Philips Pluto Air Purifier Quick Start Guide
Control
Functions:
- Mode switch/Filter reset
- Power on/off
Modes: Auto, Turbo, Sleep
Diagram Description: The control interface features a central circular button, indicated with a power symbol [power/mode/reset button]. This button is used for power on/off functions and for switching between operating modes (Auto, Turbo, Sleep) and resetting the filter indicator.
Display
Air Quality Indicator Light:
- Good: Blue
- Fair: Purple
- Poor: Red
- Very Poor: Dark Red
Filter Replacement Alert: [filter replacement icon]
Diagram Description: The device features a circular display that shows the air quality level through colored lights. Below this, an indicator signals when the filter needs replacement. The air purifier unit is depicted with these display elements.
Maintenance
Clean the surface of the filter
Clean the surface of the filter every 4 weeks.
Diagram Description: An illustration shows how to remove the filter from the air purifier and clean its outer surface, likely using a soft brush or vacuum attachment.
Replace filter when display shows [filter replacement icon]
Replace with the NanoProtect Filter Series 2 (Models: AC0819/AC0820 with filter FY0194, AC0830 with filter FY0293).
After replacing the filter, press and hold the [power/mode/reset button] for 3 seconds to reset the filter replacement indicator.
Diagram Description: An illustration demonstrates the procedure for removing the old air filter and inserting a new NanoProtect filter into the unit.
Note on Filter Odor: If the filter develops a slight odor after prolonged use due to indoor air absorption, remove it. Place the filter in an area with direct sunlight and good ventilation for several hours. Reinstall the filter and test the unit. If the odor persists, replace the filter.
Product Identifier/Part Number: 3000 060 99131
