RYOBI RY18BLA Cordless Blower

Operator's Manual and Safety Information

The RYOBI RY18BLA cordless blower is depicted on the cover.

Important Information

It is essential to read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modification. Safety, performance, and dependability have been given top priority in the design of your cordless blower.

Intended Use

The cordless blower is intended only for outdoor use, in dry, and well-illuminated conditions. The product is not intended to be used by children or persons with reduced physical, mental, or sensory capabilities. The product is designed for blowing light debris, such as leaves, grass, and other garden waste. Do not use the product for any other purpose.

General Safety Warnings

⚠️ WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

⚠️ WARNING! Never allow children or people who are unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator.

Training

Read the instructions carefully. Be familiar with the controls and the correct use of the product.
Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Do not use the product while tired, ill, or under the influence of drugs, alcohol, or medication.

Preparation

Some regions have regulations that restrict the use of the product to some operations. Check with your local authority for advice.
Wear hearing protection ? at all times while operating the product. The product is noisy, and not strictly adhering to precautions to limit your exposure and to reduce noise may result in permanent hearing injury.
Wear full eye protection ?️ at all times while operating the product. Wear a full face mask or fully enclosed goggles. Normal spectacles or sunglasses are not adequate protection. Objects can be thrown at high speed by the powerful air jet at any time and may rebound from hard surfaces toward the operator.
While operating the product, always wear substantial footwear and long trousers. Do not operate the product when barefoot or wearing open sandals. Avoid wearing clothing with loose fitting or that has hanging cords or ties.
Do not wear loose clothing or jewellery that can be drawn into the air inlet. Secure long hair so it is above shoulder level to prevent entanglement in moving parts.
Before each use, ensure that all controls and safety devices function correctly. Do not use the product if the off switch does not stop the product.
Operate the product in the recommended position and only on a firm and level surface.
Do not operate the product on a paved or gravel surface where ejected material could cause injury.
Before each use, always inspect the housing for damage. Ensure that guards and handles are in place and properly secured. Replace worn or damaged components in sets to preserve balance. Replace damaged or unreadable labels.
Never operate the product while people, especially children, or pets are nearby.
Keep all cooling air inlets clear of debris.
Use rakes and brooms to loosen debris before blowing.
Clear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string that can be blown a considerable distance by high velocity air.
Injuries may be caused or aggravated by prolonged use of a tool. When using any tool for prolonged periods, ensure you take regular breaks.

Battery Tool Use and Care

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery pack terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery pack; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery pack may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion, or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperatures. Exposure to fire or excessive temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Operation

Operate the product only at reasonable hours—not early in the morning or late at night when people might be disturbed.
Never operate the product in an explosive atmosphere.
Avoid using the product in bad weather conditions, especially when there is a risk of lightning.
Keep bystanders, children, and pets 15 m away from the area of operation. Stop the product if anyone enters the area.
Do not operate the product in poor lighting. The operator requires a clear view of the work area to identify potential hazards.
Operating similar tools nearby increases both the risk of hearing injury and the potential for other persons to enter your working area.
Always be sure of your footing on slopes. Walk, never run.
Keep proper footing and balance. Do not overreach. Overreaching can result in loss of balance.
Never use the product with defective guards or shields, or without safety devices in place.
To reduce the risk of injury associated with contacting rotating parts, always turn off the product and remove the battery pack. Make sure that all moving parts have come to a complete stop:
- before leaving the product unattended
- before clearing blockages
- before checking, cleaning, or working on the product
- before inspecting the product after striking a foreign object
- whenever the product starts to vibrate abnormally (inspect immediately)
Immediately turn off the product and remove the battery pack in the event of accident or breakdown. Do not operate the product again until it has been fully checked by an authorised service centre.
Do not modify the product in any way or use parts and accessories that are not recommended by the manufacturer.
If the product is dropped, suffers heavy impact, or begins to vibrate abnormally, immediately stop the product and inspect for damage or identify the cause of the vibration. Any damage should be properly repaired or replaced by an authorised centre.

Blower Safety Warnings

Wear a face filter mask in dusty conditions to reduce the risk of injury associated with the inhalation of dust.
Slightly dampen surfaces in dusty conditions.
Do not use the product near open windows.
Use the full blower nozzle extension so that the air stream can work close to the ground and perform effectively.
Do not point the blower nozzle in the direction of people or pets.
Never place objects inside the blower tubes.
Do not place the product on top of or near loose debris. Debris can be sucked into the intake vent, resulting in possible damage to the product.

Additional Battery Safety Warnings

To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse the tool, battery pack or charger in fluid or allow fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

Transportation and Storage

Turn off the product, remove the battery pack, and allow it to cool down before storing or transporting.
Remove all foreign materials from the product. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep the product away from corrosive agents, such as garden chemicals and de-icing salts. Do not store the product outdoors.
For transportation in a vehicle, secure the product against movement or falling to prevent injury to persons or damage to the product.

Transporting Lithium Batteries

Transport the battery pack in accordance with local and national provisions and regulations. Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport battery packs that are cracked or leaking. Check with the forwarding company for further advice.

