ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

SHARPER IMAGE® PROFESSIONAL VIDEO DRONE

Item No. 204990

Quick Start Guide

NOTE: The Professional Video Drone is a sophisticated piece of equipment. It is recommended for those users who have prior experience flying RC drones and quadcopters. This Quick Start Guide will give you an idea of what is involved to get started with your drone. If you are new to this model, Sharper Image strongly recommends you start by reading the full User's Guide included in this package. Your safety and satisfaction are Sharper Image's prime concern.

STEP 1: CHARGE AND INSTALL THE DRONE BATTERY.

Connect the battery to the balance charger and the wall charger. The two LED lights will turn RED when charging and GREEN when fully charged. The charging time is about 180 minutes.
Diagram Description: An illustration shows the drone battery connected to a balance charger, which is then connected to a wall charger. The battery is labeled 'X4PRO'.
Place the battery into the battery compartment and connect the battery plug with the correct polarity. When the drone is powered on, the blue LEDs will blink in a rotating pattern.
Diagram Description: An illustration shows the drone with an arrow pointing to its battery compartment. An inset shows the battery being inserted into the compartment and the plug being connected.

STEP 2: PREPARE THE CAMERA.

Insert a Micro SD card (not included) into the camera. This camera supports Class 4 to Class 6 cards, from 4GB to 32GB capacity.
Insert the rechargeable battery into the camera.
Charge the camera by connecting the charging cable and plugging it into a USB port.
Attach the camera onto the gimbal. Power on the camera. Users can press the buttons on the camera to shoot pictures and videos. Users can also use the transmitter to control the camera and play back videos.

STEP 3: ATTACH THE GIMBAL TO THE DRONE.

Carefully position the gimbal at the bottom slot with shock resistance equipment slot and slip it into the bottom of the frame.
Insert the gimbal signal wire into the slot on the gimbal.
Insert the camera image transmission wire into the left slot.
Connect the power plug.
Diagram Description: An illustration shows the underside of the drone and the gimbal. Arrows indicate how the gimbal slots into the drone's frame. Detailed callouts show where to connect the gimbal signal wire, camera image transmission wire, and gimbal power wire.

STEP 4. CALIBRATE THE GIMBAL.

Keep the drone on a level surface and do not move it.
The gimbal will enter calibration mode automatically and finish calibrating in 60 seconds.
Diagram Description: Three sequential illustrations show the drone on a flat surface, emphasizing that it should remain still during calibration.

STEP 5. INSTALL THE PROPELLERS.

Take out the four propellers and install them on the corresponding motor shafts.
There are 2 types of propellers, “A” and “B.” Be sure each propeller is on the correct shaft.
Lock rotors in place by twisting them gently in a clockwise direction.
NOTE: These propellers are sharp. Please wear gloves to perform this step.
Diagram Description: An illustration shows two types of propellers, labeled 'A' and 'B', and how they attach to the drone's motor shafts. An inset shows the propeller being twisted into place on the motor.

STEP 6. INSTALL THE ANTENNA.

Align the antenna with the Professional Video Drone.
Turn clockwise to fasten it.
Make sure antenna is straight and in line with the undercarriage.
Diagram Description: An illustration shows the antenna being aligned and twisted onto the drone's body.

STEP 7. INSTALL TRANSMITTER BATTERIES.

Open the transmitter battery cover and take out the battery holder.
Insert 8 AA batteries (not included) according to the correct polarity.
Insert the plug into the power jack.
Fasten the cover with a screw.
Diagram Description: A sequence of three illustrations shows: 1) opening the transmitter cover and removing the battery holder, 2) installing 8 AA batteries according to polarity, and 3) inserting the plug into the power jack and fastening the cover.

STEP 8. CALIBRATE THE TRANSMITTER.

Push the left joystick to the TOP LEFT and the right joystick to the TOP RIGHT. Hold them in this position and turn on the transmitter. The LCD screen will show “Calibrate Stick.”
Move the joysticks in a circling motion about three times. Then release and press any trim button to save stick calibration.

