STRONG LEAP-S3+ / LEAP-S3+V2 4K UHD Streaming TV

Introduction

Thank you for choosing the STRONG 4K Ultra HD Google TV Box. This device is designed with the latest technologies to offer complete entertainment and great versatility. Explore the Android universe and enjoy countless hours of new experiences.

1.1 Safety Instructions

Read all instructions before operating the device. Keep these instructions for future reference. Use only attachments and accessories specified or supplied by the manufacturer (e.g., power adapter, batteries).

• Refer to the electrical and safety information on the device before installation or operation.
• To reduce the risk of fire or electric shock, do not expose this device to rain or moisture.
• Do not obstruct ventilation openings with objects like newspapers, tablecloths, curtains, etc.
• Do not expose the device to splashing and do not place objects filled with liquids, such as vases, on the device.
• The symbol ⚡ indicates a risk of electric shock.
• To prevent injury, this device must be securely fixed to the floor/wall according to the installation instructions.
• There may be a danger of explosion if batteries are replaced incorrectly. Replace batteries only with the same type or equivalent.
• Do not expose batteries to excessive heat such as sunlight, fire, or other heat sources.
• Excessively high sound pressure from earphones or headphones can cause hearing loss.
• Listening to music at high volume levels for extended periods can damage hearing. To reduce the risk of hearing damage, lower the volume to a safe comfortable level and limit listening time at high levels.
• The mains socket or a coupler is used as the disconnect device; it must remain readily accessible. When not in use and if moved, take care of the entire power cord, for example, by securing it with a plastic tie. It should be free of sharp edges and anything that could cause abrasion. The absence of an indicator light on the device does not mean it is completely disconnected from the mains. To disconnect the device completely, the mains plug must be unplugged. When all indicator lights or similar are off, the device is completely disconnected from the mains. Pay special attention to environmental aspects for battery recycling.
• No open flame sources, such as lit candles, should be placed on the device.
• To prevent fire, always keep candles or other open flames away from this product at all times.
• Equipment with this symbol is a Class II appliance or has double electrical insulation. It is designed so that its electrical safety grounding is not required.

Precautions

• Never attempt to open the device. Touching internal parts can cause electric shock due to high voltages. Opening the device voids the warranty. Refer to qualified personnel for any maintenance or service.
• When connecting cables, ensure the device is unplugged from the mains. After turning off the device, wait a few seconds before moving it or disconnecting any equipment.
• It is imperative to use only an approved extension cord and compatible wiring that matches the power consumption of the installed equipment. Ensure the power supply corresponds to the voltage indicated on the electrical identification plate on the back of the device.
• Risk of explosion if the battery is replaced with an incorrect model. Disposing of a battery in a fire or hot oven, crushing or cutting a battery can cause an explosion. Leaving a battery in a very high temperature environment can cause an explosion or leakage of flammable liquid or gas. A battery exposed to very low atmospheric pressure may cause an explosion or leakage of flammable liquid or gas.

Operational Environment

• Do not install this equipment in a confined space like a bookcase or similar unit.
• Do not use the device near humid and cold areas; protect it from overheating.
• Keep away from direct sunlight.
• Use in a clean, dry, and dust-free environment.
• Do not place candles near ventilation openings to prevent foreign flammable materials from entering the device.

WEEE Directives

This symbol represents the standard for recycling Waste Electrical and Electronic Equipment, indicating that this product should not be treated as household waste within the European Union. To prevent environmental or human health damage from uncontrolled waste disposal, please recycle this equipment responsibly to promote sustainable resource reuse. Please use your official collection and return system or contact your retailer. They can ensure proper recycling according to WEEE standards.

1.2 Storage

Your device has been carefully checked and packaged before shipment. Upon unpacking, ensure all parts are included and keep the packaging out of reach of children. We recommend keeping the carton during the warranty period to keep your device perfectly protected in case of warranty repair.

Installation of the device

Please follow the instructions below:

This user manual provides complete instructions for the installation and use of this product. The symbols used are as follows:

• ATTENTION: Indicates a warning.
• CONSEILS: Indicates important or useful information.
• MENU Represents a button on the remote control or the product.
• Aller à Refers to a section of the displayed menu.

1.3 Content

• 1x Google TV Box
• 1x Remote control with voice command
• 1x 12V / 1A USB Power Adapter
• 2x AAA Batteries
• 1x Installation Instructions
• 1x HDMI Cable version 2.1

ATTENTION: Batteries must not be recharged, disassembled, short-circuited, mixed with other types of batteries, or used with rechargeable batteries (e.g., NiMH). We recommend using low self-discharge types for long-lasting remote control performance.

