Supersonic SC-6025QI Desktop Wireless Charger with Digital Alarm Clock

Product Overview

The Supersonic SC-6025QI is a versatile desktop device combining a digital alarm clock with a wireless charger.

Product Connection and Charging

Product Connection:

1. Plug the USB-A end of the provided cable into a QC3.0 or PD power adapter.
2. Plug the Type-C end of the cable into the product.
3. The product is ready and in standby mode once all indicators are on.

Light Modes:

• Power Connected: Blue light blinks twice.
• Standby: Light is off.
• Charging: Blue light is on.
• Charged: Light is off.
• Foreign body detected / metal (cannot charge): Blue light flashes.

Setting the Time

1. Short press the "M" button once to enter HOUR setting. The Hour will flash. Use the "+/-" buttons to adjust the Hour value. Press and hold "+/-" for continuous adjustment.
2. Short press the "M" button again to enter MINUTE setting. The Minute will flash. Use the "+/-" buttons to adjust the Minute value. Press and hold "+/-" for continuous adjustment.
3. Short press the "M" button once more to finish the Time setting.

Setting the Alarm

1. Long press the "+" button to turn Alarm 1 ON or OFF. Long press the "-" button to turn Alarm 2 ON or OFF. The corresponding alarm indicator will light up when the alarm is active.
2. Long press the "M" button to set the Hour for Alarm 1. The Hour will flash. Use "+/-" to adjust the Hour value.
3. Short press "M" to set the Minute for Alarm 1. The Minute will flash. Use "+/-" to adjust the Minute value.
4. Short press "M" to set the Hour for Alarm 2. The Hour will flash. Use "+/-" to adjust the Hour value.
5. Short press "M" to set the Minute for Alarm 2. The Minute will flash. Use "+/-" to adjust the Minute value.
6. Short press "M" to finish the Alarm setting.

Turn off Alarm or Snooze:

• The alarm sound is a buzzer. If no action is taken, it will automatically turn off after 3 minutes of ringing.
• To stop the current day's alarm, short press "M", "+", or "-" buttons.
• To turn off the alarm permanently, long press "+" for Alarm 1 or long press "-" for Alarm 2.
• Alternatively, press the "Snooze" button or tap the product to enter snooze mode. The alarm indicator will flash during snooze. Snooze intervals are 5 minutes with unlimited snoozes.

Setting the Display Brightness

The display has 4 brightness levels adjustable manually. Short press "+/-" to cycle through brightness settings: Max, Medium, Minimum, Off. The display defaults to Max brightness.

Setting the Calendar

1. Long press the "Snooze" button once to enter YEAR setting. The Year will flash. Use "+/-" to adjust the Year value.
2. Short press "Snooze" to enter MONTH setting. The Month will flash. Use "+/-" to adjust the Month value.
3. Short press "Snooze" to enter DAY setting. The Day will flash. Use "+/-" to adjust the Day value. The week will adjust automatically based on the Day.
4. In standby mode, short press "Snooze" to view the Calendar. It will automatically exit after 5 seconds.

Setting the Temperature

• The factory default is Fahrenheit.
• Double press the "Snooze" button to switch between Fahrenheit and Celsius.

Power Saving Function

• The built-in button battery serves as a time memory function.
• When the external power supply is unplugged, all functions become invalid. Functions return to normal when power is reconnected.

Wireless Charging

• Ensure your mobile phone is compatible with wireless charging.
• If your mobile phone has a metal case, remove it before placing it on the wireless charger.
• Place a compatible mobile phone directly onto the charging area. For optimal charging speed, try to center the phone.

Important Notices and Warnings

Attention: To ensure the alarm, wireless charging, and USB output function simultaneously, the power adapter must be QC2.0 or QC3.0. If connected to a 5V/2A adapter, only wireless charging and the alarm will function.

General Precautions:

• Do not squeeze or collide the product.
• Do not disassemble or expose to fire or water to prevent short-circuiting.
• Avoid using the wireless charger in environments with severe high temperature, humidity, or corrosive substances to prevent damage to circuits.
• Keep magnetic stripe cards (ID cards, bank cards, etc.) at a distance of more than 20cm from the implanted medical device (pacemaker, implantable cochlea, etc.) to avoid potential disruption to medical devices.
• Keep children away from the product to prevent them from treating it as a toy and causing accidents.
• Keep the wireless charger and receiver device away from water and other liquids.
• To clean the charger, ensure the power supply is disconnected.
• Usage temperature: 0-45°C.
• Usage humidity: 20-85% (non-condensing).

Warning: This product contains button batteries. If swallowed, it can cause serious or fatal injury within 2 hours. Keep batteries away from children. If you suspect a battery has been swallowed or placed inside the body, seek immediate medical attention.

* Illustrations in this manual are for reference only. The actual product may vary.

Package Contents: Alarm charger, charging cable (1M 5V 2A USB-A to Type-C), User Manual.

Note: A power adapter is not included. Please use your phone's original adapter or a QC2.0 or 3.0 power adapter.

Product Specifications

• Input: 5V/3A, 9V/3A, 12V/2A
• Wireless Output: 15W (MAX)
• USB-A Output: 5V/1A (Max)
• Charging Efficiency: 73%
• Charging Distance: ≤8mm
• Frequency: 110-205KHz
• Size: 141*125*70mm

Applicable Devices

Products qualified with the Qi standard.

Warranty

Supersonic Inc. ("Supersonic") warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) is required. Please visit https://www.supersonicinc.com/pages/warranty for additional information.