VEVOR SMART1 Desktop Vinyl Cutter

About This Product

VEVOR is committed to providing tools at competitive prices. Phrases like "Save Half" or "Half Price" are estimates of potential savings compared to major top brands and may not apply to all product categories. Please verify savings at the time of purchase.

Product Overview

The VEVOR SMART1 is a desktop vinyl cutter designed for creating customized designs. This manual provides instructions for its safe operation, assembly, software installation, and usage.

Contents

• Basic Safety Rules
• Matters Needing Attention
• Introduction to Main Parts
• Technical Parameters
• Product Assembly Steps
• Software Installation
• Software Function Description
• Software Output Cutting
• APP Installation and Use
• Frequently Asked Questions
• FCC Information
• Correct Disposal

I. Basic Safety Rules

WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this appliance. Failure to follow instructions may result in electric shock, fire, and/or serious injury.

• Remove protective material before turning on the cutting plotter.
• Ensure the plotter's rated voltage matches your power source.
• Turn off the power switch before plugging in the power supply.
• Do not operate with damaged cords or plugs. Return for examination or repair.
• If the supply cord is damaged, it must be replaced by the manufacturer or service agent.
• Avoid touching the power cord with wet hands.
• Use only the provided power cord, data cable, or approved replacements.
• Indoor use only.
• Do not drop metal objects or liquids into the machine.
• Wait 5 seconds after shutting down before turning the plotter on again to prevent damage.
• In thunderstorms, turn off the power switch and unplug the cord.
• Do not privately change manufacturer components.
• The manufacturer reserves the right to change specifications without prior notice.
• The manufacturer is only liable for product defects, not other losses caused by malfunctions.
• No part of this manual may be copied or transmitted without company permission.
• Do NOT drag the carriage by hand.
• If abnormal sound occurs after powering on, turn off immediately and contact after-sales support.
• This appliance can be used by children aged 8 and above, and persons with reduced capabilities, if supervised or instructed on safe use and aware of hazards. Children should not play with the appliance. Cleaning and maintenance by children require supervision.
• Close supervision is necessary when used by or near children.
• Do not immerse cords, plugs, or appliances in water or other liquids.
• WARNING: Blade is very sharp. Do not touch the blade directly with your hand to avoid injury and blunting. Hold the arbor when removing the blade.

II. Matters Needing Attention

Follow instructions marked with indicators for correct operation and to prevent damage.

Safe Use Methods

• Warning: Improper operation can result in injuries.
• Caution: Improper operation may cause damage to the machine.
• Attention: Improper operation may result in personal injury or damage to other objects.

Symbol Description

• Attention Symbol (?): Indicates users need to pay close attention.
• Electric Shock Symbol (⚡): Beware of electric shock.
• Do not use unqualified power supply (⚡): Using an unqualified power supply can cause fire or electric shock.
• Abnormal behavior (?): If the machine emits smoke, unusual odors, noise, or exhibits other abnormal behavior, power it off immediately. Continued use can lead to fire or electric shock.
• Unplugging power cord (?): Do not plug or unplug the power cord while the power is on. This can damage the machine.
• Grounding (⏚): Ensure the machine is properly grounded to prevent electrical shock or mechanical failure.
• Disassembly (?): Do not disassemble, repair, or modify the machine. This can result in fire, electric shock, or personal injury.
• Liquid contact (?): The machine should not come into contact with liquids.
• Metal objects (?): Do not drop metal objects into the machine.
• Power cord care (〰️): Do not damage or replace the original power cord. Avoid excessive bending, pulling, tying, or placing heavy objects on it.
• Long-term storage (⏳): If the cutting plotter will not be used for a long time, unplug the power cord from the socket to prevent fire.
• Reel operation (✋): When operating, do not put hands on the reel to avoid injury.
• Stable surface (⚖️): The machine should be positioned on a stable surface to prevent toppling and injury.
• Pulling plug (?): When disconnecting the power cord, pull the plug, not the cable, to avoid electric shock or fire.
• Thunderstorms (⛈️): Using the machine during thunderstorms and lightning is prohibited to prevent lightning damage.
• Power supply check (⚡): Before inserting the power plug, check if the power supply voltage and power cable are normal.