2. TV BOX PANELS

2.1 Front Panel

STRONG

Power/Standby Indicator: Green: On / Red: Standby

2.2 Side Panel

USB Port

Reset

2.3 Rear Panel

SPDIF (Optical)

HDMI

LAN/ETHERNET RJ45

12V DC IN

Connection to a digital audio amplifier.

To connect your receiver to your TV or Dolby Digital amplifier using an HDMI cable.

Connection to your Internet network to access the Internet and applications.

Connection of the supplied 12V / 1A power adapter.

2.4 Remote Control Usage

1. Power Button: Turns the TV box on or off (standby).
2. Source Button: Changes the image source.
3. 0 to 9: Directly select a channel.
4. Subtitle/Audio Button: Selects subtitles/audio.
5. INFO: Displays information about the current source.
6. COLORED BUTTONS: Press these buttons to execute corresponding functions displayed on the screen.
7. Account Menu Button: Opens the "account" menu for selection.
8. Voice Control Button: Press to activate voice control function.
9. Settings Button: Direct access to the settings menu.
10. Navigation Buttons (Up/Down/Left/Right) & OK Button: Navigate the menu and confirm selection.
11. Back Button: Returns to the previous channel or previous menu.
12. Home Button: Accesses the Home desktop.
13. Settings Button: Accesses TV settings.
14. VOL +/-: Adjusts audio volume.
15. Mute Button: Mutes audio.
16. Channel +/- Buttons: Changes channels (Up/Down).
17. YouTube Button: Instantly accesses YouTube.
18. NETFLIX Button: Instantly accesses NETFLIX.
19. Prime Video Button: Instantly accesses Prime Video.
20. Disney+ Button: Instantly accesses Disney+.

*Voice control and some other functions may only work when the RCU is paired with your TV.

**Subscription not included. Netflix is available in certain countries. Netflix access requires creating an account. Broadband internet required. See www.netflix.com/TermsOfUse for details.

***Subscription not included. Prime Video is available in certain countries. Prime Video access requires creating an account. Broadband internet required. See www.primevideo.com for details.

****Subscription not included. Disney+ is available in certain countries. Disney+ access requires creating an account. Broadband internet required. See www.disneyplus.com for details.

2.5 Install Batteries

Open the remote control cover and insert 2 LR03 (AAA) batteries into the compartment. The correct battery pole position is indicated inside the battery compartment.

1. Open the cover.
2. Insert the batteries.
3. Close the cover.

ATTENTION: Batteries must not be recharged, disassembled, short-circuited, mixed with other types of batteries, or used with rechargeable batteries.

3. CONNECTION GUIDE

Refer to the diagram below to connect your Google TV Box to the TV's HDMI input.

NOTE: Before starting, please turn off all devices to be connected.

REMARK: The Google TV Box supports both 2.4 GHz and 5 GHz Wi-Fi bands. To connect, go to Settings -> Network.

• Connect the Google TV Box to your TV using the HDMI cable. Tip: use type 2.1 (included) as it supports UHD, HDR, and Dolby Vision.
• Using an Ethernet cable, connect the TV box's LAN port to the LAN port of your router or broadband home network.
• Connect the TV Box to power using the supplied power adapter. Then turn on your device.

REMARK: Before turning on your device, please set the TV's signal input to the correct source.

4. INSTALL THE DEVICE

You can start the Leap S3 after correctly connecting all the hardware.

To use Google Assistant on your remote control, you must first pair your Bluetooth remote control with the Leap S3 for 5 seconds. Follow the on-screen pairing instructions.

To use Google Assistant on your remote control, please pair the remote control with the Leap S3. Press and hold the and buttons simultaneously for 5 seconds. The indicator light starts to blink.

Step 1: Language

Select the desired language on the home screen.

Step 2: Location Settings

Select the region or country where you are using the Google TV box.

Step 3: Installation with the "Google Home" App

Configure the TV box by downloading/opening the Google Home app on your phone. Scan the QR code with your phone and follow the instructions to start the Google Home app. You can also start the installation on the TV screen by pressing the down arrow to begin. Please follow the on-screen instructions.

Step 4: Wi-Fi

If you are not connected to the Internet using an RJ45 cable, the Wi-Fi configuration will appear. Select your Wi-Fi network here.

