LIVARNO home LED Night Light

Model: 10736LD/G06132.C | IAN: 480732_2410

Introduction

Congratulations on your purchase of this high-quality product. This user manual is part of the product and contains important information for safety, use, and disposal. Please read all operating and safety instructions carefully before using the product. Use the product only as described and for the intended applications. Include all documentation when passing the product on to a third party.

Legend of Pictograms

?: Read instructions!
V~: Volt (AC)
V=--: Volt (DC)
W: Watt (active power)
Hz: Hertz (frequency)
[Square symbol]: Protection class II
? [IP20]: This product is suitable for indoor use only, in dry and enclosed rooms.
⚠️: Observe warnings and safety instructions!
⚡: Warning! Danger of electric shock!
t_a 35°C: Maximum ambient temperature 35 °C
♻️ [a, b]: Dispose of packaging and device environmentally friendly!
[Grey square]: Safety instructions, operating instructions.

Product Diagram

The diagram shows the LED night light with the following numbered parts:

1. Slider switch: Controls the ON/OFF/AUTO modes.
2. Sensor: Detects ambient light levels for automatic operation.
3. USB Ports: Two ports for charging mobile devices (5.0V DC Max. 3.4A total).
4. LED Ring: Provides illumination.

Intended Use

This LED night light serves as an orientation light. It also allows for charging mobile devices via the two USB ports. It is not intended for general room illumination or commercial use. The product is exclusively designed for indoor use in dry and enclosed rooms.

Parts Description

Refer to the diagram for numbered parts:

1. Slider switch: ON/OFF/AUTO
2. Sensor
3. USB Ports
4. LED Ring

Technical Data

Model/Type Number:	10736LD/G06132.C
Operating Voltage:	230V~, 50 Hz
Standby Consumption:	max. 0.35 W
USB Output Current:	5.0V=--, total max. 3.4A, max. 17.0W
Input Current:	230V~, 50 Hz
Average Active Efficiency:	84.32%
Efficiency at low load (10%):	80.37%
Idle Current Consumption:	0.09 W
LED:	3 x LED (non-replaceable)
Protection Class:	[Square symbol] (Class II)

Package Contents

1 LED night light
1 User manual

Safety Instructions

KEEP ALL SAFETY AND OPERATING INSTRUCTIONS FOR FUTURE REFERENCE!

This device can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, if they are supervised or have been instructed on safe use and understand the resulting hazards. Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.

⚠️ CAUTION! RISK OF INJURY! Do not use the device if any damage is found.

Do not expose the device to extreme temperatures or strong mechanical stress. Otherwise, the product may deform.

Unplug the product from the power outlet when not in use.

Never cover the LED night light when it is switched on.

⚡ DANGER OF ELECTROCUTION! Before using the device, ensure that the mains voltage matches the required operating voltage of the device (230V~).

⚡ CAUTION! RISK OF ELECTRIC SHOCK! Do not operate the device if it is damaged. Damaged devices pose a risk of death from electric shock! Regularly check the device and before each use for damage to the housing and plug.

This item contains no user-serviceable parts. The light sources cannot be replaced. If the light sources reach the end of their service life, the entire device must be replaced.

Never open electrical components or insert any objects into them.

Keep the product away from moisture.

Operation

Using the LED Night Light

Plug the LED night light into a properly installed wall socket.

Slide the slider switch 1 to the desired position (see diagram). The following functions are available:

Position AUTO: The LED night light turns on when the sensor detects darkness. It turns off again when brightness is detected.
Position ON: The LED night light is permanently on.
Position OFF: The LED night light is permanently off.

Charging Devices via USB Port

Plug a suitable USB plug into USB port 3.

When using multiple USB ports for charging, pay attention to the maximum output current (see "Technical Data").

Observe the manufacturer's recommendations regarding charging time and charging behavior of the connected device. When connecting multiple devices, the charging time may be extended according to the manufacturer's specifications for the devices.

Note: The USB charging port is not intended for data transfer.

Cleaning and Care

⚡ CAUTION! RISK OF ELECTRIC SHOCK! First, unplug the LED night light from the power socket.

⚡ CAUTION! RISK OF ELECTRIC SHOCK! For electrical safety reasons, the device must never be cleaned with water or other liquids, or immersed in water.

Use only a dry, lint-free cloth for cleaning.

Disposal

The packaging is made of environmentally friendly materials that can be disposed of at local recycling points.

When sorting waste, pay attention to the labeling of packaging materials, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1-7: Plastics / 20-22: Paper and cardboard / 80-98: Composite materials.

Information on how to dispose of the used product can be obtained from your local municipality or city administration.

Do not dispose of your product in household waste when it has reached the end of its service life; instead, have it disposed of properly. You can obtain information about collection points and their opening hours from the relevant authority.

Electrical waste must not be disposed of in household waste bins. It can be taken to specially designated places, e.g., Selective Waste Collection Points or retail outlets selling electronic equipment.

Follow the applicable regulations in Poland concerning the selective collection of electrical and electronic equipment. Used equipment may have harmful effects on the environment and human health due to the potential content of hazardous substances, mixtures, and components. Households play an important role in contributing to the reuse and recovery of secondary raw materials, including the recycling of used equipment. At this stage, attitudes are shaped that influence the preservation of the common good, which is a clean natural environment.

Warranty and Service

Note: This product comes with a 36-month warranty from the date of purchase. The product has been carefully manufactured and thoroughly inspected before shipping. Nevertheless, if production or material defects occur during the warranty period, contact the seller immediately.

Damage caused by improper handling, failure to follow the operating instructions, or intervention by unauthorized persons is excluded from the warranty. Most malfunctions are caused by incorrect operation. Therefore, if a malfunction occurs, first consult the operating instructions.

Contact the service center of Uni-Elektra GmbH before any potential returns. The product will only be accepted after consultation. Unpaid shipments will not be accepted. Warranty service does not renew or extend the 36-month warranty period.

According to the Civil Code Art. 581 §1, the warranty period restarts with the replacement of the device or a significant component.

Service Address

Uni-Elektra GmbH
Hummelbergstr. 6
72184 Eutingen im Gäu
GERMANY

Tel.: 00800 888 11 333

Email: uni-service-PL@sertronics.de

For all inquiries, please have your receipt and article number (IAN 480732_2410) ready as proof of purchase.

Manufacturer