KEM-BS SERIES

Three Phase Superior Performance EMI Filter – Bookshelf Type Single Stage Delta Configuration

DATASHEET

Bookshelf design for motor drive applications requiring minimum space and convenient installation with superior performance at significant interference levels.

Image: Two EMI filter units shown. One labeled 'STANDARD' and the other 'NEW-DIN RAIL'.

Typical Circuit Diagram

Diagram: A schematic showing a three-phase input (L1, L2, L3) connected through a filter circuit to an output. The circuit includes inductors and capacitors, with a ground connection (E).

Features

3 Phase filters for Drives/invertors
Bookshelf Design
Chassis mounting

Applications

Industrial Automation
HVAC
CNC Machines

Specifications

Electrical Characteristics

Characteristic	Value
Maximum Continuous Operating Voltage	440/520VAC
Current Ratings	7A to 150A @40°C, Din Mount 7A to 100A @40°C
Operating Frequency	50/60Hz
High Potential Test Voltage -440VAC	Line to Ground 2632VDC for 1 Minute; Line to Line 1892VDC for 1 Minute
High Potential Test Voltage -520VAC	Line to Ground 2856VDC for 1 Minute; Line to Line 2236VDC for 1 Minute
Overload Capability	135% of Rated current for 15 minutes

Functional Characteristics

Characteristic	Value
Operating Temperature Range	-25°C to +85°C
Climatic Category	25/85/21
Termination	Shock Proof
Flammability corresponding to	UL 94 V-0

Reference Standards

Design Corresponding to	Standard
	UL 60939-3 and CSA 22.2 No.8-13

Selection Table – Standard Version

TE Ordering Number	Catalog Number	Rated Current @40°C	Rated Voltage @40°C	Leakage Current (mA)	Termination	Weight (Kgs)
2-1609967-7	7KEMS10ABSD	7A	440 VAC	5	41	0.7
3-1609967-0	16KEMS10ABSD	16A	440 VAC	5	41	0.8
3-1609967-1	30KEMS10ABSD	30A	440 VAC	5	41	0.8
3-1609967-2	42KEMS10ABSD	42A	440 VAC	10	10	1.2
3-1609967-3	55KEMS10ABSD	55A	440 VAC	10	10	2
3-1609967-4	75KEMS10ABSD	75A	440 VAC	10	16	2
3-1609967-5	100KEMS10ABSD	100A	440 VAC	10	25	3
3-1609967-6	120KEMS10ABSD	120A	440 VAC	10	50	4
3-1609967-7	150KEMS10ABSD	150A	440 VAC	10	50	4
5-1609967-7	7KEMS10BBSD	7A	520 VAC	5	41	0.7
6-1609967-0	16KEMS10BBSD	16A	520 VAC	5	41	0.8
6-1609967-1	30KEMS10BBSD	30A	520 VAC	5	41	0.8
6-1609967-2	42KEMS10BBSD	42A	520 VAC	10	10	1.2
6-1609967-3	55KEMS10BBSD	55A	520 VAC	10	10	2
6-1609967-4	75KEMS10BBSD	75A	520 VAC	10	16	2
6-1609967-5	100KEMS10BBSD	100A	520 VAC	10	25	3
6-1609967-6	120KEMS10BBSD	120A	520 VAC	1	50	4
6-1609967-7	150KEMS10BBSD	150A	520 VAC	10	50	4

Selection Table – Din Rail Mount

Image: Three mounting options shown: 'NEW' (Din Rail Mount), 'VERTICAL MOUNT', and 'HORIZONTAL MOUNT'.

