Orbegozo WF 0250 Wall Fan

Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Orbegozo WF 0250 wall fan. Please read it carefully before use and keep it for future reference.

Model: WF 0250

Manufacturer: Sonifer, S.A.

Address: Avenida de Santiago, 86, 30007 Murcia, España

Contact: E-mail: sonifer@sonifer.es / Web: www.orbegozo.com

Origin: Made in P.R.C.

Safety Instructions

Read all safety instructions before operating the appliance. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction on safe use and understand the hazards involved. Children must never play with the appliance. Cleaning and user maintenance must never be carried out by children without supervision.

• Supervise children to ensure they do not play with the appliance.
• Keep the appliance and its cable out of reach of children under 8 years old.
• WARNING: For children's safety, keep packaging materials (plastic bags, boxes, polystyrene etc.) out of their reach.
• If the supply cord is damaged, it must be repaired by the manufacturer, authorized service agent, or a qualified professional.
• Never unplug by pulling the cord.
• Do not operate if the cord or plug is damaged or if the appliance is not working correctly.
• Do not handle the appliance with wet hands.
• Never immerse the appliance in water or any other liquid.
• Before cleaning, ensure the appliance is unplugged.
• This appliance must be installed according to national regulations for electrical installations.
• This appliance is for household use only.
• WARNING: In case of misuse, there is a risk of possible injury.
• Never insert fingers, pencils, or any other object through the grille when the fan is running.
• Disconnect the plug when moving the appliance from one location to another.
• DO NOT USE the fan in a window. Rain may create an electrical hazard. Do not leave the fan operating near areas where water has collected.
• Keep the fan away from humidity, chemical articles, and oil.
• Avoid contacting moving parts.
• Do not let the cord hang over the edge of tables or counters, or touch hot surfaces.
• During cleaning, avoid splashing water and do not use oil, alcohol, or chemical articles that could deform the fan body or cause electrical hazards.
• Keep the fan away from curtains, clothing, or other items that could interfere with its operation.
• Turn off all switches and unplug the appliance if you will not be using it for an extended period.
• Never use the fan before finishing assembly to avoid injuries.
• Disconnect the plug when removing guards for cleaning.

Parts Description

The following diagram illustrates the components of the Orbegozo WF 0250 wall fan:

Note: The diagram shows an exploded view of the fan components.

Assembly and Installation

How to Fix the Fan

1. Present the metallic mounting plate on the wall.
2. Attach the accessory metallic supporting tab to the wall using the provided anchor screws.
3. Mount the fan by sliding it onto the tab, aligning the opening on the bottom of the control box with the tab. The fan should be mounted at a height of approximately 2.3 meters from the floor.

Assembly of the Rear Grille

1. Fix the rear grille to the motor using the locking nut.
2. Attach the grille joining ring to the rear grille by inserting the edge of the rear grille into the ring's groove.
3. Tighten the screw partially to avoid unnecessary movement while assembling the fan blades.

Assembly of the Fan Blade

1. Insert the fan blade onto the motor shaft, aligning the motor shaft's pin with the slot on the back of the blade.
2. Fasten the blade with the blade fixing nut.

Assembly of the Front Grille

1. Attach the circumference of the front grille inside the other groove of the covering ring.
2. Finally, tighten and secure the covering ring screw.

Operation and Use

This fan can be controlled via the remote control or manually using the control panel buttons.

Using the Remote Control

• Select the desired function using the remote control buttons. The remote requires two AAA batteries.

Manual Control (Control Panel)

• To turn on the fan and set the lowest speed, use the ON/SPEED button.
• To change speed, press the ON/SPEED button again to cycle through low, medium, and high speeds.
• To select oscillation mode, press the OSC button once the fan is on.
• The timer can be programmed for operating times from 0.5 to 7.5 hours using the TIMER button. Each press advances the timer by 30-minute increments.
• To select operating mode (e.g., NORMAL, NATURE, SLEEP), press the MODE button.
• To turn off the fan, press the OFF button.

Indications

• The fan can tilt upwards and downwards by turning and loosening the joint knob. Ensure this knob is re-secured after adjusting the tilt.
• To operate the fan and increase speed, use the right handle.
• To turn off or decrease speed, use the left handle.

Care, Cleaning & Storage

• For optimal performance, the fan blades and grilles should be cleaned regularly.
• Unplug the fan and reverse the assembly procedure to remove parts before cleaning.
• Clean with a damp cloth and dry with a towel.
• Never immerse any fan component in water. Clean only with a damp cloth and dry immediately.
• Always store the fan in a cool, dry location.

Disposal of Old Electrical Appliances

This appliance is subject to European Directive 2002/96/EC concerning Waste Electrical and Electronic Equipment (WEEE). Old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. They must be collected separately to optimize recovery and recycling of materials, reducing impact on health and the environment. The symbol of a crossed-out wheeled bin ?️❌ indicates this obligation for separate collection.

Consumers should contact their local authority or retailer for information on the correct disposal of their old appliance.