Sami Wearable User Manual

Introduction

Thank you for purchasing the Sami Wearable WS-2359. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and uses the best components possible for the product.

Description of the Wearable

The wearable features a display screen and a touch button. The touch button is located at the bottom of the screen. On the back, it includes health sensors and charging points.

[Image Description: Two views of the Sami wearable. The left view shows the front display with 'DISPLAY SCREEN' and 'TOUCH BUTTON' labels. The right view shows the back with 'HEALTH SENSORS' and 'CHARGING POINTS' labels.]

Contents

• Wearable device
• Magnetic SEAT charging cable
• Instruction manual

Charging

Connect the device preferably to a power adapter. Alternatively, you can connect it to a computer or laptop using the USB cable for charging. Remove the device from the strap if needed and place it on the Magnetic SEAT for charging. Ensure the charging points align correctly with the SEAT. Use only the USB cable included with the wearable. If using a power adapter, its output should be 5V, 1A. Charging time is approximately 2 hours. Please charge the device fully before using it. ??

[Image Description: The wearable is shown connected to its magnetic charging SEAT. Another image displays the magnetic SEAT and the included USB cable.]

How to Power On / Power Off?

1. To Power ON: On the screen, long press the touch button (the fixed-point touch control area) for a few seconds. The touch button is situated at the bottom of the screen. ⚡️
2. To Power OFF: From the home screen menu, short press the touch button until the Function (Settings) menu displays. Then, long press the touch button to enter the Function menu. Short press the touch button until the Power Off icon displays, then long press again for a few seconds to power off. ?

How to Control?

On the display screen, short press the touch button to cycle through different menus. Long press the touch button to enter a selected menu or function. Long press the touch button to return to the previous screen or achieve different functions. ?

Getting Started

For Android

1. Obtain the BT Connection App (FLAGFIT 2.0): Search for the FLAGFIT 2.0 APP in the Play Store, download, and install it on your Android smartphone. Alternatively, visit www.sami.es to download the application.
2. Installation of the FLAGFIT 2.0 APK: During installation, allow all Application Permissions and enable auto-run for FLAGFIT 2.0. The first time you run the app, you will be prompted to enable notifications; tap OK and confirm. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up requests. Ensure all application permissions are allowed in your Android permission management.
3. Pairing the Wearable with your Android Smartphone:
   • First, turn on Bluetooth on your phone.
   • Second, run the FLAGFIT 2.0 app. On the app's home page, select “Me” (located at the bottom right), then select “Add device”. The app will search for new Bluetooth devices.

When the available Bluetooth device (WS-2359) appears, select it to pair. Pairing completes in a few seconds. The app may ask for personal information (gender, age, height, weight) upon first pairing. Confirm any pop-up requests for location, Bluetooth, or notifications. You can now use your smart band's functions. ??

Important: To enable notifications from apps like WhatsApp, Facebook, Skype, and Twitter, you may need to manually turn them on within the FLAGFIT 2.0 app. Navigate to the “Play” icon (center bottom), tap “Call reminder” to enable, then “SMS reminder”, and “More” for other app notifications. Ensure location access is allowed for correct reminder functionality. ?

For full functionality on Android, ensure FLAGFIT 2.0 runs in the background and allow all pop-up requests. You may also need to enable FLAGFIT 2.0 in your smartphone's Accessibility settings.

For iPhone

1. Obtain the BT Connection App (FLAGFIT 2.0): On your iPhone, go to the App Store, search for FLAGFIT 2.0, and install the app.
2. Pairing the Wearable with your iPhone:
   • First, turn on Bluetooth on your iPhone.
   • Run the FLAGFIT 2.0 app. On the home page, select “Profile” (bottom right), then select “+Add a new device”. The app will search for new Bluetooth devices.

When the available Bluetooth device (WS-2359) appears, tap it to pair. Pairing completes in a few seconds. The app may ask for personal information (gender, age, height, weight) upon first pairing. Confirm any pop-up requests for location, Bluetooth, or notifications. You can now use your smart band's functions. ??

