Instructions for Mimaki models including: 600, 1800, Tiger 600-TS Dye Sublimation Printer, Tiger 600-TS, Dye Sublimation Printer, Sublimation Printer
T ige r6 0 0 -T S Print Scan Speed Settings Instructions
Introduction
This document explains how to specify the settings of the print scan speed for the Tiger600-TS. Read this document carefully before using the printer. Use this function to reduce the amount of dot offset in the Y direction that occurs between passes as shown in the figure below.
[Y-direction offset between passes]
As this function reduces the scan speed, the productivity of the printer is reduced in exchange for improved image quality.
Precautions
· It is strictly prohibited to write or copy a part or all of this document without the express permission of Mimaki Engineering.
· Although every effort has been made to ensure the accuracy of the contents of this document, please contact your local distributor or our sales office if you have any inquiries or doubts regarding the contents.
· This document is subject to change without notice for reasons of improvement. · Mimaki Engineering shall not be liable for any damages whatsoever (including, but not limited to, lost profits,
indirect damages, special damages, or other pecuniary damages) arising out of the use of or inability to use this product, except as provided for by the provisions of the warranty of Mimaki Engineering. The same shall also apply if Mimaki Engineering has been informed of the possibility of damage. As an example, the company shall not be liable for any loss of media (such as workpieces or sheets) by the use of this product, or indirect loss caused by the creation of any materials using the media. · The latest version of this document can also be downloaded from our website.
Notations Used in this Manual
· Items and buttons that appear in menus and on screens are enclosed in [ ] (brackets), as in [File].
Symbols
· This symbol indicates a precaution item or some action that must be performed.
· This symbol indicates information that is helpful to know.
Setting the Print Scan Speed
You can set the scan speed during printing. This setting is only enabled for [WF2] jobs and functions as shown in the table below.
Print scan speed 100% 70% 50%
WF1 (600dpi) (always 100%)
Disabled Disabled
WF2 (300dpi)
Procedure
1. From the MPC menu, tap [SETTING 1] > [PRINT]> [Print Scan Speed]. · The [Print Scan Speed] settings screen appears.
2. Set the print scan speed. · You can select 50%, 70%, or 100%.
3. Tap [SET] to exit.
- 2 -
Adjustment
If necessary, perform bi-directional adjustment according to the following procedure.
1. From the MPC menu, tap [SETTING 2] > [Bi-directional adjustment] > [WF2 pattern] · Print a bi-directional adjustment pattern. · The pattern is printed at the set print scan speed.
2. Enter the bi-directional adjustment value from the menu below according to the print scan speed you have set. · Only the adjustment menu corresponding to the selected print scan speed is enabled.
Print scan speed 100% 70% 50%
Menu [SETTING 2] > [Bi-directional adjustment] > [Adjust WF2(100%) Bi-directional print] [SETTING 2] > [Bi-directional adjustment] > [Adjust WF2(70%) Bi-directional print] [SETTING 2] > [Bi-directional adjustment] > [Adjust WF2(50%) Bi-directional print]
- 3 -
T ige r6 0 0 -T S
Tiger600-TS Y
Y
· ·
· ·
( ) ( , ) ·
· [ ] [ ]
·
·
[WF2]
100% 70% 50%
WF1 600dpi 100%
WF2 300dpi
1. MPC MENU [ 1] > [ ] > [ ]
· [ ]
2. · 50%70%100%
3. [ ]
- 2 -
1. MPC MENU [ 2] > [ ] > [WF2 ] · ·
2. ·
100% 70% 50%
[ 2] > [ ] > [ WF2 100% ] [ 2] > [ ] > [ WF2 70% ] [ 2] > [ ] > [ WF2 50% ]
- 3 -
D203866-11-30082024
IG/AI
© MIMAKI ENGINEERING CO., LTD.2024
MO
Acrobat Distiller 24.0 (Windows)