Sami WS-2386 Smartband User Manual
RUNNING 8 PRO SMARTBAND
Thank you for purchasing the Sami wearable WS-2386. Read the instructions carefully to obtain optimum results and preserve it for future reference.
Contents
- Wearable
- USB magnetic charging cable
- Instruction manual
Charging
Connect the device to a computer or laptop with the USB Magnetic cable for charging. Put in contact the magnetic end of the USB cable with the charging points positioned in the back of your device. Kindly use only the USB cable included with the wearable. If you use a power adapter for charging, the output of the power adapter should be 5V, 1A.
Charging time: 1-2 hours approx. Please charge the device fully before using it. Take care with the magnet side of the cable; if you connect to the AC and have contact with a metal surface, you may damage the charging cable.
How to Power On / Power Off
- To turn ON the smart band, long press the touch point for a few seconds and the device will turn on.
- To turn OFF the smart band, short press the touch button to go through the menu to Function mode. Long press to enter the mode, select power off, and long press to confirm device offing.
Getting Started
APP Download
1) How to obtain the BT Connection APP / APK (Dayband)
Search for the Dayband APP in the Play Store for Android devices; download and install it on your Android smartphone, or go to our website www.sami.es and download the application.
For iPhone, search Dayband in the App Store and download to proceed with installation on your device.
Installation of the Dayband APP
When installing the Dayband application on your smartphone, you must allow all Application Permissions and allow this Dayband app to auto-run. The first time you run this Dayband app, it will ask you to Enable Notifications; please tap OK and tap the Dayband and confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On your smartphone's permission management, allow all application permissions.
How to make the wearable pair with your smartphone?
*First, turn on the Bluetooth of your Phone.
*Second, run the Dayband app on your Phone. On the home page of Dayband, find the pairing request by setting all your values. Then select "watch". You must have the screen of the watch on. The APP will search for new Bluetooth device(s). When the available Bluetooth device displays, please select WS-2386 (the BT name of this device). Select the device on the app to make it pair.
When you pair for the first time, the Dayband app will ask you to enable GPS and Bluetooth, and authorize Dayband to get access to the location service while using the app. Please accept all the requests for the correct functioning of the device. When you finish, select OK/Confirm/Allow for any pop-up request.
Notifications
Important: To enable all notifications from different software such as WhatsApp, Facebook, Skype, Twitter, you will need to turn on the notifications on the APP manually. On the Dayband homepage, select the icon “Device” (situated on the right bottom of the screen) ➡️ select "WS-2386" ➡️ select "message notification" ➡️ turn on "Allow notification" and turn on all the APP notifications you want to activate.
Key Features
Main Interface/Dial
In the main interface, a long press on the touch area can directly switch the dial; the dial has a variety of styles.
Pedometer/Distance/Calories
Check the number of walking steps, walking distance, and consumption at any time of the day. Calories can be synchronously updated to the APP to view sports data.
[? 2600 STEPS]
[?️ 13.5 KM]
[? 1500 KCAL]
Heart Rate
Switch to the heart rate test interface to enter real-time heart rate detection. Measurement volume data can be updated to the APP synchronously. And there is a test report.
[❤️ 106 BPM]
Blood Pressure
Switch to the heart rate test interface to enter real-time heart pressure detection. Measurement volume data can be updated to the APP synchronously. And there is a test report.
[? 102/97 MMHG]
Blood Oxygen
Switch the watch to the blood oxygen test screen to enter the blood oxygen monitoring. Note: The test results are for reference only and cannot be used as medical data.
[? 00% SpO2]
Motion / Sports
Long press the touch button to enter the sport mode detection; there are a variety of transport dynamic modes available. Long press the sport mode to enter, click to switch the mode, long press to start the calculation, long press to stop.
[? Training]
Message Interface
In the message interface, long press to view the message, click to turn the page, view finished Message to exit.
[? Message]
Functional Interface
In the more functional interface, long press the touch area to enter the lower level Menu for more operations.
[⚙️ Function]
About Page
Long press the touch area on this page; the bracelet will display the last four digits of the Bluetooth address and the version number.
[ℹ️ About]
Restore Function
Long press the touch area on this page to restore the bracelet factory Settings.
[↩️ Reset]
Shutdown Function
Long press the touch area on this page; the bracelet will vibrate and shut down.
[❌ Off]
Find Function
Long press the touch area on this page; the phone will vibrate or ring as a sound reminder.
[? Find]
Brightness Adjustment Function
Long press the touch area to enter on this page; you can freely choose the screen brightness.
[? Brightness]
Sleep Monitoring Function
Wear the bracelet to fall asleep; you can monitor the length of sleep, and deep Sleep and light sleep state. You can adjust your sleep according to the data sleep status to improve your body health index.
Technical Specifications
| Specification | Value |
|---|---|
| Display screen | TFT LCD screen 1.14". Full colour touch screen |
| Screen resolution | 135x240pixels. |
| Internal Memory | 32mb |
| MCU | SYD8810 |
| Acceleration and gyroscopes | SC7A20 |
| Heart rate sensor | SCR7R31E |
| Charge I/O port | USB magnetic charging cable |
| Battery | Built in Li-Polymer 180mAh |
| Stand by time | 15-20 DAYS |
| Working time | 5-7DAYS |
| Bluetooth | BLE 5.0 |
| Water-resist Rating | 3ATM (this device resists 30 meters waterproof). Not valid for hot water shower due to vapor. |
| Weight | 25g |
Declaration of Conformity
Hereby we,
Manufacturer Details
- Name of manufacturer: SANTOSHI SL
- Address: CALLE FELIPE ASENJO N.56
- Zip code & City: 28947 - FUENLABRADA ( MADRID )
- Country: SPAIN
declare that this DoC is issued under our sole responsibility and that this product:
Product Information
- Product description: Smart Watch
- Type designation(s): WS-2386
- Trademark: SAMI WEARABLE
is in conformity with the relevant Union harmonization legislation:
- DIRECTIVE EMC 2014/30/EU
- DIRECTIVE LVD 2014/35/EU
- Standard CE (RED): DIRECTIVE 2014/53/EU
- Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.
with reference to the following standards applied:
- EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
- EN 62479:2010
- EN 301 489-1 V2.1.1 (2017-02)
- EN 301 489-17 V3.1.1 (2017-02)
- EN 300 328 V2.1.1 (2016-11)
Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 21/06/2024
