Pixsys STR561 Indicator

Introduction

The Pixsys STR561 is a versatile indicator and panel meter designed for the acquisition and retransmission of process data, including fast transients. It features relay outputs for alarm functions, an analog output for process/setpoint retransmission, and programmable digital inputs. This device is available in a standard 96x48mm format and can be configured for both horizontal and vertical mounting.

Key features include an intuitive multilingual interface, a graphic OLED monochromatic yellow display (128x64 pixels), and visualization options such as bargraph and process trend with programmable sampling time. The software supports mathematical functions like totalizer and sum. Serial communication is facilitated via RS485 and Modbus-RTU protocol.

Safety Guidelines

Users are advised to carefully read the safety guidelines and programming instructions in this manual before using or connecting the device. Always disconnect the power supply before performing any hardware settings or electrical wiring. Only qualified personnel should operate or service the device, adhering to the technical data and environmental conditions specified. Proper disposal of electrical tools is essential, following European directives for environmentally compatible recycling.

Key Features & Specifications

• Model: STR561
• Format: 96x48mm
• Display: Graphic OLED 2.42″, 128x64 pixels
• Inputs: Analog (strain-gauge, potentiometer), Digital
• Outputs: Relay (2A/250Vac), Analog (0/4-20mA)
• Communication: RS485, Modbus-RTU
• Power Supply: 24-230 Vac/Vdc ±15%
• Operating Temperature: 0-40 °C
• Sealing: IP54 (front panel), IP20 (box and terminals)
• Software Functions: Alarms, Totalizer, Sum, Trend Visualization, Calibration, Data Logging

Resources

• For detailed technical specifications and wiring diagrams, please refer to the full user manual.
• For product information and support, visit the Pixsys website.