STEP 9. CALIBRATE THE DRONE COMPASS.

After the drone powers on, the blue LEDs of the drone will blink in a rotating pattern.
Put the drone on a level surface and do not move it.
The transmitter display will show “Check Compass” indicating that the drone is checking the compass.
Keep the drone on a level surface and slowly rotate it until the “Check Compass” disappears.
NOTE: Do not calibrate this drone near a strong magnetic field. Do not calibrate this drone while you are carrying keys, magnets or mobile phones on your person.

STEP 10. PREPARE FOR TAKEOFF!

Make sure the transmitter and drone have full battery power.
Make sure the propellers are tight, not damaged and installed correctly.
Check the gimbal installation.
Make sure all motors are working before takeoff.
If you have never flown this model before, please refer Section 9 (Page 23) of your User's Guide for basic flight instructions.

Consult the full User's Guide for information about formatting the memory card, recording video and other advanced features.

WARNING: The Professional Video Drone is not a toy. Improper use of this product will result in serious injury. Be sure to fly this drone in a wide open space, away from people, roads, motor vehicle traffic, airports, air traffic, trees, buildings and power lines. This will promote the safety of yourself and others, and protect your drone from becoming lost or damaged. Be sure to read the complete User's Guide in this package. It is your responsibility to comply with all applicable laws pertaining to remote controlled and unmanned aerial vehicle flight regulations.

CUSTOMER SERVICE / WARRANTY

Sharper Image branded drones and RC quadcopters purchased from SharperImage.com include a 60-day limited replacement warranty. If you have any questions not covered in this manual, please call Sharper Image Customer Service at 1 (877) 210-3449.

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 4 Pages, 579.51KB

204990 Adobe PDF Library 15.0 Adobe InDesign CC 2017 (Macintosh)

Related Documents

	Sharper Image Video Streaming Drone User Manual - Setup, Operation, and Troubleshooting Comprehensive user manual for the Sharper Image Video Streaming Drone. Learn how to set up, charge, pair, operate, and troubleshoot your drone for optimal flight and video streaming.
	Sharper Image Drone Aero Stunt LED: Quick Start Guide & Troubleshooting Learn how to operate, perform stunts, and troubleshoot your Sharper Image Drone Aero Stunt LED with this comprehensive quick start guide. Includes pre-flight checks, pairing instructions, charging details, and safety warnings.
	Sharper Image Lighted Drone Owner's Manual - Item 206083 Comprehensive owner's manual for the Sharper Image Lighted Drone (Item No. 206083), covering features, specifications, battery charging, transmitter setup, drone pairing, flight controls, stunt flips, trimming, calibration, headless mode, auto hover, FCC compliance, and warranty information.
	Sharper Image Stealth Recon Drone 1018820 - Instruction Manual Comprehensive instruction manual for the Sharper Image Stealth Recon Drone (Model 1018820). Learn how to set up, pair, fly, and maintain your drone, including safety precautions and troubleshooting.
	Sharper Image LED Stunt Drone User Manual and Operating Guide Comprehensive guide for the Sharper Image LED Stunt Drone, covering setup, operation, safety warnings, and troubleshooting. Learn how to charge the battery, install remote batteries, pair the drone, control flight, perform stunts, and land safely.
	Sharper Image DX-2 Stunt Drone Rechargeable 2.4GHz User Manual User manual for the Sharper Image DX-2 Stunt Drone, a rechargeable 2.4GHz remote-controlled drone. Includes setup, operation, safety warnings, and troubleshooting.
	Sharper Image Streaming Video Drone User Manual Get started with your Sharper Image Streaming 2.4 GHz Video Drone. This guide provides essential information on setup, safe operation, battery charging, remote control features, and troubleshooting tips for an optimal flying experience.
	Sharper Image Video Streaming Drone User Manual This user manual provides instructions and safety warnings for the Sharper Image Video Streaming Drone. Learn how to charge the drone, pair the remote, operate the controls, use different flight modes, and troubleshoot common issues.