Important: To enable notifications from apps like WhatsApp, Facebook, Skype, and Twitter, you may need to manually turn them on within the FLAGFIT 2.0 app. Navigate to the “Play/Smart” icon (center bottom), tap “Call” to enable, then “SMS”, and “More” for other app notifications. Ensure location access is allowed for correct reminder functionality. ?

ATTENTION: For both iOS and Android, the wearable must be paired through the FLAGFIT 2.0 app, not directly via your smartphone's Bluetooth settings. If previously paired via phone settings, unpair and forget the device to ensure correct binding through the app. ?

Product Features

• Bluetooth: V 4.2LE ?
• Touch Button: Fixed-point touch control (not full touch control) ?
• Touch Screen: 0.96"
• Built-in Vibrating Motor
• Built-in Heart Rate Sensor ❤️
• Built-in Gravity Sensor
• Gesture Control to Light Up the Display Screen

Display Screen Interface

The display screen can show:

1. Time, Date, Steps, Battery status, Bluetooth pairing status ⌚️
2. Steps, Calories, Distance (Pedometer) ???
3. Heart rate monitor ❤️
4. Blood pressure test ?
5. Blood oxygen (SPO2) test ?
6. Training modes (Running, Riding, Skipping, Pingpong, Badminton, Tennis) ??????
7. Female health tracking (for ladies only, set via FLAGFIT 2.0 app) ♀️
8. Breath exercise for relaxation ?
9. Messages: Long press the Touch button to view new messages. Long press again to return. ?
10. Functions Menu: Info, Reset, Power Off, Find me (search for phone), Lightness (Brightness) ℹ️???
11. Different dials (clock screens): On the home screen, long press the Touch button to switch between dials. ⌚️

Functions

Data can be synced from the wearable to the smartphone via the FLAGFIT 2.0 app when Bluetooth is paired. ?

• Phone Call Notification: Vibrating reminder for incoming calls. ?
• Message Notification: Vibrating reminder/preview for incoming messages (SMS, WhatsApp, Facebook, Twitter, Skype, etc.). ✉️
• Clock Screens: Various home digital clock faces. ⌚️
• Alarm Clock: Supported via FLAGFIT 2.0 APK/APP. ⏰
• Sedentary Reminder (Inactivity Reminder/Remind to Move): Supported via FLAGFIT 2.0 APK/APP. ?➡️
• Find The Device: Locate the smart band using the app. ?
• Shake to Take Selfie: Remote camera control. ?
• Gesture Control: Raise your hand to light up the screen (requires adjustment in FLAGFIT 2.0 app).
• GPS Map Trace Tracking: Supported via FLAGFIT 2.0 APK/APP. View and store real-time GPS maps. ??️
• Multiple Languages: Supported via FLAGFIT 2.0 APK/APP. Some icons may appear in English.
• Ladies' Physiological Cycle Calculator: Supported via FLAGFIT 2.0 APK/APP. ?️
• Goal of Steps Tracking: Supported via FLAGFIT 2.0 APK/APP. ?

⚠️ IMPORTANT DISCLAIMER: THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE APPROXIMATE.

Cleaning and Maintenance

To avoid damage to the plating or printing of your wearable, do not use chemical products like 96° alcohol for cleaning. We recommend using a slightly wet cloth. ?

Technical Specifications

Declaration of Conformity

Manufacturer: SANTOSHI SL

Address: CALLE FELIPE ASENJO N.56, 28947 - FUENLABRADA (MADRID), SPAIN

This product, Product description: Smart Band, Type designation(s): WS-2359, Trademark: SAMI WEARABLE, is declared to be in conformity with the relevant Union harmonization legislation:

• DIRECTIVE EMC 2014/30/EU
• DIRECTIVE LVD 2014/35/EU
• Standard CE (RED): DIRECTIVE 2014/53/EU
• Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.

With reference to the following standards applied:

• EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
• EN 62479:2010
• EN 301 489-1 V2.1.1 (2017-02)
• EN 301 489-17 V3.1.1 (2017-02)
• EN 300 328 V2.1.1 (2016-11)

Signature: [Signature Placeholder]

Full name: VISHAL MIRPURI

Position: ADMINISTRATOR

Date: 01/07/2021