Maintenance

Use only original manufacturer's replacement parts, accessories, and attachments. Failure to do so can cause possible injury, can contribute to poor performance, and may void your warranty.
Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. Have the product serviced by an authorised service centre only.
Check all nuts, bolts, and screws at frequent intervals for proper tightness to ensure that the product is in safe working condition. Any part that is damaged should be properly repaired or replaced by an authorised service centre.
Bring the product to an authorised service centre to replace damaged or unreadable labels.
You may make adjustments or repairs that are described in this manual. For other repairs, contact an authorised service centre.
After each use, clean the product with a soft, dry cloth.

Clearing a Blockage

To reduce the risk of injury associated with contacting moving parts, always turn off the product, remove the battery pack, and make sure that all moving parts have come to a complete stop.
Remove the blower tubes to inspect for blockage. Clear the tubes if required.
Reinstall the blower tubes before starting the product.

Know Your Product

Refer to page 6 for product identification:

Blower tube
On/off switch
Handle
Operator's manual
Battery pack
Charger

Symbols on the Product

[Information symbol] Read and understand all instructions before operating the product. Follow all warnings and safety instructions.
[Eye protection symbol] Beware of thrown or flying objects. Keep all bystanders, especially children, and pets, at least 15 m away from the operating area.
[Rotating fan symbol] Rotating fans. Keep hands and feet out of openings while the product is running.
[Ear protection symbol] Wear ear protection.
[Eye protection symbol] Wear eye protection.
[Rain/damp symbol] Do not expose the product to rain or damp condition.
CE: European Conformity Mark
UK CA: British Conformity Mark
EAC: EurAsian Conformity Mark
Ukraine Conformity Mark
[Sound level symbol] Guaranteed sound power level: 89 dB(A)
[Recycle symbol] Waste electrical products should not be disposed of with household waste. Recycle where facilities exist. Check with your local authority or retailer for recycling advice.

Symbols in this Manual

[Information symbol] Note
[Warning symbol] Warning
[Shopping cart symbol] Parts or accessories are sold separately

Product Specifications

Specification	Details
Cordless blower
Model	RY18BLA
Rated voltage	18 V d.c.
Average engine speed	17500 /min
Average air velocity	145 km/h
Average air volume	7.1 m³/min
Weight (Without battery pack)	2.1 kg
Weight (With heaviest battery pack)	3.3kg (9Ah battery)
Vibration level (in accordance with Annex BB of EN 50636-2-100:2014)
Total value a_h	3.4 m/s²
Uncertainty of measurement K_h	1.5 m/s²
Noise emission level (in accordance with Annex CC of EN 50636-2-100:2014)
A-weighted sound pressure level at operator's position L_pA	73.6 dB(A)
Uncertainty of measurement K_pA	3.0 dB
A-weighted sound power level L_wA	86.8 dB(A)
Uncertainty of measurement K_wA	1.7 dB
L_wA + K_wA	89 dB(A)

Battery and Charger

Specification	RY18BLA-0	RY18BLA-140
Model	-	-
Battery pack	-	RB18L40
Charger	-	RC18115
Compatible battery pack	RB18..	RB18..
Compatible charger	RC18.., BCL1418.., BCS618	RC18.., BCL1418.., BCS618

Warning: The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure. The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may significantly increase the exposure levels over the total working period. An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle. These conditions may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organising work patterns.

RYOBI® Warranty Application Conditions

This product is covered by a 24-month warranty for consumers, commencing on the date of purchase, documented by an invoice or proof of purchase. The warranty is for consumer and private use only; professional or commercial use is not covered. An extended warranty may be available by registering online at www.ryobitools.eu within 30 days of purchase.

The warranty covers defects in workmanship or material. It is limited to repair and/or replacement and does not cover incidental or consequential damages. The warranty is void if the product is misused, not used according to the manual, incorrectly connected, or if maintenance is improper, the product is altered, identification markings are defaced, or repairs are attempted by non-authorised centres.

Specific exclusions include damage from improper maintenance, alterations, defaced markings, misuse, incorrect power supply, inappropriate fuel mixtures, external influences (water, chemicals, shocks), foreign substances, normal wear and tear, overloading, use of non-approved accessories, periodic adjustments, and components subject to natural wear and tear (e.g., blades, belts, brushes, tubes, etc.).

For servicing, the product must be sent or presented to an authorised RYOBI service station. For issues, contact local authorised service centres or Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany, providing serial number and product type.

This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. For other areas, contact an authorised RYOBI dealer.

Declarations of Conformity

EC Declaration of Conformity

Manufacturer: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

Declares under sole responsibility that the product (Cordless blower, Brand: RYOBI, Model: RY18BLA, Serial number range: 47570701000001-47570701999999) fulfills relevant provisions of European Directives and harmonized standards including 2006/42/EC, 2014/30/EU, 2000/14/EC, 2005/88/EC, 2011/65/EU, and various EN standards (e.g., EN 60335-1, EN 50636-2-100, EN 55014-1, EN 55014-2, EN IEC 63000, EN ISO 12100).

Measured sound power level: 86.8 dB(A). Guaranteed sound power level: 89 dB(A).

Signed by Todd Chipner, Vice President, Quality - Ryobi Asia, and Alexander Krug, Managing Director, Techtronic Industries GmbH.

GB Declaration of Conformity