Rogue Performance Monitor

Button Functions

Select Button: Confirms function during pages.
Up Button: Used to move forward.
Down Button: Used to move downward.
Home Button:
- At main menu, short press 4 times to enter sleep mode.
- In other pages, returns to the previous page.
- In workout mode, activates "workout finish" selection dialogue.
Display Button:
- In workout mode, cycles through 5 different data layouts.
- In custom interval setting and other defined pages, acts as a right shift function.
Units Button:
- In workout mode, cycles through 4 screen displays for units.
- In custom interval setting and other defined pages, acts as a left shift function.
Comp Button: Hold for 2 seconds to activate competition mode. In this mode, console timeout changes to 12 hours, and the LED light flashes continuously.

Reset Function

To reset, press the Units and Display buttons simultaneously, then press and hold the Reset button for 7 seconds. The screen will display "setting factory defaults". Releasing the buttons will initiate the reset. Caution: Resetting will clear all data and restore factory settings.

Display Information and Modes

Workout Modes

The console displays various workout data. In interval workout reset mode, the current interval number is shown. Lower time/500m indicates greater effort.

Data Display Layouts

The Display button cycles through 5 data layouts in workout mode. The Units button cycles through 4 unit displays.

Specific Data Displays

The main display can show accumulated distance, watts, time/500m, or calories per hour, providing immediate feedback on workout intensity.

In 'just row' and 'single target' workout modes, the left side of the display can show elapsed time, remaining workout time, watts, calories, or time/500m.

An additional data position can display average time/500m, average watts, or accumulated calories for the current workout.

In 'just row' mode, this position shows estimated distance per 30 minutes. In interval or single target modes, it shows target finish time or distance. In interval rest mode, it displays total finish distance.

Heart Rate Monitoring

Your heart rate is displayed if the M2 console is connected to a compatible heart rate belt and worn correctly.

Other Display Information

The display can also show your stroke rate (strokes per minute) and split workout results. In interval mode, the interval number is displayed.

Diagram Descriptions

The console unit is depicted with a screen displaying 'ROGUE', date, and menu options like 'SELECT WORKOUT', 'CONNECT', 'MEMORY', 'REPEAT', 'MORE OPTIONS'. Buttons labeled 'SELECT', 'UP', 'DOWN', 'HOME', 'UNITS', and 'DISPLAY' are shown. A close-up view shows the back of the unit with various ports and connectors.

The console screen is shown displaying various workout metrics, including heart rate, distance, time/500m, watts, and stroke rate. Different display configurations are illustrated, showing how data like accumulated distance, average time/500m, and split results are presented. A diagram illustrating FCC regulatory conformance is also present.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, designed to provide reasonable protection against harmful interference in residential installations. It generates, uses, and can radiate radio frequency energy. If it causes interference, users are encouraged to try correcting it by reorienting/relocating the antenna, increasing separation between equipment and receiver, or connecting to a different circuit. Consult a dealer or technician for assistance.

The manufacturer is not responsible for interference caused by unauthorized modifications, which could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits for an uncontrolled environment.

	Rogue Home Timer Quick Start Guide A concise guide to setting up and operating the Rogue Home Timer, featuring interval training modes, Bluetooth connectivity, and customizable workout programs.
	Rogue FM-HR Functional Trainer Twin Weight Stack Assembly Manual This document provides comprehensive assembly instructions, a detailed parts list, and essential safety information for the Rogue FM-HR Functional Trainer with Twin Weight Stacks. Learn about included tools and proper setup procedures from Rogue Fitness.
	The Bella Complex Challenge: Rules, Scoring, and Submission Guidelines Comprehensive guide to The Bella Complex Challenge hosted by Rogue. Details include challenge scoring, deadlines, eligibility by division and age group, required equipment, permitted and prohibited items, movement standards for Clean, Shoulder to Overhead, and Front Squat, the competition flow, and detailed video submission requirements.
	The Waiter Walk Challenge: Rules and Submission Guidelines Detailed rules, divisions, equipment requirements, movement standards, and video submission guidelines for The Waiter Walk Challenge by Rogue.
	Rogue Echo Bike Parts List & Diagram \| Rogue Fitness Find the official parts list and diagram for the Rogue Echo Bike. Identify all components, including stabilizers, wheels, and hardware, for maintenance and assembly.