Step 5: Google Account

Log in with your Google account and password.

Step 6: Terms of Service and Privacy Policy

Read and accept the Terms of Service and Privacy Policy.

Step 7: Diagnostic Report Settings

Indicate whether you want to allow your TV Box to send diagnostic and usage data automatically to Google.

Step 8: Get to know your Google Assistant

Activate the Google Assistant function for the functionality to work on your remote control. Activate or deactivate personal results or recommendations.

Step 9: Choose your subscriptions

Select or deselect recommended applications that will be automatically installed. Some applications are forced and cannot be deselected. Select Confirm to continue.

Step 10: Configure remote control buttons

If you want to configure certain functions of the connected device buttons such as TV, Source, Volume. Follow the on-screen instructions. Select Continue to skip this configuration. Later, when you have more time, you can access this configuration again via the settings menu.

Step 11: Welcome to Google TV

A discovery of your device's functions.

Click DONE after the guide to start using your device. You are now ready to begin.

5. SETTINGS

Press the settings button to access the settings. Select Settings to check device information, add/remove accounts, and make system setting changes.

Display and Sound

Select HDMI-CEC to configure connections and settings via CEC (Consumer Electronics Control). Select Display Settings to select screen formats and resolutions. Select Audio Settings to configure Dolby and audio formats.

Network and Internet

Under Network Settings, select and enable Wi-Fi to connect to the network. Once the device has scanned and listed nearby Wi-Fi networks, select the appropriate network name, enter the password if necessary, and select Connect.

Add a new account

For new Google users: create a new Google account via the Google TV box to facilitate connection and payment security. Add an account or change accounts under Accounts in the "Settings" menu.

Accounts

Add account

Apps

Select this option to view access permissions, application versions, and to uninstall applications.

Bluetooth Pairing

Select Settings from the menu launcher, click Remote control and accessories, then select the device to pair. Ensure the device you wish to pair is in pairing mode. In this menu, you can configure certain remote control buttons to control volume, power, input sources on the TV, or digital amplifiers.

Remove a Bluetooth device

Select "Settings" from the menu launcher. In the Remote control and accessories menu, select the Bluetooth device you wish to remove. Click "Forget" to remove the device.

Language Settings

Under Settings > System > select Language to change the previously set language.

About

You can check your device information by clicking ABOUT in the "Settings" menu under "Device preferences". This page displays your device model, version, firmware version, and more. You can also update your system by clicking System Update in this menu.

Factory Reset

Under Settings, System > About > Reset. Click "Reset" to delete everything. This option will delete all manually installed applications and all user data.

6. DOWNLOAD APPLICATIONS

Applications are available on the "Google Play Store". Select "Search" and type the name or press the microphone and say the name.

7. GOOGLE CAST

Display content from a mobile device.

Some applications allow you to display content directly on your TV screen. Simply follow the steps below.

Open a compatible "Google cast" application on your mobile device.

Navigate to the screen you wish to display.

Display from Google Cast

Google Cast is integrated into this device. To cast from Google Cast, click the Settings icon ⚙️ located in the upper right corner of the browser, then click "Cast".

8. GOOGLE ASSISTANT

Examples:

• Say and play: Ask to play content, and it will be played. Enjoy.
• Movies and TV Shows: Say "Play Stranger Things on Netflix".
• Applications: Open YouTube. Search for sitcoms. Info: "Tell me about Game of Thrones".
• Control: Play ▶️ Pause. Stop. Resume playback. Lower volume ?, Increase volume ?.
• Listen to music, news, or podcasts: Music: Play music by Sia on.... (The assistant will play music of your choice). News: What is the latest information?

Ask Google

Sports: What is the score of PSG-OM? When is the next match for the French football team? Calculate: What is 12X66? What is 20% of 80?

Dictionary: What does "ludique" mean?

Find answers: How far is the Moon from the Earth? How to remove a stain from a carpet? Unit conversions: How many feet in a meter? To start, press the button. Speak into your remote control's microphone.

Learn more about Google Assistant at assistant.google.com or say "What can you do?" Ask a question aloud, e.g., "What's the weather like in Paris?"

REMARK: To use Google Assistant with the remote control, it must be paired with the Leap S3.

