XNDS Universal Remote Key User Manual
Overview
The XNDS Universal Remote Key is suitable for vehicles equipped with the Xhorse receiver. The operating temperature range for this product is -20°C to 50°C.
Button Description
| Item | Description |
|---|---|
| 1 | Switch button for mechanical key |
| 2 | Lock button |
| 3 | Trunk button |
| 4 | Unlock button |
Change Battery
Follow these steps when first using the product or when the battery needs replacement:
Step 1: Open Cover
Gently pry the plastic cover upward to open it.
Step 2: Replace Battery
Carefully remove the old battery and insert a new one. The recommended battery type is 2032 with 3V. Ensure the positive and negative terminals are correctly oriented.
Step 3: Reassemble
Install the key components back into place, reassembling the device as it was originally.
Pairing Method
To pair the XNDS Universal Remote Key with your vehicle, refer to the specific matching procedures for your vehicle model.
FCC Statements
§ 15.19 Labelling Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
§ 15.21 Information to User
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the User
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Warning for Portable Device
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
CE Statements
Frequency Band(s)
This device operates with the following frequency bands and maximum frequency power. The product is compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model.
RFID (433.92 MHz) Max Pe.r.p. is -28.84 dBm.
EU Declaration of Conformity
Hereby, Shenzhen Xhorse Electronics Co., Ltd. declares that the Universal Remote Key with model XNDS is in compliance with Directive 2014/53/EU and 2011/65/EU.
