| Display: | Blue LCD |
| Low Battery Alarm: | Yes |
| Product Weight: | 1/4 lb. (excluding batteries) |
| Product Dimensions: | 6.1"L x 3.5"W x 1.7"H |
| Certification: | FDA |
| Ambient Temp. Working Range: | 60°-95°F (16°-35°C) |
Component Identification
- [1] LCD Display
- [2] Function Button
- [3] [+] Button
- [4] [-] Button
- [5] Infrared Sensor
- [6] Measurement Trigger
- [7] Handle
- [8] Battery Cover
Operation Instructions
- Insert batteries - Open the battery cover and insert (2) AAA batteries (not included) into the bottom of the thermometer. Close the battery cover.
- The thermometer will beep.
- Tap the [Function Button] to switch between “body” and “surface” temperature modes.
- Press the [Measurement Trigger] to measure forehead temperature. In order to get an accurate measurement, ensure the thermometer is 1 to 2 inches away from the forehead.
- Press [+] or [-] buttons to review the last 20 measurement results.
- Press and hold the [Function Button] for 3 seconds to access the different function modes below. Tap the [Function Button] again to scroll through the following modes:
- [F1]: °F or °C unit mode - Press [+] or [-] button to select.
- [F2]: Max. temperature alarm mode; press [+] or [-] button to select.
- [F3]: Display data offsetting mode; press [+] or [-] button to select.
- [F4]: Buzzer sound activate/deactivate mode; press [+] or [-] button to select.
- The thermometer will automatically shut-off when idle and will turn back on by pressing any button.
Product Maintenance
- Do not use abrasive cleaners to clean this product.
- Do not submerge the product into water or other liquids.
- Keep the product in a dry place to avoid dust, pollution and direct sunlight.
- Clean regularly using a dry soft cloth. If needed, use a damp cloth with water or a neutral detergent to clean, then wipe dry with a clean cloth.
