4-Tier 12 Door Clear View Charging Locker, Digital Lock, Assembled
Model No. 413249
Charging cables: type-c, lightning, and micro. Compatible with type b outlet. Maximum output of the charging ports: 20W for each port. There are two keys included: the master locker key and the digital lock's master key.
Contents
| REF. | QTY. | DESCRIPTION |
|---|---|---|
| A | 1 | Main locker unit |
| B | 1 | Top mounting bracket |
| C | 1 | Bottom mounting bracket |
| D | 2 | Mounting rails/brackets |
| H1 | 8 | Mounting screws |
| H2 | 8 | Mounting screws |
| H3 | 8 | Mounting screws |
| H4 | 2 | Mounting screws |
| H5 | 1 | Master locker key / Digital lock master key |
Assembly Instructions
Please install the wires and turn on the power switch before mounting the device on the wall.
Diagram showing the main locker unit (A) with mounting brackets (B, C) attached to the sides, secured by multiple screws (H1 x8).
Diagram showing two mounting rails/brackets (D) being attached to the sides of the locker unit using screws (H2 x8 and H3 x8). Dimensions indicated are approximately 618.6 units.
Diagram showing the bottom of the locker unit being secured with two screws (H4 x2).
Operation Instruction
Illustration of the digital lock interface. It features a keypad with numbers 1 through 4, a '*' symbol, and a dial/knob for operation. Two variations of the lock are shown.
Visual & Audio Indication
| Indication | Light | Beeper | Note |
|---|---|---|---|
| Correct Operation | Green Light Flash 2 times | / | If the interval is longer than 4 seconds, the setting process will be exited. |
| Error Operation | Red Light Flash 3 times | / | |
| Low Voltage Alarm | Red light flash 3 times with the beeps | V | After the first low voltage alarm, the lock can still be used more than 50 times. |
Mode Operation
Before programming, select the most appropriate function for the application: (A) Private Mode or (B) Public Mode.
Private Mode
Setup: *--Master code--*--32--* (Succeed: Green light flash 2 times)
Result: The lock will revert back to default Private Mode. Default user code will be 1111 in Private Mode, and it can be reused to lock and unlock until reprogrammed.
Public Mode
Setup: *--Master code--*--31--* (Succeed: Green light flash 2 times)
Result: The lock will now remain open until the next user enters their own code into the lock. Step 1: Enter new user code -- Close the locker, which will now be locked. Step 2: Enter user code -- The lock will now remain open until the next 4-digit code is entered.
Note: Default Settings
- Public Mode is the default setting.
- Master code: 12344321 (8 digit code)
- Sub-Master code: (8 digit code, there is no Sub Master code set)
- No user code: Locks are in unlocking status (user code is 4 digit code).
Private Mode Details
1. Master Code Function
| Function | Operation | Note |
|---|---|---|
| Open | Enter master code | Re-locks automatically after 4 seconds |
| Set the master code | * --master code--*--11--*--new master code--* * --new master code-- * | Master code: (8 digit code) |
| Set or change user code | * --master code--*--12--*--new user code--* | User code: (4 digit code) User code reset as 1111 |
| Delete user code | * --master code--*--13--* | |
| Set or change sub-master code | * --master code--*--14--* --new sub-master code--* | Sub-Master code: (8 digit code) |
| Delete sub-master code | * --master code--*--21--* | |
| Set public mode | * --master code--*--31--* |
2. Sub-Master Code Function
| Function | Operation | Note |
|---|---|---|
| Open | Enter sub-master code | Re-locks automatically after 4 seconds |
| Set or change user code | *--current sub-master code--*--41-- * --new sub-master code-- * | |
| Set or change sub-master code | *--sub-master code-- *--42--*--new sub-master code--* |
3. User Code Function
| Function | Operation | Note |
|---|---|---|
| Open | Enter user code | Re-locks automatically after 4 seconds |
| Set or change user code | * --current user code-- *--new user code-- * |
Public Mode Details
1. Master Code Function
| Function | Operation | Note |
|---|---|---|
| Open | Enter master code | Open the lock and delete user code |
| Set the master code | *--current master code-- * --11-- * --new master code-* *--new master code-- * | |
| Set or change sub-master code | *--master code-- *--14--* --new sub-master code--* | |
| Delete sub-master code | *--master code--* --21--* | |
| Set private mode | *--master code-- *--32--* | |
| Delete user code | Enter the master code to unlock and delete the user code | Open the lock and delete user code |
2. Sub-Master Code Function
| Function | Operation | Note |
|---|---|---|
| Open | Enter sub-master code | Open the lock and delete user code |
| Set or change sub-master code | *--master code-- *--42-- *--new sub-master code--* |
3. User Code Function
| Function | Operation | Note |
|---|---|---|
| Open | Enter user code | Open the lock and delete user code (Remark: the user code is only valid once in Public Mode) |
| Set user code | New user code | After entering the code, it locks automatically |
Additional Functions
- Password protection: Entering incorrect codes 5 times will cause the lock to shutdown for 20 seconds.
- Emergency unlocking: 1) Use a magnetic tool to remove the protective cover and insert the key to unlock the lock. 2) Emergency key unlocking still retains the setting state before unlocking.
- Initialize Function: Set the code --master code--. The lock will go back to default settings.
Illustration of the digital lock interface, highlighting the magnetic tool being used to remove a protective cover to access the emergency key slot.