9. PROBLEMS AND SOLUTIONS

10. TECHNICAL SPECIFICATIONS

Video Decoder

• Format: 16:9, Auto/Full screen
• Video Resolution: 4Kp60, 1080p60, AV1, VP8/VP9, HEVC H.265, AVC H.264, MPEG-4, MP@ML, MP@HL profiles, Dolby Vision, HDR10+, HDR10, HLG

Audio Decoder

• Audio Decoder: 32KHz to 192KHz sample rates, Dolby Digital* MS12, Dolby* ATMOS, AAC LC, AAC LC + SBR Level 2, AAC 5.1, HE AAC Level 2 & Level 4, MPEG Audio Layers 1, 2 &3, MPEG-4 Audio
• * Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

System & Memory

• Android Version: 11
• CPU: Amlogic S905Y4 Quad Core Cortex-A35, 2.0 GHz
• GPU: ARM G31 MP2 OpenGL ES 3.2 Graphics engine
• SDRAM: LPDDR RAM: 2 GB
• Flash: eMMC: 16 GB

Connectors

• HDMI: Version 2.1
• Ethernet: RJ45, 10/100
• USB 2.0: Type A, 500mA
• S/PDIF: Optical
• DC IN: 12V, 1A

General Data

• Wi-Fi: IEEE 802.11b/g/n, 2.4 GHz, IEEE 802.11a/n/ac, 5 GHz
• Bluetooth: 5.0 (LE 4.2)
• Power Supply: 100-240 V AC, 50/60 Hz
• Input Voltage: DC 12 V, 1 A
• Power Consumption (in operation): 7 W (max.)
• Operating Temperature Range: 0~+45 °C
• Storage Temperature: -10 ~ +70 °C
• Dimensions (L x W x H) in mm: 96 x 96 x 20.5
• Weight: 153 g

Data Protection

Please note that STRONG, its manufacturing partners, application providers, and service providers may collect and use technical data and related information, including but not limited to technical information about this device, system, and application software and peripherals. STRONG, its manufacturing partners, application providers, and service providers may use this information to improve products or to provide you with services or technologies, provided they are in a form that does not personally identify you.

Furthermore, some services provided - already on the device or installed by you - may require registration for which you must provide personal data. Also, be aware that some services that are not pre-installed but can be installed may collect personal data even without providing additional warnings, and that STRONG cannot be held responsible for any violation of data protection by non-pre-installed third-party services.

* Application availability depends on the country of use. STRONG cannot be held responsible for third-party services. Third-party offers may be modified or withdrawn at any time, may not be available in all regions, and may require a separate subscription.

Service Center

Contact information for various countries is provided below:

• AT: support_at@strong-eu.com, 0820 400 150
• BG: support_bg@strong-eu.com, +359 32 634451
• CZ: support_cz@strong-eu.com, 844 44 44 90
• DE: support_de@strong-eu.com, 0800 7788 787
• DK: support_dk@strong-eu.com
• ES: support_es@strong-eu.com, +34 91 119 61 76
• FR: support_fr@strong-eu.com
• HR: +385 1 344 57 66
• HU: support_hu@strong-eu.com, +36 1 445 26 10
• IT: support_it@strong-eu.com
• NL: support_nl@strong-eu.com
• PL: support_pl@strong-eu.com
• PT: support_pt@strong-eu.com, +351 2 100 06 125
• SK: support_sk@strong-eu.com, 0850 15 05 50
• SL: +386 1 828 08 58
• UA: support_ua@strong-eu.com, +380 (44) 238 61 50

Supplied by STRONG Austria

Represented by STRONG Ges.m.b.H.

Teinfaltstraße 8/4.Stock, A-1010 Vienna, Austria

Email: support_at@strong-eu.com

Licenses

This product contains one or more copyrighted programs protected by international and US copyright laws. They are confidential and the property of Dolby Laboratories. Reproduction or disclosure, in whole or in part, or the production of derivative works without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.

EU Declaration of Conformity - Simplified

STRONG declares that the LEAP-S3+ & LEAP-S3+V2 devices comply with Directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following Internet address: https://eu.strong-eu.com/downloads/

Subject to change. Due to ongoing research and development, technical specifications, design, and product appearance may change. Google, Google Play, YouTube, Android TV, and other marks are registered trademarks of Google LLC. Wi-Fi, WPA2, WPA are registered trademarks of Wi-Fi Alliance®. Skype is a registered trademark of Skype and STRONG is not affiliated, sponsored, authorized, or otherwise associated by/with the Skype group of companies. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. The terms HDMI, HDMI High-Definition Multimedia Interface, trade dress, and HDMI logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. All other product names are trademarks or registered trademarks of their respective owners. © STRONG 2025. All rights reserved.