Xiaomi Mi Router 4C Setup and Management
All images are for illustration purposes only and may differ from the actual product by model and region.
Step 1: Connect the cables
Power on the router, then connect the Internet (WAN) port to the DSL/Cable/satellite modem.
If your Internet network is connected via an Ethernet cable at the wall, connect the Ethernet cable directly to the Internet (WAN) port on the router.
Connections:
- Connect the power adapter to the router and a power outlet.
- Connect the router's Internet (WAN) port to your DSL/Cable/Satellite modem using an Ethernet cable.
Step 2: Set up the network connection
-
Connect to Wi-Fi: Using a phone or computer, connect to the Wi-Fi network broadcast by the router. The Wi-Fi name can be found on the panel at the base of the router (default name: Xiaomi_XXXX). No password is required for initial connection.
Wait until the system indicator light turns blue. Search for the Wi-Fi network and connect.
- Access Setup Page: Open a web browser and navigate to miwifi.com or enter the IP address 192.168.31.1. You should be automatically directed to the landing page for connecting to the Internet.
-
Enter Broadband Credentials: Enter the account name and password provided by your broadband provider, then click Next. This step may be skipped depending on your internet connection type.
If you have forgotten your broadband account name or password, contact your broadband provider.
-
Set Wi-Fi and Admin Passwords: Set a new Wi-Fi name and administrator password. You can choose to use your Wi-Fi password as your administrator password as well.
Please wait until the indicator light turns blue and stops flashing, then reconnect to the Wi-Fi.
Network established successfully ✔️
Manage Mi Wi-Fi
The web management website is miwifi.com and supports basic Internet functions.
Scan the QR code to download the Mi WiFi app and manage your router anytime, anywhere.
- QoS (Quality of Service) ⚙️
- Unauthorized access prevention ?️
- Wi-Fi optimization ?
- More features ...
FAQ
I have finished setting up my network. Why can't I connect to the Internet?
Step 1: Use your phone to search for the Wi-Fi network set by your router. If you can't find it, make sure that the router is connected to the power and has finished booting up.
Step 2: Connect your phone to your router's Wi-Fi network, go to "miwifi.com," and try to fix the problem based on the network diagnostics results.
I've forgotten the administrator password for my router. What should I do?
If you haven't set a specific password, your administrator password will be the same as your Wi-Fi password. Try using this to log in. If the problem persists, it is recommended that you restore your router to the factory settings, then set up the network again.
How do I restore my router to the factory settings?
First, make sure that the router has finished booting up. Then, hold down the Reset button at the base of the router for more than 5 seconds and release it when the system status light turns orange. When the router finishes booting up again, the reset was successful.
What do the different indicator lights mean on the router?
There are two indicator lights on the front panel: the network status light (blue) and the system status light (three colors: blue, orange, and purple).
Indicator Light Status:
| Indicator | Status | Description |
|---|---|---|
| Network status light | Off | Nothing is plugged into the external Internet port or there is a problem with the connection. |
| Network status light | On | Network connection normal. |
| Network status light | Flashing | Sending or receiving data. |
| System status light | Off | Switched off or not connected to the power. |
| System status light | Orange | System updating (flashing), system booting up (on, not flashing). |
| System status light | Blue | Functioning normally (on, not flashing). |
| System status light | Purple | Safe mode (flashing), system failure (on, not flashing). |
Product Specifications and Compliance
The product can be used within all European Union countries (BE/FR/DE/IT/LU/NL/DK/IE/GB/GR/PT/ES/AT/FI/SE/CY/CZ/EE/HU/LV/LT/MT/PL/SK/SI/BG/RO/HR).
Maximum operating temperature: 40°C
Operating frequency (maximum transmitted power): 2400 MHz - 2483.5 MHz (20dBm)
RF exposure warning: To comply with CE RF exposure requirements, the device must be installed and operated at least 20cm (8 inches) or more between the product and all persons' bodies.
POWER ADAPTER OUTPUT: 5V=1A
Use only power supplies listed in the user manual / user instruction.
POWER ADAPTER Model: RD0501000-C55-123OGD
Manufactured by: Shenzhen Ruide Electronic Industrial Co., Ltd.
Name: Mi Router 4C
Model: R4CM
Manufactured by: Xiaomi Communications Co., Ltd.
Address: 9F, Second stages, The Rainbow City of China Resources, NO.68, Qinghe Middle Street, Haidian District, Beijing, China
Importer: Beryko s.r.o.
Address: Na Roudné 1162/76, 301 00 Plzeň
Website: www.beryko.cz
CE ☍
Beryko.cz