III. Introduction for Main Parts

The VEVOR SMART1 features several key components:

• 1. Cover plate
• 2. Storage cup
• 3. Carriage
• 4. Button panel
• 5. Paper roller
• 6. Clamp R
• 7. Clamp L
• 8. Cutting platform
• 9. Storage box
• 10. U-DISK port
• 11. USB Type-B port
• 12. DC 24V power input
• 13. Indicator light
• 14. Power button
• 15. Start button
• 16. Pause button
• 17. Load/unload button

Indicator Light Status

• White: Normal operation
• Blue: Bluetooth connected
• Red: Machine fault

IV. Technical Parameters

V. Product Assembly Steps

1. Ensure at least 20 inches of clear space around the machine before and after.
2. Open Clamp L and Clamp R by moving them as indicated.
3. Place the blade and housing into Clamp R. For foil transfer, place the pen or foil transfer and housing into Clamp L. Note: Never place the blade and housing in Clamp L.
4. Warning: Do not touch the blade tip with fingers to avoid injury and blunting.
5. Connect the USB cable from the SMART1 to your computer.
6. Plug in the power supply. Attention: Verify the machine's adapter voltage and current match your location before powering on to prevent hazards.
7. Press the power-on button. The machine will automatically reset.
8. Remove the cutting pad and peel off the white protective film.
9. Align the material to be cut with the upper left corner of the cutting pad grid, ensuring the cutting surface faces upwards, and paste it onto the cutting pad.
10. Place the material on the mat within the grid. Position the mat under the mat guides, ensuring the top edge is slightly clamped by both rollers simultaneously.

VI. Software Installation

1. Download the appropriate software version from https://get.exact-cut.com/.
2. Locate the software PSN code sticker in the accessory box before installation.
3. Enter the provided link in your browser to access the registration screen.
4. Click 'Register' after entering your registration information.
5. Enter the PSN code from the sticker.
6. Download the software version compatible with your computer system (Windows or Mac).
7. Double-click the downloaded installation package.
8. Follow the on-screen prompts to install the program: Agree to the license agreement, click 'Next', click 'Install'.
9. After installation, enter your email address to log in to your account.
10. Upon successful login, close the dialog box.

Download Links

Note: A Cutter Serial Number cannot be used to install the software.

VII. Software Function Description

The ExactCut software provides a comprehensive interface for designing and cutting.

Main Interface

The software includes a menu bar, common options toolbar, left and right toolbars, and a canvas editing area.

Module Description

• Menu Bar: Features File, View, Edit, Arrange, License, and Help options.
• Common Options Toolbar: Includes tools for file creation, opening, saving, importing, cutting, copying, pasting, deleting, duplicating, undo/redo, and zooming.
• Left Toolbar: Contains Object Mode, Node Edit, Freehand Sketch, Zoom mode, Create Square, Simple Text, Release Paths, and Select this Color tools.
• Right Toolbar: Houses Page Size, Colors, Size/Position, Device Settings, Contour, Clipart, and Layers options.
• Canvas Interface: The main editing area where designs are created or imported.

VIII. Software Output Cutting

1. Normal Cutting Output

1. Connect the machine to your computer using the USB cable.
2. Open the ExactCut software and verify the machine connection.
3. Create graphics within the software or import supported file formats (SVG, PNG, JPG).
4. Selected shapes can be edited for size, rotation, etc.
5. Set up the cutting mat in the software, choosing the appropriate size.
6. Tip: Cutting mats are recommended for most materials, especially adhesive-backed rolls or single-layer materials.
7. Configure cutting settings, including the cutting tool (default is Clamp R).
8. Adjust the position of the graphic on the canvas as needed.
9. Select the appropriate material from the material library.
10. Note: If your material is not listed, you can add it by inputting the name, setting speed and pressure, and accepting the changes.
11. Click 'Send to Cutter'.
12. Place the material on the cutting mat, align it within the grid, position the mat under the guides, and ensure it's secured by both rollers.
13. Press the 'LOAD' button on the machine when the material is ready.
14. Press the 'START' button on the machine to begin cutting.
15. When processing is complete, the software will prompt you to press the 'LOAD/UNLOAD' button.
16. Press the 'LOAD/UNLOAD' button on the machine.
17. Cutting is complete.