TE Part Number	Catalog Number	Din Type	Rated Current @40°C	Rated Voltage @40°C	Leakage Current (mA)	Termination	Weight (Kgs)
8-1609967-1	7KEMS10ABSDDM	DUAL	7A	440 VAC	5	41	0.8
8-1609967-2	16KEMS10ABSDDM	DUAL	16A	440 VAC	5	41	0.9
8-1609967-3	30KEMS10ABSDHM	HORIZONTAL	30A	440 VAC	5	41	0.9
8-1609967-4	42KEMS10ABSDHM	HORIZONTAL	42A	440 VAC	10	10	1.3
8-1609967-5	55KEMS10ABSDHM	HORIZONTAL	55A	440 VAC	10	10	2.1
8-1609967-6	30KEMS10ABSDVM	VERTICAL	30A	440 VAC	5	41	1
8-1609967-7	42KEMS10ABSDVM	VERTICAL	42A	440 VAC	10	10	1.4
8-1609967-8	55KEMS10ABSDVM	VERTICAL	55A	440 VAC	10	10	2.2
8-1609967-9	75KEMS10ABSDDM	DUAL	75A	440 VAC	10	16	2.2
9-1609967-0	100KEMS10ABSDDM	DUAL	100A	440 VAC	10	25	3.2
7-1609968-2	7KEMS10BBSDDM	DUAL	7A	520 VAC	5	41	0.8
7-1609968-3	16KEMS10BBSDDM	DUAL	16A	520 VAC	5	41	0.9
7-1609968-4	30KEMS10BBSDHM	HORIZONTAL	30A	520 VAC	5	41	0.9
7-1609968-5	42KEMS10BBSDHM	HORIZONTAL	42A	520 VAC	10	10	1.3
7-1609968-6	55KEMS10BBSDHM	HORIZONTAL	55A	520 VAC	10	10	2.1
7-1609968-7	30KEMS10BBSDVM	VERTICAL	30A	520 VAC	5	41	1
7-1609968-8	42KEMS10BBSDVM	VERTICAL	42A	520 VAC	10	10	1.4
7-1609968-9	55KEMS10BBSDVM	VERTICAL	55A	520 VAC	10	10	2.2
8-1609968-0	75KEMS10BBSDHM	DUAL	75A	520 VAC	10	16	2.2
8-1609968-1	100KEMS10BBSDHM	DUAL	100A	520 VAC	10	25	3.2

Connectors Cross Section

	41	10	16	25	50
Wire Section (mm²)	4mm²	10 mm²	16 mm²	25 mm²	50 mm²
Wire Section (AWG)	12AWG	8 AWG	6 AWG	4 AWG	1/0 AWG
Wire Stripping	Max 10mm	max 13.5 mm	max 17 mm	max 17 mm	max 20 mm
Max Recommended Torque	0.5 Nm / 4.5 in.lbs	1.2 Nm / 10.8 in.lbs	2÷2.2 Nm / 18÷19.8 in.lbs	2 Nm / 18 in.lbs	6 Nm / 54 in.lbs

Insertion Loss (Typical) – Measured in Closed 50Ω System

Common Mode 50Ω / 50Ω

Current Rating	0.01	0.05	0.15	0.5	1	3	5	10	30
7A	54	56	48	71	82	70	65	40	16
16A	42	34	46	80	73	48	40	29	13
30A	40	26	47	70	73	51	44	34	13
42A	20	13	46	78	69	50	42	32	12
55A	24	28	32	73	66	56	48	36	19
75A	23	32	36	71	67	60	54	30	17
100A	21	32	36	69	58	56	50	30	17
120A	19	28	33	70	60	56	49	26	18
150A	20	20	31	65	40	28	24	19	11

Differential Mode 50Ω / 50Ω

Current Rating	0.01	0.05	0.15	0.5	1	3	5	10	30
7A	30	32	40	69	54	50	48	34	25
16A	28	30	42	79	81	58	43	8	22
30A	28	21	37	76	82	67	49	20	28
42A	18	21	35	83	74	64	45	13	27
55A	22	30	34	69	70	58	40	49	22
75A	38	40	45	86	81	68	50	49	35
100A	36	40	47	80	75	62	54	50	35
120A	32	35	45	78	72	60	54	47	31
150A	31	30	34	48	39	28	23	17	15

Graph: Common Mode Insertion Loss (Typical in dB) for 7A and 16A current ratings, showing insertion loss across frequency from 0.01 MHz to 30 MHz.

Case Dimensions - Standard Version

Diagrams: Detailed dimension drawings for 7A, 16A, 30A, 42A, 55A, and 75A Shock Proof Type EMI filters, showing front, side, and top views with measurements in millimeters.

