XSKF2 Universal Remote Key User Manual

Brand: Xhorse

Overview

The XSKF2 Universal Remote Key is suitable for vehicles equipped with an Xhorse receiver.

Note: The operating temperature of the product is -20°C to 50°C.

Button Description

The remote key features the following buttons:

Diagram: A visual representation of the remote key. Number 1 points to the Lock button, Number 2 points to the Unlock button, Number 3 points to the Trunk button, and Number 4 points to the Panic button.

Item	Description
1	Lock button
2	Unlock button
3	Trunk button
4	Panic button

Change Battery

First use or when the battery runs out, follow these steps to change the battery:

Step 1: Press the button on the back side to release the mechanical key holder.

Step 2: Use a tool to insert into the gap to separate the shell.

Step 3: Take the old battery out and replace it with a new one.

Note: The battery type is 2032 with 3V. Ensure the positive and negative terminals of the battery are correctly oriented.

Step 4: Install the key shell back together, same as before.

Pairing Method

To pair the remote key with a vehicle, refer to the corresponding vehicle models for matching instructions.

FCC Statements

§ 15.19 Labelling requirements.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

§ 15.21 Information to user.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

§ 15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Portable device:

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CE & UKCA Statements

Frequency Band(s)

This device operates with the following frequency bands and maximum frequency power.

Note: The product is compliant with these power limits required by the European Union. Frequency bands supported by the product vary by model.

RFID (433.92 MHz) Max Pe.r.p. is -32.77 dBm.

EU & UKCA DECLARATION OF CONFORMITY

Hereby, Shenzhen Xhorse Electronics Co., Ltd. declare that Universal Remote Key with model XSKF2 is in compliance with Directive 2014/53/EU, 2011/65/EU and RER 2017 (SI2017/1206).

	Xhorse XNDS Universal Remote Key User Manual User manual for the Xhorse XNDS Universal Remote Key, detailing its features, button functions, battery replacement, pairing procedures, and compliance information (FCC, CE).
	XKLK Universal Remote Key User Manual - Xhorse User manual for the XKLK Universal Remote Key by Xhorse, detailing its overview, button functions, battery replacement, and pairing methods. Includes FCC and CE/UKCA compliance statements.
	Xhorse KEY TOOL MAX: Smart Key Programming Device User Manual Comprehensive guide to the Xhorse KEY TOOL MAX, a professional smart device for key programming, remote generation, transponder copying, and more, featuring Bluetooth and Wi-Fi connectivity for automotive applications.
	Xhorse KEY TOOL PLUS User Manual: Automotive Key Programming Guide Comprehensive user manual for the Xhorse KEY TOOL PLUS, detailing its features for automotive key programming, immobilizer matching, transponder cloning, remote generation, and key cutting. Includes specifications, accessories, and operational guides.
	Xhorse Key Tool Max Pro User Manual User manual for the Xhorse Key Tool Max Pro, a professional smart device for vehicle diagnosis, immo programming, and key cutting machine control.
	Xhorse KEY TOOL LITE User Manual: Features, Functions, and Warranty Comprehensive user manual for the Xhorse KEY TOOL LITE, detailing its functions for vehicle remote generation, transponder cloning, frequency detection, and IC/ID cloning. Includes setup, operation, and warranty information.
	Xhorse KEY TOOL MIDI User Manual - Comprehensive Automotive Key Programming and Diagnostic Tool Guide This comprehensive user manual provides detailed instructions for the Xhorse KEY TOOL MIDI, a specialized tablet device for locksmiths and automotive professionals. It covers installation, operation, and advanced features including IMMO programming, remote and transponder functions, TPMS services, key cutting machine control, cloud diagnosis, and more. Learn to maximize the device's capabilities for efficient vehicle key programming and diagnostics.
	Xhorse Bluetooth Digital Smart Key User Manual User manual for the Xhorse Bluetooth Digital Smart Key, detailing features, usage procedures, programming, device binding, OBD diagnosis, digital key functions, remote authorization, and troubleshooting.