Supersonic SC-5032WKB User Manual

Precautions Before Use

• Avoid obstruction of the air inlet and outlet.
• The power indicator on the digital keyboard will remain lit after the power is turned on.
• The system will start up when it is used for the first time. Do not force power off to avoid data loss or damage to the system.

Descriptions

The device features the following components:

• 1. MIC [Microphone]
• 2. EarphoneJack [Earphone Jack]
• 3. USB [USB Port]
• 4. HDMI [HDMI Port]
• 5. USB-HOST [USB Host Port]
• 6. DC [DC Power Port]
• 7. TF card [TF Card Slot]
• 8. Loudspeaker [Loudspeaker]
• 9. Hinge port [Hinge Port]
• 10. Detachable [Detachable Connector]
• 11. Power button [Power Button]
• 12. Volume keys [Volume Keys]
• 13. Front Camera [Front Camera]
• 14. Touch Panel [Touch Panel]
• 15. Back Camera [Back Camera]
• 16. Small card cover [Card Cover]

General Precautions

Please follow these safety precautions when using your device:

• Do not use power cords, damaged plugs, or loose plugs. Do not bend or damage the power cord. Do not touch the power cord with wet hands or pull the cord to disconnect the charger.
• Do not use the device while it is charging or touch it with wet hands.
• Do not hit or drop the charger and do not charge the battery with chargers that are not approved by the manufacturer.
• Do not use your device during an electrical storm. Handle and discard batteries and chargers with care.
• Do not handle damaged lithium-ion batteries or those showing leakage.
• Do not use the device near a pacemaker. If possible, avoid using it at a distance inferior to 15 cm, as it can interfere with the pacemaker.
• Do not use the device in a hospital or near medical equipment that can be interfered by radio frequency. If you use medical equipment, ensure it is protected against radio frequencies. If you use a hearing aid, consult the manufacturer for information about interference.
• In potentially explosive environments, turn off the device.
• Always respect the rules, instructions, and warning signs.
• Do not use the device in or near other flammable chemicals refueling points (service stations) and/or explosives.
• Do not store or transport flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or accessories.
• To charge the device, ensure an easily accessible power outlet is installed.
• Images in this manual are for informational purposes only and may differ from the actual product.

The charging time is about 2-3 hours, and the battery life is about 3-4 hours for daily use.

For more information, visit http://www.supersonicinc.com/.

II. Setup Guide for the Keyboard & Case

Insert the tablet into the keyboard pogo-pin. If the Power Light is on, it means the keyboard is working.

The Tablet also supports an External Keyboard.

III. Introduction to Desktop

1. Windows 11 Startup Menu:

   On the start screen, you can see many application programs. Select the programs you need to open. You will need to log on to your Microsoft account for some application programs to run completely.

2. Introduction to App Interface:

   Besides the application programs already fixed on the start screen, you can also add and start other software application programs.

If you want to pin more application programs to the start interface, right-click the properties icon and select "Pin to Start" [Pin to Start].

Conversely, if you want to cancel or delete an application from the start screen, right-click the properties icon and select "Unpin from Start" [Unpin from Start].

4. Search Menu

Use the External Keyboard connected to your device and type in the Search box for Apps, Settings, Documents, photos, Music, WEB, etc.

VI. Basic Operations

1. Sleep, Restart, Power On and Power Off:

   On the start screen, you can find power options. Select 'Sleep' for the tablet to sleep; select 'Shut down' for the tablet to power off; select 'Restart' for the tablet to reboot.

   Other ways to power on/off:

   When your tablet is on, hold the power button for 3 seconds, then slide to shut down [Slide to Shut Down]. When your tablet is off, hold the power button for 3-4 seconds; it will power on.

2. Bluetooth Connect:

   Click the [Bluetooth Icon] to open Bluetooth. Click the [Settings Icon] and enter the setting interface, then click [Add device] [Add Device Button] to search for other devices.

3. Wi-Fi Connect:

   Click the [Wi-Fi Icon] to open Wi-Fi, then choose the Wi-Fi you need to connect and enter the password.

4. Display Brightness and Power Management:

   Display brightness: There are two ways to change brightness:

   • A. Click the [Brightness Icon] on the taskbar to switch the brightness.
   • B. Navigate to Settings > System > Display > Brightness.

   Power and Battery Management: Navigate to Settings > System > Power & battery.

5. Add an Account:

   Add a local account: Navigate to Settings > Accounts > Other users. Click "Add account" [Add Account Button] at "Add other user" [Add Other User Button].

   Add a Microsoft account: Navigate to Settings > Accounts > Email & accounts. Click "Add a Microsoft account" [Add Account Button] and fill in a Microsoft account following the prompts.

6. Adjust the Date and Time:

   Date and time: Navigate to Settings > Time & Language > Date & time. The "Set time automatically" [Set Time Automatically Toggle] option is on by default. The time will be set automatically when the Internet is connected via Wi-Fi. You can change the time zone through the “Time zone” [Time Zone Selector] option.

   If you need to set the time manually, turn off the "Set time automatically" [Set Time Automatically Toggle] option, and the "Change" [Change Button] option will become active.

   Region: Navigate to Settings > Time & Language > Language & Region.

7. Camera:

   On the start screen, get into ‘All apps’ [All Apps Button] and click ‘Camera’ [Camera App]. You can switch between front/rear cameras [Switch Camera Button], take video [Take Video Button], or take photos [Take Photo Button].

8. HDMI Connect:

   Connect the tablet and a display device using a MINI HDMI cable. Set up the project options following the guide. You can also open the project option by pressing 'Win+P' [Windows Logo + P] on the keyboard.

   Note: The display device and HDMI cable need to be purchased separately.

9. Reset the PC:

   Navigate to Settings > System > Recovery. Click "Reset PC" [Reset PC Button] and select your desired option. Then follow the guiding steps to reset your PC.

10. Troubleshoot:

    You can find troubleshooting tips in Settings > System > Troubleshoot [Troubleshoot Link].

IV. Specifications

Package contents: AC adapter [AC Adapter]; USB cable [USB Cable]; 2in1 Detachable Keyboard [2in1 Detachable Keyboard]; Manual [Manual].

Warranty

Basic Warranty Statement

Supersonic Inc. ("Supersonic") warrants this product to the original purchaser ONLY, to be free from defects in materials and workmanship under normal use, for ninety (90) DAYS from the date of original purchase. Proof of purchase (receipt) is required.

Please visit http://www.supersonicinc.com/warranty for additional information.

FCC Compliance and SAR Information

FCC ID: 2AC5R-SC-5032WKB

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Specific Absorption Rate (SAR) information:

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This device has also been tested against this SAR limit.

This device was tested for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0mm separation distance between the user's body and the back of this device. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.