Case Dimensions – Din Rail Mount

Diagrams: Detailed dimension drawings for Din Rail Mount configurations: 7A Shock Proof Type - Dual Mount, 16A Shock Proof Type - Dual Mount, 30A Shock Proof Type - Horizontal Mount, 30A Shock Proof Type - Vertical Mount, 42A Shock Proof Type - Horizontal Mount, 42A Shock Proof Type - Vertical Mount, 55A Shock Proof Type - Horizontal Mount, 55A Shock Proof Type - Vertical Mount, 75A Shock Proof Type - Dual Mount, and 100A Shock Proof Type - Dual Mount. These diagrams illustrate mounting brackets and dimensions.

How to Order

The ordering code is structured as follows:

[Current Rating] KEM S [Series Type] [Filter Stage] [Termination] [Voltage] [Mounting/Type]

Current Rating: e.g., 30A
Series Type: KEM
Filter Stage: S (Single), D (Dual)
Termination: 1 (Quick Connect), 6 (Nut & Bolt), 10 (Shock Proof)
Voltage: A (440VAC), B (520VAC)
Mounting/Type: DM (Dual Mount), HM (Horizontal Mount), VM (Vertical Mount)
Additional Type: STAR - D, WYE - W, Fully Potted - FP, Book Shelf - BS

Example: 30KEMS10ABSDHM indicates a 30A filter, KEM series, Single Stage, Shock Proof termination, 440VAC, Dual Mount, Horizontal Mount.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

TE Connectivity: 55KEMS10ABSD

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 13 Pages, 847.06KB

ENG DS 2376456 1 A1-2075837 GPL Ghostscript 9.10

Related Documents

	TE Connectivity EJT Series High Performance Power Inlet Filters TE Connectivity's EJT Series offers high-performance power inlet filters with superior EMI filtering up to 1GHz. This guide details specifications, ordering information, performance data, and electrical schematics for the EJT Series filters.
	TE Connectivity FASTIN-FASTON Product Line: Insulated and Uninsulated Terminals Explore the comprehensive FASTIN-FASTON product line from TE Connectivity, featuring a wide range of insulated and uninsulated terminals, receptacles, and housings. This document details specifications, part numbers, and applications for various series, including 250, 187, and 110, as well as RAST 5 tab housings. Ideal for automotive, appliance, and industrial applications.
	TE Connectivity Heavy Duty Connectors Catalog Explore TE Connectivity's comprehensive catalog of Heavy Duty Connectors (HDC), designed for demanding industrial applications. Discover product overviews, hoods, housings, inserts, and accessories for robust power, signal, and data transmission.
	TE Connectivity FWFU Series Fusible Wire Wound Fixed Resistors Detailed technical specifications, features, applications, construction, performance characteristics, and packaging information for TE Connectivity's FWFU Series Fusible Wire Wound Fixed Resistors.
	TE Connectivity INS SOC ASSY 0104-202-2402 Product Information Product details for TE Connectivity's INS SOC ASSY, part number 0104-202-2402. Includes compliance information and links to available documentation.
	TE Connectivity 1551524-2 WiFi Antenna with 210mm Cable Product details for the TE Connectivity 1551524-2 WiFi Antenna, featuring a 210mm cable. Information includes product drawings and compliance details.
	TE Connectivity JJF Series Detector Switches - Technical Specifications and Applications Detailed information on TE Connectivity's JJF Series Detector Switches, including applications in automotive, instrumentation, white goods, and telecommunications. Features, specifications, and ordering information are provided.
	TE Connectivity Corcom EP/VP Series Dual Stage RFI Power Line Filters TE Connectivity's Corcom EP/VP Series offers dual-stage RFI power line filters designed for switching mode power supplies. These filters provide high insertion loss and are well-suited for meeting CISPR 22 A and FCC Part 15J, Class B standards. The EP models offer very low leakage current requirements, while the 7A and 12A versions provide an optimum package size. The series includes various input/output styles and current ratings from 3A to 20A.