Buderus Logano GE315

Introduction to the Buderus Logano GE315 Boiler

This document provides essential information for the correct installation and maintenance of the Buderus Logano GE315 cast iron sectional boiler. Designed for use with oil or gas pressure jet burners, this boiler meets European Directives and national requirements, as indicated by its CE marking.

The Logano GE315 is intended for generating heating water. It is crucial to adhere to the guidelines and standards applicable in your country for installation and operation. Only qualified personnel should perform installation, fuel supply connections, flue duct connections, commissioning, electrical connections, maintenance, and repair work.

Regular annual maintenance is recommended to ensure the system's proper function. This manual details the procedures for installation, system start-up, maintenance, and troubleshooting, ensuring optimal performance and longevity of your Buderus boiler.

For further details on water treatment, refer to the supplement "Water treatment" and VDI 2035 "Guideline for water treatment". It is also recommended to install a dirt filter and a de-sludge facility in the return line for system protection.

Please retain this document in a safe place, as it is required for annual servicing.

Key Features and Specifications

• Suitable for oil or gas pressure jet burners compliant with EN 267 or EN 676.
• Designed to meet European Directives and national requirements.
• Requires qualified personnel for installation and maintenance.
• Annual maintenance is recommended.
• Maximum flow temperature: 100 °C
• Maximum operating pressure: 6 bar

Important Safety Information

Correct Use: The boiler is intended solely for generating heating water. Any other use is considered improper, and Buderus accepts no liability for damages resulting from such use. Failure to comply with installation and operating instructions may invalidate the warranty.

Handling Boiler Sections: Exercise caution when handling boiler sections to prevent injury. Use appropriate transportation methods and secure sections to prevent slipping or tipping.

Clearances: Maintain recommended clearances from walls for proper burner door opening, installation, cleaning, and maintenance.

Further Information

For the Declaration of Conformity, visit www.buderus.de/konfo or contact your local Buderus office.