VENTO INHOME (MINI) W S11
HEAT RECOVERY SINGLE-ROOM UNITS
Features
- inHome is a brand new dMVHR solution for newbuild and retrofit single-room applications, offering efficient and cost-effective ventilation.
- New and stylish design of the indoor unit fits into any interior.
- Built-in light sensor controls the brightness of the control panel LEDs and activates night mode automatically.
- Built-in humidity sensor allows the unit to automatically select the mode, control the humidity level, and prevent mold growth.
- Silent operation, making it perfect for living spaces.
- High efficiency (up to 95%) heat recovery to reduce energy costs and help save on heating and air conditioning.
- Air flow: up to 50 m³/h (14 l/s)
- Heat recovery efficiency: up to 95%
- Power: from 1.0 W
- SFP: from 0.62 W/l/s
- Noise level: from 10 dBA
⚙️ EC motor | ? Wi-Fi READY | ?️ Alexa | ▶️ works with Hey Google
Design
The VENTO INHOME W S11 features a decorative front panel, a fan with a reversible EC motor, a ceramic enthalpy heat exchanger (regenerator), G3 filter, noise insulating material, and an air duct, connected to an outer ventilation hood. It is available in black or white modifications.
The VENTO INHOME MINI W unit shares similar components. The fan status is indicated by shutters: "The fan is off (the shutters are closed)" and "The fan is on (the shutters are opened)".
Filters include ISO Coarse >50% (G3) and optionally ISO ePM1 60% (F7).
Operation and Control
Low power consumption ensures suitability for continuous operation without significant impact on energy bills. Units can be connected into a one-system network without wires. Remote management is possible via a remote control or smartphone. Mounting is easy through external walls without complex ducting.
Operation within a network guarantees balanced ventilation. Higher supply air purification is achievable with an optional ISO ePM1 60% (F7) filter. External sensors can be connected, and an automatic shutter can prevent undesired external entry when the unit is turned off (optional).
Designation Key
| Model | Control | Air duct | Ventilation hood type | Front panel |
|---|---|---|---|---|
| Vento inHome / Vento inHome mini | _: sensor control panel or remote controller W: sensor control panel, remote controller, or mobile application via Wi-Fi |
_: integrated automatic air shutters M: without integrated automatic air shutters |
_: white plastic hood AH-10 white 160 (standard walls) S11: white plastic hood AH-11 white 160 (standard walls) S: metal hood (thin walls) |
_: white BLK: black |
Control System
Ventilators can be networked for centralized control. For Wi-Fi versions, units connect wirelessly. Signals from the control panel, remote control, smartphone (optional), or humidity sensor are received by the master (main) ventilator.
The Blauberg Home app for Android or iOS devices is available on Google Play and the App Store.
Unit operation can also be controlled via the sensor control panel on the unit casing or the remote control. Available controls include:
- ON/OFF button
- 3 speed settings
- Ventilation mode
- Heat recovery mode
- Night timer (low speed for 8 hours)
- Party timer (high speed for 4 hours)
The Vento inHome features a humidity sensor. If indoor humidity exceeds a set point, the unit automatically boosts to speed III.
Energy Recovery
Unit Operating Logic in Winter Period
The unit operates in two phases, each lasting 70 seconds:
- Phase 1 (Air extraction from the premise): Warm stale air is extracted from the room, passing through the ceramic heat exchanger and transferring its heat and moisture to it.
- Phase 2 (Air supply to the room): Clean cold intake air flows through the now-warmed heat exchanger, absorbing accumulated heat and humidity.
When the ceramic heat exchanger warms up, the unit switches to the supply mode. When it cools down, it switches back to the extract air mode, ensuring continuous heat recovery.
Mounting
The unit is designed for through-the-wall installation into a prepared hole in an outer wall. For optimal ventilation, pairwise installation of reverse-phase synchronized units is recommended, where some units supply fresh air and others extract stale air, creating efficient balanced ventilation.
For new construction, installation occurs in two stages:
- Pre-installation of the air duct and outer ventilation hood during indoor finishing and outer decorative wall finishing.
- Completion of installation before commissioning, including the indoor unit with controller, shutters, cartridge, heat exchanger, fan, and filters.