2. Contour Output Cutting

1. Create or import graphics into the software.
2. Select the graphic and use the contour function to create an outline.
3. Click 'Apply' to confirm the outline.
4. Note: Enable the "skeleton" checkbox if you need to cut internal parts of the graphic.
5. Click 'Send to Device'.
6. Select a printer to print the designed graphic.
7. Attach the printed graphic to the cutting mat, aligning it with the placement marks.
8. In the software, select the cutting contour option.
9. Click 'Send'.
10. Follow software instructions to locate and press the 'START' button on the machine.
11. Place the mat with the adhered material on the edge of the press wheel.
12. Press the 'LOAD' button when the material is ready.
13. Press the 'START' button on the machine to begin cutting.
14. When processing is complete, the software prompts you to press the 'LOAD/UNLOAD' button.
15. Press the 'LOAD/UNLOAD' button on the machine.
16. Contour cutting is complete.

IX. APP Installation and Use

Pair your machine with mobile devices via Bluetooth. Ensure the SMART1 is powered on and within 15 feet.

1. Software Download

Download the APP software from: http://api.cutterplotter.cn/index/d

2. App Usage

1. Open the app and register for an account, then log in.
2. Create a new account by entering your email, getting a verification code, setting a password, selecting your country, and agreeing to the terms. Click 'Create NEW ID'.
3. Sign in with your registered account details.
4. Turn on your device's Bluetooth.
5. Navigate to the home page and click 'Profile'.
6. Click 'Machine Setting'.
7. Allow location access when prompted.
8. Click 'Add' to pair a new device.
9. Click 'Pair Devices'.
10. Select the SMART1 cutter from the list of available devices (e.g., Smart_4F1E).
11. Connection successful. Click back.
12. Click 'Home'.
13. Select a graphic from the gallery or create a new one.
14. Edit graphics on the canvas. Click 'Make'.
15. Confirm editing and tap 'Make'.
16. Select the cutting mat and click 'Next'.
17. Select materials and click 'Next'.
18. Adjust the cutting position by moving the graphic on the screen.
19. Tap 'Make' to proceed.
20. Press the 'LOAD' button when the material is ready.
21. Press the machine's 'START' button.
22. When processing is complete, the software prompts you to press the eject button.
23. Press the machine's 'LOAD/UNLOAD' button.
24. Cutting is complete.

X. Frequently Asked Questions

• Q: Software shuts down or gets stuck during cutting?
  A: Click "Force Abort" in the software.
• Q: Blade no longer cuts through material?
  A: The blade tip is dull and needs replacement.
• Q: Deviation in contour cutting?
  A: Perform automatic calibration following the on-screen instructions.
• Q: How to switch software language?
  A: Go to Preferences > Language and select your desired language (English, Chinese, German, Spanish, Portuguese).
• Q: How to change measuring units?
  A: Go to Preferences > Measuring Units and select Inches or Metric (mm/cm).
• Q: How to cut in layers in the APP?
  A: Use the 'Layer' option in the app's editing tools.
• Q: How to switch left and right knives in the APP?
  A: Adjust settings within the app's machine configuration.
• Q: Material not recognized in the APP's library?
  A: Add the material to the library via the Material Library page, setting the appropriate pressure.
• Q: How to adjust pressure?
  A: Adjust the pressure settings within the material library or cutting parameters.
• Q: USB flash disk not recognized?
  A: Ensure the USB flash disk is formatted as FAT or FAT32. Unsupported formats include NTFS and exFAT.

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This product may cause harmful interference. (2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Unauthorized changes may void the user's authority to operate the product.

This product has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. If interference occurs, try reorienting the antenna, increasing distance, connecting to a different circuit, or consulting a technician.

Correct Disposal

This product is subject to European Directive 2012/19/EC. The crossed-out wheelie bin symbol indicates that the product requires separate collection for electrical and electronic devices. Do not discard with normal domestic waste. Take it to an authorized collection point for recycling.