LIVARNO home LED Desk Lamp

Introduction

Congratulations on the purchase of your new product. You have chosen a high-quality product. Please read all instructions for use carefully. Fold out the page with the diagrams; these instructions are part of the product and contain important information on setup and operation. Always observe all safety instructions. Before using this product for the first time, verify that the correct voltage is present and that all parts are properly installed. If you have any questions or are unsure about operating the product, please contact your retailer or the service centre. Keep these instructions in a safe place and include them when passing this product on to others.

Intended Use

This lamp is only suitable for indoor use in dry and enclosed spaces. This product is only intended for private household use.

Delivery Contents

Always check that all parts are present and that the product is in perfect condition immediately after unpacking.

• 1 LED desk lamp
• 1 USB connection cable
• 1 Mains adapter
• 1 Set of operating instructions

Parts Description

The components of the LED Desk Lamp are:

1. Lamp head
2. Lamp arm
3. Lamp base
4. Touch button
5. Colour change ring
6. RGB light
7. USB connection cable
8. Mains adapter

Technical Data

• Model number: 55458
• Mains adapter supply voltage: 100-240V~, 50/60Hz
• Protection class (adapter): ?️ II /
• Lamp supply voltage: 5V ⎓
• Output: 5W
• Protection class (lamp): ?️ III /
• Max. height: 48 cm
• Base diameter: 13 cm
• USB connection cable length: 150 cm

Safety Notes

Damage due to failure to comply with these operating instructions will void the warranty! No liability is assumed for consequential damage, property damage, or personal injury due to improper handling or failure to observe safety instructions.

Initial Use

Checking the lamp and the delivery contents

Be careful when opening the packaging:

1. Remove the lamp from the packaging.
2. Check that all items included in the delivery contents are present (refer to diagram).
3. Remove all packaging material.
4. Check the lamp or individual parts for visible damage. Do not use the lamp if any damage is detected. Contact the manufacturer using the service address provided.

Operation

Setting up the lamp

1. Place the lamp on a level, stable surface.
2. Adjust the lamp head 1 to the desired position.
3. Plug the USB connection cable 7 into the mains adapter 8 and plug the mains adapter 8 into a properly installed socket, or plug the USB connection cable 7 into a device with a USB port.

Switching the lamp on/off and dimming

Tap the touch button 4 on the lamp to switch it on or off. Press and hold the touch button 4 for a longer duration to dim the light to any of the 3 settings (dimmed low, medium dimmed, not dimmed).

Switching the colour change on/off

You can switch the RGB light 6 on and off independently from the lamp.

Tap the symbol ℹ️ to switch the RGB light 6 on and off. Swipe your finger along the colour change ring 5 on the lamp base 3 to select a colour. Pressing the symbol ℹ️ for a longer duration can start an automatic colour change function.

Cleaning

Storage

All parts must be completely dry before storage.

• Always store the lamp in a dry location.
• Protect the lamp from direct sunlight.
• Store the lamp out of reach of children, locked securely, and at a storage temperature between +5°C and +20°C (room temperature).
• Place the lamp in the original packaging or a box of the same size.

Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with the following meaning: 1-7: plastics / 20-22: paper and fibreboard / 80-98: composite materials. The product and packaging materials are recyclable; dispose of them separately for better waste treatment. The Triman logo is valid only for France. Contact your local refuse disposal authority for more details on how to dispose of your worn-out product. To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

Warranty and Service

Warranty

A 3-year warranty is provided from the date of purchase. Products are manufactured using modern production methods and undergo precise quality control. Defects in material or manufacture will be replaced free of charge during the warranty period. In the event of an unexpected defect, please return the carefully packaged product to the service address specified. The warranty does not cover damage due to improper operation, or wear parts and consumables. These can be ordered at cost via the telephone number provided. Repairs not covered by the warranty (e.g., light bulbs) may also be requested at cost price from the service address. The product will be repaired at the specified service location. Timely processing and returns are ensured by sending the product directly to this address.

Service Address

Great Britain / Ireland / Northern Ireland
EGLO UK Ltd.
Unit 12 Cirrus Park
Lower Farm Road
Moulton Park Industrial Estate
Northampton, NN3 6UR, GREAT BRITAIN
T: +44 1604 790 986
E: info-greatbritain@eglo.com

Cyprus
Pierides Electrical Ltd.
AY. Athanasios Industrial Area
4. Falea Street
3507 Limassol, CYPRUS
T: +35-7258-111-33
E: pielec@spidernet.com.cy

For inquiries, please have your receipt and item number (e.g., IAN 123456_7890) ready as proof of purchase.

Declaration of Conformity

This product fulfils the requirements of applicable European and national directives. Conformity has been verified. The relevant declaration and documents are held by the manufacturer.

CE

Warranty Card

Fill out the warranty card for your records:

Return address:
Name / First name: _____________________________________________________
Country / Postal code / City / Street address: _____________________________________________________
Phone: _____________________________________________________
Item number / Description: _____________________________________________________
Purchase date / Point of purchase: _____________________________________________________
Description of the defect: _____________________________________________________
_____________________________________________________
Date / Signature: _____________________________________________________

Non-warranty cases:

☐ Please return the unrepaired item, carriage paid.

☐ Please provide pricing. Repair the product against charge.