Technical Data
| Parameters | Vento inHome W | Vento inHome mini W | ||||
|---|---|---|---|---|---|---|
| I | II | III | I | II | III | |
| Speed | 100-240 | |||||
| Voltage [V / 50 (60) Hz] | 100-240 | |||||
| Power [W] | 1.1 | 2.0 | 3.4 | 1.0 | 1.6 | 3.0 |
| Current [A] | 0.03 | 0.04 | 0.05 | 0.02 | 0.03 | 0.04 |
| Air flow in ventilation mode [m³/h (l/s)] | 15 (4) | 35 (10) | 50 (14) | 8 (2) | 16 (4) | 25 (7) |
| Air flow in energy recovery mode [m³/h (l/s)] | 8 (2) | 15 (4) | 25 (7) | 4 (1) | 8 (2) | 13 (3) |
| SFP [W/l/s] | 0.53 | 0.48 | 0.49 | 0.90 | 0.72 | 0.86 |
| Filter | ISO Coarse >50% (G3) (ISO Coarse >60% (G4), ISO ePM1 60% (F7) optional) | |||||
| Transported air temperature [°C] | -20...+40 | -15...+40 | ||||
| Sound pressure level at 1 m distance [dBA] | 20 | 30 | 36 | 20 | 26 | 33 |
| Sound pressure level at 3 m distance [dBA] | 11 | 21 | 27 | 10 | 16 | 23 |
| Outdoor sound pressure attenuation in accordance with DIN EN 20140 [dBA] | 40 / 44 | |||||
| Heat recovery efficiency | up to 95% | up to 81% | ||||
| Protection class | IP24 | |||||
VENTO inHome W: Energy efficiency class A+, Air flow 50 m³/h, Sound pressure level 41 dBA.
VENTO inHome mini W: Energy efficiency class A, Air flow 25 m³/h, Sound pressure level 37 dBA.
Accessories
A range of accessories is available for installation and customization:
Pre-installation Kits
- Pre-installation Kit Vento inHome / Vento inHome mini: For mounting into walls with standard thickness. Includes air duct, AH-11 white 160 outer ventilation hood, polystyrene foam plug, and polystyrene foam wedges.
- Pre-installation Kit Vento inHome S / Vento inHome mini S: For mounting into thin walls. Includes air duct, AH-S chrome 160 outer ventilation hood, polystyrene foam plug, and polystyrene foam wedges.
Completion Kits
- Completion Kit Vento inHome / Vento inHome mini: Final mounting kit including cartridge with heat exchanger, fan, G3 filters, indoor unit with controller and shutters, and remote control.
Filters
- FP2 Vento G3 / FP3 Vento G3: G3 filters (2 pcs.).
- FP2 Vento G4: Coarse filter set including plastic filter holder (1 pc.) and G4 filter (1 pc.).
- FPC 150x50 G4: G4 coarse filter.
- FP2 Vento F7: Filter set including plastic filter holder (1 pc.) and F7 fine filter (1 pc.) with filtration rate PM2.5 > 70%.
- FPC 150x50 F7: F7 fine filter with filtration rate PM2.5 > 70%.
Outer Ventilation Hoods
- AH-8 white 160 / AH-8 white 100: White painted aluminium outer ventilation hood with frost protection.
- AH-8 chrome 160 / AH-8 chrome 100: Brushed stainless steel outer ventilation hood with frost protection.
- AH-10 *colour* 160 / AH-10 *colour* 100: Plastic outer ventilation hood available in white, black, grey, terra cotta, brown, vintage.
- AH-10 chrome 160 / AH-10 chrome 100: Plastic outer ventilation hood with a plate with brushed stainless steel effect finish.
- AH-11 *colour* 160 / AH-11 *colour* 100: Plastic outer ventilation hood available in various colours.
- AH-S white 160 / AH-S white 100: Stainless steel ventilation hood, painted white.
- AH-S chrome 160 / AH-S chrome 100: Brushed stainless steel ventilation hood.
- PP 160/0.5: Outer ventilation hood for mounting from inside.
Mounting Kits
- KIT BlauPlast white 160 / KIT BlauPlast white 100: Kit for angular mounting with white colour grille (for walls with standard thickness).
- KIT BlauPlast chrome 160 / KIT BlauPlast chrome 100: Kit for angular mounting with stainless steel outer grille (for walls with standard thickness).
Air Ducts
- R 160-500 / R 100-500: 500 mm air duct and polystyrene foam plug.
- R 160-700 / R 100-700: 700 mm air duct and polystyrene foam plug.
Control and Sensors
- FB Vento Expert A50: Remote control.
- CD-1: CO2 sensor with LED CO2 indication and a sensor button for operation mode selection.
- CD-2: CO2 sensor.
