IOEM22 2-Channel Line-Output Converter
Introducing the ultimate solution for turbocharging your car audio experience: our 2-Channel Line-Output Converter! Here's why you absolutely need to get your hands on this sleek and powerful device.
Features
- 2-Channel (2 IN / 2 OUT) Line-Output Converter
- Ideal Interface For Adding an Aftermarket Amplifier
- Single Dial, Precision Matched, Stereo & Level Gain Adjustment
- Up to 40 Volts RMS High Level Input Sensitivity
- Up to 9.5 Volts RMS Low-level RCA Output
- Selectable 20Ω / 600Ω / 20kΩ Load Input Impedance
- Selectable GND / ISO / 2000 Ground Isolation
- Dimensions: 3.74” x 3.9" x 0.94" (95.1 x 99.2 x 24 mm)
Specifications
| UNIT | VALUE |
|---|---|
| Channels | 2 IN / 2 OUT |
| Operating Voltage | 9V–16V |
| Max Input Level (20kΩ Load Setting) | 40V / 400W @ 4 Ohms |
| Auto Turn On | DC Offset / Remote |
| Output Voltage MAX @ 13.8V | 9.5V RMS |
| Turn On Trigger (DC-Offset) | 3V–7V |
| Load Input Impedance | 20Ω, 600Ω, 20kΩ |
| Output Impedance | <120Ω |
| Variable Gain Adjustment | -28dB–+1dB |
| Signal To Noise | >110dBA @ 6.4V Output |
| THD+N | < 0.01% |
| Input Sensitivity | 0.5V–40V |
| Frequency Response | 10Hz–20kHz |
| Current Draw (Max) | 40mA |
| Low Pass Filter | <250Hz |
| Bass Boost | 0dB to +12dB |
| Clip Indicator | YES |
| Remote Level Control | N/A |
| Chassis Type | Stamped Steel |
| Terminal Gauge | 18AWG / Quick Connect |
Diagram Description
The diagram illustrates the connection points and system integration for the IOEM22 converter. It depicts the converter unit with clearly labeled terminals for power, ground, and remote turn-on signals. It also shows the audio input and output connections. The diagram visually represents how the converter connects to a car's head unit and speakers, facilitating the integration of aftermarket amplifiers into the vehicle's audio system.
