Small Triangle Assembled

Assembly Parts

1.1 Long Sidewall (2pcs): A long wooden piece with pre-drilled holes for assembly.
1.2 Short Sidewall (2pcs): A shorter wooden piece with pre-drilled holes for assembly.
1.3 Long nog Ø30 mm (11pcs): Wooden dowels or rods with a diameter of 30mm.
1.4 Left connector (1pc): A triangular wooden piece marked 'L' with holes for connecting other parts.
1.5 Right connector (1pc): A triangular wooden piece marked 'R' with holes for connecting other parts.
1.6 Level controller (2pcs): A component used to adjust the angle or position of the assembled triangle.
2.1 Flat head 35mm screw (20pcs - 2pcs spare): Screws with a flat head, 35mm in length.
2.2 Round head screw (2pcs - 1pc spare): Screws with a rounded head.
2.3 4mm hex key (1pc): A hexagonal wrench with a 4mm size.
2.4 5mm hex key (1pc): A hexagonal wrench with a 5mm size.

Video assembly available online. Scan the QR code to watch.

Safety Warning: To be used under the direct supervision of an adult only. Always be vigilant during children's games. Note: Peculiarities of the product in video may differ from the actual product. This instruction has the most relevant information.

Step 1

1. Take the Short sidewall (1.2). There are 5 holes for rods in the Short sidewall.

2. Insert the round head screw (2.2) with a metal washer into the designated hole and screw it into the long nog (1.3).

3. Use 5 flat head screws (2.1) to attach the long nogs (1.3) through the short sidewall (1.2).

Diagram shows a close-up of a round head screw (2.2) and a metal washer being inserted into a long nog (1.3) through a hole in the short sidewall (1.2). Another close-up illustrates flat head screws (2.1) securing long nogs (1.3) to the short sidewall (1.2).

Step 2

1. Gather the Long Sidewall (1.1), long nogs (1.3), Left connector (1.4), and Right connector (1.5).

2. Fasten the Left (1.4) and Right (1.5) connectors to the Long Sidewall (1.1) using screws (2.1). Ensure the 'L' and 'R' markings on the connectors face inwards, as depicted. Do not fully tighten these screws yet (refer to pic.2.2 for detail).

3. Attach the remaining long nogs (1.3) to the Long Sidewall (1.1) using screws (2.1).

Illustration shows a long sidewall (1.1) with long nogs (1.3) being attached. The Left (1.4) and Right (1.5) connectors are being screwed onto the sidewall. A close-up view confirms the 'L' and 'R' letters are oriented inwards. Another close-up details the screw (2.1) insertion into the connectors.

Step 3

1. Place the partially assembled short ladder section onto the large assembled ladder section, ensuring a protruding screw from the short section is aligned.

2. Insert the protruding screw heads (from step 1) into the corresponding special holes on the large ladder section (refer to pic.3.1 and pic.3.2 for alignment). The level regulator (1.6) can be used to assist by inserting its metal thread through the connector and tightening it, which helps guide the screw head into the special hole.

3. Once aligned, tighten all screws securely.

Visuals show the two main sections of the triangle being joined. Close-up diagrams highlight the alignment of protruding screws into special holes and the use of the level regulator (1.6) for precise fitting.

Step 4

Use the level controller (1.6) to adjust the final position and angle of the assembled triangle. Ensure all screws are tightened after assembly.

Small Arch Assembled

Assembly Parts

1.1 Arch Sidewall (2pcs): Curved wooden pieces forming the sides of the arch, with pre-drilled holes.
1.2 Short nog Ø 30 mm (6pcs): Wooden dowels or rods with a diameter of 30mm, used as crossbars.
2.1 Flat head 35mm screw (12pcs + 2pcs spare): Screws with a flat head, 35mm in length.
2.2 4mm hex key (1pc): A hexagonal wrench with a 4mm size.

Video assembly available online. Scan the QR code to watch.

Assembly

Screw the two Arch Sidewalls (1.1) to the Short nogs (1.2) using the Flat head screws (2.1) and the 4mm Hex key (2.2).

Illustration shows the assembly of the arch. Arch sidewalls (1.1) are connected to the short nogs (1.2) with screws (2.1) and a hex key (2.2). A close-up view details the connection point.

Standard Ramp Assembled

Assembly Parts

1.1 Ramp (1pc): The main flat wooden board of the ramp, featuring climbing holds and pre-drilled holes.
1.2 Hook (4pcs): Wooden hook-shaped pieces used for attaching to the ramp.
2.1 Confirmat screw (8pcs - 2pcs spare): Special screws designed for joining wooden components.
2.2 3mm hex key (1pc): A hexagonal wrench with a 3mm size.

Video assembly available online.

Assembly

Attach the Hooks (1.2) to the Ramp (1.1) using the Confirmat screws (2.1). Tighten securely with the 3mm Hex key (2.2).

Illustration shows the ramp board (1.1) with hook pieces (1.2) being attached using confirmat screws (2.1) and a hex key (2.2). A close-up view details the attachment point.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 8 Pages, 2.90MB

B1gDG57ZZHL PDF Presentation Adobe Photoshop iLovePDF

Related Documents

	WoodandHearts Standard Climbing Set User Manual Comprehensive user manual for the WoodandHearts Standard Climbing Set, including assembly instructions, safety guidelines, and care information for the triangle, arch, and ramp.
	Indoor Playground with Bridge User Manual Comprehensive user manual for the WoodandHearts Indoor Playground with Bridge, detailing assembly, safety measures, and care instructions for children aged 3-8.
	WoodandHearts Wooden Playground "Circle" User Manual User manual for the WoodandHearts Wooden Playground "Circle", providing assembly instructions, safety measures, and care guidelines for this indoor sporting equipment designed for children aged 3-8.
	WoodandHearts Indoor Playground Spider User Manual & Assembly Guide Comprehensive user manual and assembly guide for the WoodandHearts Indoor Playground Spider climbing dome. Includes safety instructions, care tips, and step-by-step assembly for this Montessori-inspired play structure.
	WoodandHearts Slide with Legs User Manual Comprehensive user manual for the WoodandHearts Slide with Legs, detailing scope of application, terms of use, safety measures, care and maintenance, and assembly instructions for children aged 3-8.
	WoodandHearts Indoor Playground with Bridge User Manual Comprehensive user manual for the WoodandHearts Indoor Playground with Bridge, detailing assembly instructions, safety measures, care, and maintenance.
	WoodandHearts Swedish Ladder 'Bridge' User Manual & Assembly Guide Comprehensive user manual and assembly guide for the WoodandHearts Swedish Ladder 'Bridge'. Learn about safe installation, usage, care, and maintenance for this versatile children's sports equipment.
	WoodandHearts Swedish Wall User Manual Comprehensive user manual for the WoodandHearts Swedish Wall, detailing assembly, usage, safety measures, and care instructions. Suitable for children aged 3-16.