iPega P5 VR 2 Dual Charging Stand

Support and Contact

[QR Code: Follow ipega WeChat Official Account]

[QR Code: Join Official Technical Support WeChat Group]

Customer Service Phone: 0755-2791 8998

Online Hours: Monday to Friday 9:30-17:30

Product Overview

This document provides instructions and specifications for the ipega P5 VR 2 Dual Charging Stand (Model PG-P5V001).

Product Illustration

The diagram illustrates the components and features of the charging stand:

• VR headset hanger: A support at the top for placing the VR headset.
• VR headset stand: The main structure supporting the headset.
• VR controller charging indicator: Lights indicating the charging status of the VR controllers.
• VR controller charging port: Two ports designed for charging VR controllers using magnetic adapters.
• Light bar: An illuminated strip on the front of the base.
• Alternative charging port: An additional port for charging controllers.
• USB port: A port on the base for data transmission.
• AC power port: The input for the power supply.
• Charging on/off switch: A switch to control the charging circuit.
• Light on/off switch: A switch to control the light bar.

Product Description

• This product can be used for storage of VR headset, VR controller, and headset.
• Charge for 2 PS VR2 controllers simultaneously.
• Magnetic charging, convenient and fast.
• With 1 USB data expansion port.
• Dazzling RGB light effect.

Specifications

Assembly Instructions

Follow these steps to assemble the charging stand:

The diagram shows three main assembly steps:

1. [Step 1] Start with the base unit.
2. [Step 2] Insert the vertical pole into the designated slot on the base.
3. [Step 3] Attach the VR headset hanger to the top of the vertical pole.

The final assembled product is depicted to the right.

Product Instructions

1. After assembly, place the VR headset on the hanger. Install the VR controllers into the magnetic charging adapters and then place them into the charging ports on the base.
2. Connect the product to your console using the provided USB cable. Upon powering on, the charging indicator light will turn blue. During charging, the indicator light turns orange, and it turns blue again when fully charged. The charging switch located on the back of the base can be used to turn the charging circuit on or off (this also controls the charging indicator light but does not affect the light bar). Once charging is complete, you can turn off the charging function.
3. The light bar features 10 different lighting effects, controlled by the light effect switch button.
   • Default light effect: Gradient.
   • Lighting Effects List: 1. Gradient, 2. Flashing, 3. Red, 4. Green, 5. Blue, 6. Yellow, 7. Cyan, 8. Purple, 9. White, 10. Off.
   • (Flash definition: A rapid cycle through red, green, blue, yellow, cyan, purple, and white, with one color displayed per second.)
   • *When the power is turned off, the current lighting effect setting will be saved.
   • *Lighting effect switch operation:
     • Short press the light effect switch to cycle through and change the lighting effect.
     • Press and hold the switch for 3 seconds to turn off the light effect and save the current setting.
     • A subsequent short press of the switch will turn the light effect back on, restoring the saved setting.
4. The base includes a USB2.0 port primarily for data transmission. When connected to a P5 console, this port enables the console's functions. It cannot be used as a charging port.

Notes

• Please do not store this product in wet or high-temperature areas.
• Do not knock, beat, drub, pierce, or attempt to disassemble this product to avoid unnecessary damage.
• Keep the product away from fire or heating sources while charging the controllers.
• Non-professional personnel should not disassemble the product, as this will void the after-sales warranty service.

Product List

• [Charging Stand] x1
• [Manual] x1
• [Charging Adapter] x4
• [Type-C Cable] x1